Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

SCOPE
1.1 This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of bituminous paving materials.
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on bituminous paving materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This specification may be supplemented by more specific criteria, such as that in Specification E329, and requirements for particular projects.
1.3 This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of bituminous paving materials.  
1.4  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
09-Jul-2002
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM D3666-02 - Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
English language
6 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: D 3666 – 02
Standard Specification for
Minimum Requirements for Agencies Testing and Inspecting
1
Road and Paving Materials
This standard is issued under the fixed designation D 3666; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
4
1. Scope and-Ball Apparatus)
D 70 Test Method for Specific Gravity and Density of
1.1 This specification covers the minimum requirements for
3
Semi-Solid Bituminous Materials (Pycnometer Method)
field and laboratory personnel, for establishing and maintaining
D 92 Test Method for Flash and Fire Points by Cleveland
a quality system, and establishes minimum qualifications for
5
Open Cup
agencies engaged in the testing and inspection of road and
3
D 113 Test Method for Ductility of Bituminous Materials
paving materials.
3
D 139 Test Method for Float Test for Bituminous Materials
1.2 Criteria are provided for evaluating the capability of an
3
D 244 Test Methods for Emulsified Asphalts
agency to properly perform designated tests on road and paving
6
D 290 Practice for Bituminous Mixing Plant Inspection
materials, and for establishing guidelines pertaining to an
D 1074 Test Method for Compressive Strength of Bitumi-
agency’s organization, personnel, facilities, and quality system.
3
nous Mixtures
This specification may be supplemented by more specific
D 1075 Test Method for Effect of Water on Compressive
criteria, such as that in Specification E 329, and requirements
3
Strength of Compacted Bituminous Mixtures
for particular projects.
D 1559 Test Method for Resistance to Plastic Flow of
1.3 This specification can be used as a basis to evaluate
7
Bituminous Mixtures Using Marshall Apparatus
testing or inspection agencies, or both, and is intended for use
D 1560 Test Methods for Resistance to Deformation and
for the qualifying or accrediting, or both, of testing or
Cohesion of Bituminous Mixtures by Means of Hveem
inspection agencies, public or private, engaged in the testing
3
Apparatus
and inspection of road and paving materials.
D 1561 Practice for Preparation of Bituminous Mixture Test
1.4 This standard does not purport to address all of the
3
Specimens by Means of California Kneading Compactor
safety concerns, if any, associated with its use. It is the
D 1754 Test Method for Effects of Heat and Air on Asphal-
responsibility of the user of this standard to establish appro-
3
tic Materials (Thin-Film Oven Test)
priate safety and health practices and determine the applica-
D 1856 Test Method for Recovery of Asphalt from Solution
bility of regulatory limitations prior to use.
3
by Abson Method
2. Referenced Documents D 2041 Test Method for Theoretical Maximum Specific
3
Gravity and Density of Bituminous Paving Mixtures
2.1 The following referenced documents are those that are
D 2170 Test Method for Kinematic Viscosity of Asphalts
specifically mentioned in Specification D 3666. These refer-
3
(Bitumens)
enced documents are not meant to be all inclusive, as Speci-
D 2171 Test Method for Viscosity of Asphalts by Vacuum
fication D 3666 applies, as appropriate, to all test methods
3
Capillary Viscometer
under the jurisdiction of Committee D04.
D 2872 Test Method for Effect of Heat and Air on a Moving
2.2 ASTM Standards:
3
Film of Asphalt (Rolling Thin-Film Oven Test)
C 128 Test Method for Density, Relative Density (Specific
2
D 3142 Test Method for Density of Liquid Asphalts (Hy-
Gravity) and Absorption of Fine Aggregate
3
3
drometer Method)
D 5 Test Method for Penetration of Bituminous Materials
D 3143 Test Method for Flash Point of Cutback Asphalt
D 36 Test Method for Softening Point of Bitumen (Ring-
3
with Tag Open-Cup Apparatus
D 4402 Test Method for Viscosity Determination of Asphalt
1
This specification is under the jurisdiction of ASTM Committee D04 on Road
and Paving Materials and is the direct responsibility of Subcommittee D04.95 on
Quality Control, Inspection, and Testing Agencies.
4
Current edition approved July 10, 2002. Published September 2002. Originally Annual Book of ASTM Standards, Vol 04.04.
5
published as D 3666 – 78. Last previous edition D 3666 – 01. Annual Book of ASTM Standards, Vol 05.01.
2 6
Annual Book of ASTM Standards, Vol 04.02. Discontinued; see 2000Annual Book of ASTM Standards, Vol 04.03.
3 7
Annual Book of ASTM Standards, Vol 04.03. Discontinued; see 1989 Annual Book of ASTM Standards, Vol 04.03.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ---------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.