ASTM F934-96(2022)

Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

ABSTRACT
This specification covers standard colors for coated chain link fence materials such as chain link fence fabric, tension wire, posts, rails, gate frames, and fittings. Standard polymer colors include dark green, olive green, brown, and black.
SCOPE
1.1 This specification covers standard colors for coated chain link fence materials such as chain link fence fabric, tension wire, posts, rails, gate frames, and fittings.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 31-Oct-2022
• ICS: 91.090 - External structures
• Technical Committee: F14 - Fences
• Drafting Committee: F14.40 - Chain Link Fence and Wire Accessories

Relations

• Refers: ASTM D2244-15a - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Aug-2015
• Refers: ASTM D2244-15 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Jan-2015
• Refers: ASTM D2244-15e1 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Jan-2015
• Refers: ASTM D2244-14 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-May-2014
• Refers: ASTM D2244-11 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Jun-2011
• Refers: ASTM G90-10 - Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
• Effective Date: 01-Jun-2010
• Refers: ASTM D1729-96(2009) - Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
• Effective Date: 01-Dec-2009
• Refers: ASTM D2244-09a - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Aug-2009
• Refers: ASTM D2244-09 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Jul-2009
• Refers: ASTM D2244-07e1 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-May-2007
• Refers: ASTM D2244-07 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-May-2007
• Refers: ASTM D2244-05 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 01-Oct-2005
• Refers: ASTM G90-05 - Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
• Effective Date: 01-Oct-2005
• Refers: ASTM D1729-96(2003) - Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
• Effective Date: 01-Dec-2003
• Refers: ASTM D2244-02e1 - Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
• Effective Date: 10-Jun-2002

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F934 −96 (Reapproved 2022)
Standard Specification for
Standard Colors for Polymer-Coated Chain Link Fence
Materials
ThisstandardisissuedunderthefixeddesignationF934;thenumberimmediatelyfollowingthedesignationindicatestheyearoforiginal
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D2244 Practice for Calculation of Color Tolerances and
Color Differences from Instrumentally Measured Color
1.1 This specification covers standard colors for coated
Coordinates
chain link fence materials such as chain link fence fabric,
G90 Practice for Performing Accelerated Outdoor Weather-
tension wire, posts, rails, gate frames, and fittings.
ing of Materials Using Concentrated Natural Sunlight
1.2 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
3. Color
responsibility of the user of this standard to establish appro-
3.1 Unless otherwise stipulated by the purchaser, determine
priate safety, health, and environmental practices and deter-
the color in accordance with the standard contained in Table 1.
mine the applicability of regulatory limitations prior to use.
3.2 Determine compliance with this requirement by com-
1.3 This international standard was developed in accor-
parison of specimens of the coated materials to standard flat
dance with internationally recognized principles on standard-
specimens of fused film of approximately the thickness speci-
ization established in the Decision on Principles for the
fied for the coating to be applied to the materials, and
Development of International Standards, Guides and Recom-
1 1
measuring at least 1 ⁄2 by 1 ⁄2 in. (38 by 38 mm).
mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
3.3 Prepare standard flat specimens for the evaluation of
colorcoatingbyduplicatingtheproductionprocessasnearlyas
2. Referenced Documents
possible including temperature, particle size, etc.
2.1 ASTM Standards:
3.4 Determine the color of the standard flat specimens in
D1729 Practice for Visual Appraisal of Colors and Color
accordance with Test Method D2244 and Practice D1729.
Differences of Diffusely-Illu
...