ASTM E2114-19

Standard Terminology for Sustainability Relative to the Performance of Buildings

SCOPE
1.1 This terminology2 consists of terms and definitions pertaining to sustainable development and, in particular, to sustainability relative to the performance of buildings.  
1.2 The purpose of this terminology is to provide meanings and explanations of terms applicable to sustainable development. In the interest of common understanding and standardization, consistent word usage is encouraged to help eliminate the major barrier to effective technical communication.  
1.3 It is recommended that terms used only within an individual standard, and having a meaning unique to that standard, be defined or explained in the terminology section of that individual standard.  
1.4 Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right margin following the definition and is listed in Section 2.  
1.5 Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Historical
• Publication Date: 31-Dec-2018
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.040.01 - Buildings in general
• Technical Committee: E60 - Sustainability
• Drafting Committee: E60.21 - Terminology

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E2114 − 19
Standard Terminology for
1
Sustainability Relative to the Performance of Buildings
This standard is issued under the fixed designation E2114; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* E833 Terminology of Building Economics
2
E943 Terminology Relating to Biological Effects and Envi-
1.1 This terminology consists of terms and definitions
ronmental Fate
pertaining to sustainable development and, in particular, to
E1705 Terminology Relating to Biotechnology
sustainability relative to the performance of buildings.
4
2.2 ISO Standard:
1.2 The purpose of this terminology is to provide meanings
ISO 14040 Life Cycle Assessment—Principles and Frame-
and explanations of terms applicable to sustainable develop-
work
ment. In the interest of common understanding and
standardization, consistent word usage is encouraged to help
3. Terminology
eliminate the major barrier to effective technical communica-
3.1 Definitions:
tion.
alternative agricultural products, n—bio-based industrial
1.3 It is recommended that terms used only within an
products (non-food, non-feed) manufactured from agricul-
individual standard, and having a meaning unique to that
tural materials and animal by-products.
standard, be defined or explained in the terminology section of
alternative energy, n—see renewable energy.
that individual standard.
bioaccumulation, n—the net accumulation of a substance by
1.4 Certain standard definitions herein are adopted from
an organism as a result of uptake from all environmental
other sources. Each is an exact copy.The source is identified at
sources. (E943)
therightmarginfollowingthedefinitionandislistedinSection
2.
biobased products, n—products fabricated from alternative
1.5 Terms are listed in alphabetical sequence. Compound agricultural materials and forestry materials, or both.
terms appear in the natural spoken order.
biodegradable, adj—capable of decomposing under natural
1.6 This international standard was developed in accor-
conditions into elements found in nature.
dance with internationally recognized principles on standard-
biodiversity, n—the variability among living organisms from
ization established in the Decision on Principles for the
all sources including: terrestrial, marine, and other aquatic
Development of International Standards, Guides and Recom-
ecosystems and the ecological complexes of which they are
mendations issued by the World Trade Organization Technical
apart;thisincludesdiversitywithinspecies,betweenspecies
Barriers to Trade (TBT) Committee.
and of ecosystems.
2. Referenced Documents
biological control agents, n—living organisms used to elimi-
3
2.1 ASTM Standards:
nate or regulate the population of other living organisms.
D1356 Terminology Relating to Sampling and Analysis of
biological diversity, n—see biodiversity.
Atmospheres
E631 Terminology of Building Constructions
biomagnification, n—the increase in tissue concentration of
poorly depurated materials in organisms along a series of
1
predator-preyassociations,primarilythroughthemechanism
This terminology is under the jurisdiction of ASTM Committee E60 on
Sustainability and is the direct responsibility of Subcommittee E60.21 on Termi-
of dietary accumulation. (E943)
nology.
Current edition approved Jan. 1, 2019. Published January 2019. Originally
biomass, n—(1) All living material in a given area. (2) Any
approved in 2000. Last previous edition approved in 2017 as E2114–17. DOI:
material which is or was a living organism or excreted from
10.1520/E2114–19.
a microorganism.
2
Boldfaced terms are defined in this terminology.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
4
Standards volume information, refer to the standard’s Document Summary page on Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
the ASTM website. 4th Floor, New York, NY 10036, http://www.ansi.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E2114 − 19
DISCUSSION—It often refers to vegetation.
electromagnetic spectrum, n—a continuum of electric and
magnetic radiation, encompassing all wavelengths from
building, n—(1) A shelter comprising a partially or totally
electricity, radio and microwaves, at the low-frequency end
enclosed space, erected by means of a planned process of
to infrared, visible ligh
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E2114 − 17 E2114 − 19
Standard Terminology for
1
Sustainability Relative to the Performance of Buildings
This standard is issued under the fixed designation E2114; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
2
1.1 This terminology consists of terms and definitions pertaining to sustainable development and, in particular, to sustainability
relative to the performance of buildings.
1.2 The purpose of this terminology is to provide meanings and explanations of terms applicable to sustainable development.
In the interest of common understanding and standardization, consistent word usage is encouraged to help eliminate the major
barrier to effective technical communication.
1.3 It is recommended that terms used only within an individual standard, and having a meaning unique to that standard, be
defined or explained in the terminology section of that individual standard.
1.4 Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right
margin following the definition and is listed in Section 2.
1.5 Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
3
2.1 ASTM Standards:
D1356 Terminology Relating to Sampling and Analysis of Atmospheres
E631 Terminology of Building Constructions
E833 Terminology of Building Economics
E943 Terminology Relating to Biological Effects and Environmental Fate
E1705 Terminology Relating to Biotechnology
4
2.2 ISO Standard:
ISO 14040 Life Cycle Assessment—Principles and Framework
3. Terminology
3.1 Definitions:
alternative agricultural products, n—bio-based industrial products (non-food, non-feed) manufactured from agricultural
materials and animal by-products.
alternative energy, n—see renewable energy.
bioaccumulation, n—the net accumulation of a substance by an organism as a result of uptake from all environmental sources.
(E943)
biobased products, n—products fabricated from alternative agricultural materials and forestry materials, or both.
1
This terminology is under the jurisdiction of ASTM Committee E60 on Sustainability and is the direct responsibility of Subcommittee E60.01 on Buildings and
Construction.
Current edition approved Feb. 1, 2017Jan. 1, 2019. Published March 2017January 2019. Originally approved in 2000. Last previous edition approved in 20082017 as
E2114-08.–17. DOI: 10.1520/E2114-17.10.1520/E2114–19.
2
Boldfaced terms are defined in this terminology.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
4
Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E2114 − 19
biodegradable, adj—capable of decomposing under natural conditions into elements found in nature.
biodiversity, n—the variability among living organisms from all sources including: terrestrial, marine, and other aquatic
ecosystems and the ecological complexes of which they are a part; this includes diversity within species, between species and
of ecosystems.
biological control agents, n—living organisms used to eliminate or regulate the population of other living organisms.
biological diversity, n—seebiodiversity.
biomagnification, n—the increase in tissue concentration of poorly depurated materials in organisms along a series of
predator-prey associations, primarily through the mechanism of dietary accumulation. (E943)
biomass, n—(1) All living material in a given area. (2) Any material which is or was a living organism or excreted from a
microorganism
...