iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1882-04

(Specification)

Standard Specification for Residential Basketball Systems

Standard Specification for Residential Basketball Systems

SCOPE
1.1 This specification covers the manufacture, assembly, recommended maintenance and use of complete residential basketball systems.
1.2 This specification is intended to reduce the potential hazards associated with the installation and use of residential basketball systems.
1.3 This specification is not intended to apply to the following:
1.3.1 Equipment intended to be used in places of public assembly, such as, but not limited to, schools, parks, public and private recreational facilities.
1.3.2 Individual components, such as rim, backboard, pole, portable base system, net, or other component when that component is not sold as a complete residential basketball system as defined in this specification.
1.3.3 Any residential basketball system that is mounted to any structure or surface other than that which is purchased as part of a complete residential basketball system. Examples include, but are not limited to, roof mounting, wall mounting, or any locally or self-manufactured components.
1.3.4 Any basketball equipment that does not use a full size rim, 18-in. (45.72-cm) diameter, or is designed for operational heights of less then 6 ft 6 in. (1.98 m) from the playing surface to the bottom of the backboard.
1.3.5 Accessories and add-ons.
1.4 This specification shall apply only to products manufactured after six months from the date this specification is published.
1.5 This specification does not cover product performance or quality, except as related to safety.
1.6 The tests are intended to uncover hazards, rather than to demonstrate the reliability of the system. The fact that a mechanism or material of a system fails during testing only is relevant if the failure creates a potential hazard.
1.7 The rationale for provisions in this specification are given in Appendix X1 and Appendix X2.
1.8 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
31-May-2004
ICS
97.220.10 - Sports facilities
Technical Committee
F08 - Sports Equipment, Playing Surfaces, and Facilities
Drafting Committee
F08.25 - Recreational Basketball Equipment
Current Stage
Ref Project

Relations

Replaces
ASTM F1882-98 - Standard Specification for Residential Basketball Systems
Effective Date
01-Jun-2004
Replaced By
ASTM F1882-06 - Standard Specification for Residential Basketball Systems
Effective Date
01-May-2006

Buy Standard

ASTM F1882-04 - Standard Specification for Residential Basketball SystemsASTM F1882-04 - Standard Specification for Residential Basketball Systems
PreviousNext
Technical specification
ASTM F1882-04 - Standard Specification for Residential Basketball Systems
English language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 1882 – 04
Standard Specification for
1
Residential Basketball Systems
This standard is issued under the fixed designation F 1882; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 1.7 The rationale for provisions in this specification are
given in Appendix X1 and Appendix X2.
1.1 This specification covers the manufacture, assembly,
1.8 The values stated in inch-pound units are to be regarded
recommended maintenance and use of complete residential
as the standard. The values given in parentheses are for
basketball systems.
information only.
1.2 This specification is intended to reduce the potential
1.9 This standard does not purport to address all of the
hazards associated with the installation and use of residential
safety concerns, if any, associated with its use. It is the
basketball systems.
responsibility of the user of this standard to establish appro-
1.3 This specification is not intended to apply to the
priate safety and health practices and determine the applica-
following:
bility of regulatory limitations prior to use.
1.3.1 Equipment intended to be used in places of public
assembly,suchas,butnotlimitedto,schools,parks,publicand
2. Referenced Documents
private recreational facilities.
2
2.1 ASTM Standards:
1.3.2 Individual components, such as rim, backboard, pole,
D 2240 Test Method for Rubber Property—Durometer
portable base system, net, or other component when that
Hardness
component is not sold as a complete residential basketball
C 1048 Specification for Heat-Treated Flat Glass—Kind
system as defined in this specification.
HS, Kind FT Coated and Uncoated Glass
1.3.3 Any residential basketball system that is mounted to
F 1148 Consumer Safety Performance Specification for
any structure or surface other than that which is purchased as
Home Playground Equipment
part of a complete residential basketball system. Examples
2.2 Federal Standards:
include, but are not limited to, roof mounting, wall mounting,
16 CFR 1303 Ban of Lead-Containing Paint and Certain
or any locally or self-manufactured components.
3
Consumer Products Bearing Lead-Containing Paint
1.3.4 Any basketball equipment that does not use a full size
16 CFR 1500.48 Technical Requirements for Determining a
rim, 18-in. (45.72-cm) diameter, or is designed for operational
Sharp Point in Toys and Other Articles Intended for Use
heights of less then 6 ft 6 in. (1.98 m) from the playing surface
3
by Children Under 8-Years of Age
to the bottom of the backboard.
16 CFR 1500.49 Technical Requirements for Determining a
1.3.5 Accessories and add-ons.
Sharp Metal or Glass Edge in Toys and Other Articles
1.4 This specification shall apply only to products manufac-
3
Intended for Use by Children Under 8-Years of Age
tured after six months from the date this specification is
4
2.3 ANSI Z535 Warning Labels
published.
1.5 This specification does not cover product performance
or quality, except as related to safety.
3. Terminology
1.6 The tests are intended to uncover hazards, rather than to
3.1 Definitions of Terms Specific to This Standard:
demonstrate the reliability of the system. The fact that a
mechanism or material of a system fails during testing only is
relevant if the failure creates a potential hazard.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Standards volume information, refer to the standard’s Document Summary page on
1
This specification is under the jurisdiction ofASTM Committee F08 on Sports the ASTM website.
3
Equipment and Facilities and is the direct responsibility of F08.25 on Recreational Available from the Consumer Product Safety Commission, Washington, DC
Basketball Equipment. 20207.
4
Current edition approved June 1, 2004. Published June 2004. Originally Available from National Electrical Manufacturers Association (NEMA), 1300
approved in 1998. Last previous edition approved in 1998 as F 1882 – 98. N. 17th St., Suite 1847, Rosslyn, VA 22209.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
F1882–04
3.1.1 accessories and add-ons (items not covered in 3.1.3, 5. Performance Requirements
3.1.6, 3.1.10 and 3.1.16–3.1.17), n—including but not limited
5.1 General—The standards listed in 5.3-5.6 apply only to
to,suchthingsasballreturns,scoringandtrainingdevices,and
the normal access area as described in 3.1.11 and Fig. 1.
including items attached to the system no
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F1777-19(2023)(Practice)
Standard Practice for Paintball Game Site Operation

ABSTRACT
This practice sets forth procedures for operating a paintball playing field. The goal is to assist paintball field operators in running a safe business. Like any other physical activity, paintball presents a potential for injury. No procedural practice can prevent all injuries, especially when paintball players do not follow safety instructions. The ultimate responsibility for preventing injury lies with the paintball player. This practice, however, intends to promote safe paintball field operation through standardization of operating practice.
SCOPE
1.1 This practice establishes minimum safety requirements for the operation of paintball playing game sites, and provides for certain materials and procedures required.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F1015-21(Test Method)
Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces

SIGNIFICANCE AND USE
5.1 Data obtained from the procedure of this test method are indicative of the relative abrasiveness of fabric or carpet type synthetic playing surfaces.
SCOPE
1.1 This test method is applicable to both laboratory and field measurement of synthetic turf surfaces used for sports.  
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM F2940-21(Practice)
Standard Practice for Air Soft Field Operation

ABSTRACT
This practice sets forth procedures for the operation of air soft playing fields, intended to assist air soft field operators in running a safe business. It covers eye protection devices suitable for use in air soft games, including goggles, and recommends the minimum engagement distance between the shooter and the target at which a shot may be fired. It also requires the conspicuous posting of player safety rules, printed in 24-point type or larger, at the registration area.
SCOPE
1.1 This practice establishes minimum safety requirements for the operation of air soft playing fields, and provides for certain materials and procedures required.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM F3188-16(2021)(Specification)
Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials

ABSTRACT
This specification covers all extractable hazardous metals (man-made or natural) that are intended for use as infill materials for synthetic turf sports surfaces. It specifies the amount of certain metals that have the potential to be extracted from synthetic turf infill materials if ingested. The time, temperature, and pH of the extraction fluid approximate the conditions the infill material would experience in the stomach during the digestive process. The levels of extractable metals are compared to maximum levels allowed in children's toys.
This specification includes requirements with respect to performance (hazardous metal content), test methods, sampling, apparatus, reagents, and procedure.
SIGNIFICANCE AND USE
7.1 This test method is based on subsection 8.3 of Consumer Safety Specification F963, which specifies a test procedure to determine the amount of hazardous metals that have the potential to be present in toys and handled or ingested by children. Since it is possible for users of synthetic turf playing surfaces to handle or ingest particles of synthetic turf infill materials, it is necessary to determine the level of hazardous metals in the synthetic turf infill materials. The limits of hazardous metals used in this specification are based on those specified in Consumer Safety Specification F963, adjusted for statistical error correction factor as described in Consumer Safety Specification F963.
SCOPE
1.1 This specification relates to the amount of certain metals that have the potential to be extracted from synthetic turf infill materials if ingested. The time, temperature, and pH of the extraction fluid approximate the conditions the infill material would experience in the stomach during the digestive process. The levels of extractable metals are compared to maximum levels allowed in children’s toys.  
1.2 This specification applies to all materials (man-made or natural) that are intended for use as infill materials for synthetic turf sports surfaces.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F2765-14(2021)(Specification)
Standard Specification for Total Lead Content in Synthetic Turf Fibers

ABSTRACT
This specification details the test methods for sample preparation and analyzing, as well as guidelines for reporting the total lead content in fibers used in synthetic turf. Synthetic turf fibers shall be tested at such quantity intervals as to ensure continuing compliance with test requirements. The measured total lead content shall be within the limit specified herein.
SCOPE
1.1 This specification applies to the maximum content of lead in fibers used in synthetic turf.  
1.1.1 This specification outlines a test method for sample preparation and a test method for analyzing the total lead content in synthetic turf fibers.  
1.1.2 This specification outlines guidelines for reporting total lead content in synthetic turf fibers.  
1.2 This specification applies only to synthetic turf fibers manufactured after Sept. 1, 2009.  
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F3496-20(Specification)
Standard Specification for Polyaromatic Hydrocarbon (PAH) Content in Synthetic Turf Infill

SCOPE
1.1 This specification applies to the maximum content of eight PAHs (PAH8) in materials used as synthetic turf infill.  
1.2 This specification outlines a test method for sample preparation and the method for analyzing the content of the eight PAHs in synthetic turf infill.  
1.3 This specification provides guidelines for reporting the content of the eight PAHs in the synthetic turf infill.  
1.4 This specification is applicable to any infill material used in synthetic turf.  
1.5 The values stated in SI units are to be regarded as standard. No other units are included in this standard.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F3189-20(Test Method)
Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete

SIGNIFICANCE AND USE
5.1 The dynamic interaction between the athlete and the synthetic turf surface affects the comfort and the performance of the athlete. Interaction with a surface that has low amounts of deformation and shock absorption allows the player to run fast and turn quickly, but has the potential to cause discomfort and damage to the lower extremity joints. Synthetic turf surfaces having high deformation have lower energy restitution. Less of the energy exerted by the athlete returns from the surface, possibly increasing the fatigue for the performing athlete.
SCOPE
1.1 This test method specifies a method for measuring force reduction, vertical deformation, and energy restitution of synthetic turf surfaces.  
1.2 This method is used to characterize properties of synthetic turf systems including the turf fabric, infill material, and shock pad (if applicable).  
1.3 It can be used for characterizing synthetic turf systems in laboratory environment or in the field.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM F3339-20(Guide)
Standard Guide for Construction or Renovation of Native-soil Athletic Fields

SIGNIFICANCE AND USE
4.1 A dense, uniform, smooth and vigorously growing natural turfgrass sports field provides the ideal and preferred playing surface for most outdoor field sports. Such a surface is pleasing to the spectators and athletes. A thick, consistent and smooth grass cover also increases playing quality and safety by providing stable footing for the athletes, cushioning their impact from falls, slides or tackles and cools the playing surface during hot weather.  
4.2 Sand is commonly used to construct high performance athletic field rootzone systems. Sand is chosen as the primary construction material for two basic properties; compaction resistance and improved drainage/aeration state. Although sand-based fields generally provide for a higher level of performance, the costs associated with constructing/developing a proper, high-performance sand-based field often precludes its use for many athletic field construction projects. In these instances soil-based fields constructed with either native or imported soils; either topsoil or subsoil material modified to mimic the properties of a natural topsoil (a manufactured topsoil). These soils are sometimes modified with amendments to improve their performance properties either at the time of original construction or during a subsequent renovation. Although not approaching the same performance properties of a proper sand-based field construction; the implementation of proper design, construction, and athletic field maintenance can produce soil-based athletic field rootzones with acceptable performance characteristics.  
4.3 Properties of both the soil and grass plants must be considered in planning, constructing, and maintaining a high quality athletic field installation. Turfgrass utilized must be adapted to the local growing conditions and be capable of forming a thick, dense, turf cover at the desired mowing height. Soil-based fields provide varying levels of soil stability but such conditions often deteriorate rapidly under hi...
SCOPE
1.1 This guide covers techniques that are appropriate for the construction of athletic field rootzones using native-soil. This guide is also applicable to soils which are not native to the site but are natural (non-sand) imported soils. This guide provides guidance for the selection of soil materials, amendments, and methods for use in constructing these types of athletic field rootzones. Soils having a texture of Sandy Loam or coarser should be utilized for soil-based rootzone construction. Soils which are finer textured than listed above may be employed for rootzone construction but should be sand-modified to meet the performance criteria of this standard. If fields are constructed with soils which are finer textured, they will not be capable of meeting the performance criteria in this standard. Despite performance limitations, fields which are constructed with finer textured soils (due to logistics or budget constraints) may still be able to conform to the slope/grade criteria (see 5.1, 5.4, and Table 1). Sand modified rootzone constructions are not addressed by this standard.  
1.2 Decisions in selecting construction and maintenance techniques are influenced by existing soil types, climatic factors, level of play, intensity and frequency of use, equipment available, budget and training, and the ability of management personnel.  
1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.  
1.4 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. This ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, ...

  • Guide
    7 pages
    English language
    sale 15% off
ASTM
ASTM F2107-08(2020)(Guide)
Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields

SIGNIFICANCE AND USE
4.1 The skinned areas of baseball and softball fields should provide a uniform playing surface of high quality. Ball bounce should be true and predictable. Footing and sliding properties should favor optimum performance of players. Undulations, rough surface, hard or soft surfaces, weeds, stones, and wet spots detract from good play. Playing surface quality is largely affected by construction and maintenance procedures, and this standard guide addresses those procedures. While warning tracks are a type of skinned area found on baseball and softball fields, this standard does not apply to warning tracks. A separate standard, Guide F2270, presents information pertaining to warning tracks.  
4.1.1 During construction, consideration should be given to factors such as the physical and chemical properties of materials used in the area, freedom from stones and other debris, and surface and internal drainage.  
4.1.2 Maintenance practices that influence the playability of the surface include edging, dragging, rolling, watering, vegetation control, brushing or hosing to prevent buildup of a lip of mineral matter in turfgrass at the skinned/turfed edges, and removal of stones and debris that may adversely affect play and safety.  
4.2 Those responsible for the design, construction, or maintenance, or a combination thereof, of skinned areas on baseball and softball fields will benefit from this guide.  
4.3 This guide provides flexibility in choices of procedures and can be used to cover a variety of use and budget levels.
SCOPE
1.1 This guide covers techniques that are appropriate for the construction and maintenance of skinned areas on baseball and softball fields. This guide provides guidance for the selection of materials, such as soil, sand, gravel, crushed stone, crushed brick, calcined clay, calcined diatomaceous earth, vitrified clay, etc., for use in constructing or reconditioning skinned areas and for the selection of management practices that will maintain a safe and playable skinned surface. Although this guide is specific to baseball/softball, it has application to other sports where ball bounce, ball roll, or player footing, or a combination thereof, are of importance.  
1.2 Decisions in selecting construction and maintenance techniques are influenced by existing soil types, climatic factors, level of play, intensity of use, equipment available, budget, and training and ability of management personnel.  
1.3 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only.  
1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This guide offers an organized collection of information or a series of options and does not recommend a specific course of action. This document cannot replace education or experience and should be used in conjunction with professional judgment. Not all aspects of this guide may be applicable in all circumstances. The ASTM standard is not intended to represent or replace the standard of care by which the adequacy of a given professional service must be judged, nor should this document be applied without consideration of a project’s many unique aspects. The word “Standard” in the title of this document means only that the document has been approved through the ASTM consensus process.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Tra...

  • Guide
    8 pages
    English language
    sale 15% off
ASTM
ASTM F3415-20(Test Method)
Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces

SIGNIFICANCE AND USE
5.1 To test the shear strength of a materials describing how the material resists sliding of surface layers. Data from these tests are used to calculate the friction angle and cohesion of a surface sample. This test can be used to help determine if a material falls within a suitable for equine sports surfaces.
SCOPE
1.1 This adapted test method covers the determination of strength and stress-strain relationships of a cylindrical specimen of a compacted, drained cohesive natural or synthetic soil surface used in equine sports surfaces. Specimens are isotropically consolidated and sheared in compression at a constant rate of axial deformation (strain controlled).  
1.2 The shear strength of an equine sports surface material describes the resistance of the material to sliding of the surface layers. Shear strength influences both slide and penetration of the hoof in the track surface. It is generally accepted that a small amount of slide on impact is desirable (1-3).2 However, the surface must have sufficient shear strength to support the horse during propulsion (1-5). Thus, an optimal shear strength would be expected for an equestrian surface.  
1.3 To determine the shear strength of an equine sports surface, a representative dirt or synthetic sample is placed into a cylindrical cell and a vertical load is applied. Shear strength is measured as per the procedures outlined in Test Method D4767 for lab-consolidated samples. This ASTM standard was adapted by Racing Surfaces Testing Laboratory for the drained condition to more accurately model the conditions of an equestrian surface.  
1.4 Dirt samples are tested over a range of forming moisture contents to determine the maximum bulk density and optimal forming moisture content for a given energy input. The dirt samples are then compacted at this optimal moisture content. The maximum stress failure criteria is assumed and results are presented as the failure stress at 15 psi confining pressure versus sample forming moisture content, along with friction angle and cohesion.  
1.5 Synthetic samples with good drainage are tested at a 4% forming moisture content, and over a specified range of temperatures. The temperature is controlled using a heated/refrigerated water bath with a triaxial cell cap fitted with a copper coil. Failure criteria is assumed under similar conditions for the dirt surfaces, and results are presented as the failure stress at 15 psi confining pressure versus sample temperature, along with friction angle and cohesion.  
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off