Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

SCOPE
1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows:
1.1.1 Grade 1 - Unalloyed titanium,
1.1.2 Grade 2 - Unalloyed titanium,Grade 2H
Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),
1.1.3 Grade 3 - Unalloyed titanium,
1.1.4 Grade 4 - Unalloyed titanium,
1.1.5 Grade 5 - Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.6 Grade 6 - Titanium alloy (5 % aluminum, 2.5 % tin),
1.1.7 Grade 7 - Unalloyed titanium plus 0.12 to 0.25 % palladium,Grade 7H
Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),
1.1.8 Grade 9 - Titanium alloy (3.0 % aluminum, 2.5 % vanadium),
1.1.9 Grade 11 - Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.10 Grade 12 - Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.11 Grade 13 - Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 14 - Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.13 Grade 15 - Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.14 Grade 16 - Unalloyed titanium plus 0.04 to 0.08 % palladium,Grade 16H
Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
1.1.15 Grade 17 - Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.16 Grade 18 - Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium.
1.1.17 Grade 19 - Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.18 Grade 20 - Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,
1.1.19 Grade 21 - Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.20 Grade 23 - Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),
1.1.21 Grade 24 - Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.22 Grade 25 - Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,
1.1.23 Grade 26 - Unalloyed titanium plus 0.08 to 0.14 % ruthenium,Grade 26H
Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
1.1.24 Grade 27 - Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.25 Grade 28 - Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.26 Grade 29 - Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,
1.1.27 Grade 30 - Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.28 Grade 31 - Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.29 Grade 32 - Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.30 Grade 33 - Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.31 Grade 34 - Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.32 Grade 35 - Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1.1.33 Grade 36 - Titanium alloy (45 % niobium),
1.1.34 Grade 37 - Titanium alloy (1.5 % aluminum), and
1.1.35 Grade 38 - Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).Note 1
H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use.
The H grades were added in response to a user association request based on its study of over 5200 commercial Grade 2, 7, 16, and 26 test reports, where over 99 % met the 58 ksi minimum UTS.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

General Information

Status
Historical
Publication Date
30-Nov-2006
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM B265-06b - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
REDLINE ASTM B265-06b - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B 265 – 06b
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 %
2 vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1 This specification covers annealed titanium and tita-
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 %
nium alloy strip, sheet, and plate as follows:
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)
1.1.1 Grade 1—Unalloyed titanium,
plus 0.04 % to 0.08 % palladium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 %
1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58
aluminum, 2.7 % niobium, 0.25 % silicon),
ksi minimum UTS),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 %
1.1.3 Grade 3—Unalloyed titanium,
vanadium with extra low interstitial elements, ELI),
1.1.4 Grade 4—Unalloyed titanium,
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 %
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vana-
vanadium) plus 0.04 % to 0.08 % palladium,
dium),
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 %
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 %
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 %
palladium,
palladium,
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 %
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 %
ruthenium,
palladium (Grade 7 with 58 ksi minimum UTS),
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 %
0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
vanadium),
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 %
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 %
ruthenium,
palladium,
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 %
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum,
vanadium) plus 0.08 to 0.14 % ruthenium,
0.8 % nickel),
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 %
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 %
vanadiumwithextralowinterstitialelements,ELI)plus0.08to
ruthenium),
0.14 % ruthenium,
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 %
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 %
ruthenium),
palladium),
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 %
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 %
ruthenium),
palladium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 %
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin,
palladium,
1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 %
0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 %
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 %
palladium,
palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 %
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 %
vanadium) plus 0.04 to 0.08 % palladium.
molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1.1.33 Grade 36—Titanium alloy (45 % niobium),
1
This specification is under the jurisdiction of ASTM Committee B10 on
1.1.34 Grade 37—Titanium alloy (1.5 % aluminum), and
Reactive and Refractory Metals and Alloys and is the direct responsibility of
1.1.35 Grade 38—Titanium alloy (4 % aluminum, 2.5 %
Subcommittee B10.01 on Titanium.
vanadium, 1.5 % iron).
Current edition approved Dec. 1, 2006. Published December 2006. Originally
approved in 1952. Last previous edition approved in 2006 as B 265 – 06a.
2 NOTE 1—H grade material is identical to the corresponding numeric
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
grade (that is, Grade 2H = Grade 2) except for the higher guaranteed
cations SB-265 in Section II of that Code.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B 265 – 06b
A
TABLE 1 Tensile Requirements
B
Tensile Strength, min Yield Strength, 0.2 % Offset Bend Test
Elongation in
min max Under 0.070 in. 0.070 to 0.187 in.
Grade 2 in. or 50 mm,
ksi MPa (1.8 mm) in (1.8–4.75 mm) in
min, %
ksi MPa ksi MPa
Thickness Thickness
1 35 240 20 138 45 310 24 3T 4T
2 50 345 40 275 65 450 20 4T 5T
C,D
2H 58 400 40 275 65 450 20 . .
3 65 450 55
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:B265–06a Designation: B 265 – 06b
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope
2
1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows:
1.1.1 Grade 1—Unalloyed titanium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),
1.1.3 Grade 3—Unalloyed titanium,
1.1.4 Grade 4—Unalloyed titanium,
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 % vanadium),
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium.
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus
0.04 % to 0.08 % palladium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 %
ruthenium,
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1
This specification is under the jurisdiction of ASTM Committee B10 on Reactive and Refractory Metals and Alloys and is the direct responsibility of Subcommittee
B10.01 on Titanium.
Current edition approved JuneDec. 1, 2006. Published JuneDecember 2006. Originally approved in 1952. Last previous edition approved in 2006 as B 265 – 06a.
2
For ASME Boiler and Pressure Vessel Code applications see related Specifications SB-265 in Section II of that Code.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B 265 – 06b
1.1.33 Grade 36—Titanium alloy (45 % niobium),
1.1.34 Grade 37—Titanium alloy (1.5 % aluminum), and
1.1.35 Grade 38—Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).
NOTE 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum
UTS, and may always be certified as meeting the r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.