ASTM F821/F821M-01(2018)

Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

ABSTRACT
This specification covers the design and dimensional requirements for the construction of standard and custom-built interior steel doors and frames intended for use in staterooms, lavatories, passageways, and other weather-protected areas of ships, including U.S. Coast Guard certificated vessels, with domestic routes. The doors and frames are to be of hollow metal construction with the door insulated for sound or fire. The doors and frames shall conform to the specified dimensional and construction procedures established for each class and type, which shall be indicated in the ordering information.
SCOPE
1.1 This specification covers the construction of standard and custom-built interior steel doors and frames for ships including U.S. Coast Guard certificated vessels with domestic routes.  
1.2 Doors and frames are to be hollow metal construction with the door insulated for sound or fire.  
1.3 The doors are intended for use in staterooms, lavatories, passageways, and other areas protected from weather.  
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Historical
• Publication Date: 31-Mar-2018
• ICS: 47.020.10 - Hulls and their structure elements
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F821/F821M − 01 (Reapproved 2018) An American National Standard
Standard Specification for
1
Domestic Use Doors and Frames, Steel, Interior, Marine
This standard is issued under the fixed designation F821/F821M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E136 Test Method for Behavior of Materials in a Vertical
Tube Furnace at 750°C
1.1 This specification covers the construction of standard
and custom-built interior steel doors and frames for ships 2.2 Code of Federal Regulations (CFR) Title 46—
3
including U.S. Coast Guard certificated vessels with domestic Shipping:
routes. Subchapter D—Tank Vessels Subpart 32.57—Structural Fire
Protection
1.2 Doors and frames are to be hollow metal construction
Subchapter H—Passenger Vessels Subpart 72.05—
with the door insulated for sound or fire.
Structural Fire Protection
1.3 The doors are intended for use in staterooms, lavatories,
Subchapter I—Cargo and Miscellaneous Vessels Subpart
passageways, and other areas protected from weather.
92.07—Structural Fire Protection
Subchapter T—Small Passenger Vessels Subpart 177.300—
1.4 The values stated in either inch-pound units or SI units
are to be regarded separately as standard. Within the text, the Hull Structure
Subchapter U—Oceanographic Vessels Subpart 190.07—
SI units are shown in brackets. The values stated in each
system are not exact equivalents; therefore, each system must Structural Fire Protection
Structural Insulations Subpart 164.007
be used independently of the other.
Structural Insulations Subpart 164.107
1.5 This international standard was developed in accor-
Noncombustible Materials for Merchant Vessels Subpart
dance with internationally recognized principles on standard-
164.009
ization established in the Decision on Principles for the
Noncombustible Materials Subpart 164.109
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical 2.3 Builders Hardware Manufacturers Association
4
Barriers to Trade (TBT) Committee. (BHMA):
A 156.18 Materials and Finishes
2. Referenced Documents 5
2.4 U.S. Public Health Service:
2
2.1 ASTM Standards: Publication No. 393 Handbook on Sanitation of Vessel
A240/A240M Specification for Chromium and Chromium- Construction
Nickel Stainless Steel Plate, Sheet, and Strip for Pressure
Vessels and for General Applications 3. Terminology
A582/A582M Specification for Free-Machining Stainless
3.1 Definitions of Terms Specific to This Standard:
Steel Bars
3.1.1 hands of doors—a term used to describe a door from
A1008/A1008M Specification for Steel, Sheet, Cold-Rolled,
the outside or key side of the door.
Carbon, Structural, High-Strength Low-Alloy, High-
3.1.2 right-hand regular door—a door having hinges on the
Strength Low-Alloy with Improved Formability, Solution
right side when swinging door away from the individual
Hardened, and Bake Hardenable
opening it.
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships
3
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on Available from U.S. Government Printing Office, Superintendent of
Outfitting and Deck Machinery. Documents, 732 N. Capitol St., NW, Washington, DC 20401-0001, http://
Current edition approved April 1, 2018. Published May 2018. Originally www.access.gpo.gov.
4
approved in 1983. Last previous edition approved in 2012 as F821/F821M – 01 Available from Builders Hardware Manufacturers Association (BHMA), 355
(2012). DOI: 10.1520/F0821_F0821M-01R18. Lexington Ave., 15th Floor, New York, NY 10017, https://
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or www.buildershardware.com.
5
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Available from U.S. Public Health Services, Division of Engineering Services,
Standards volume information, refer to the standard’s Document Summary page on Parklawn Library, Room 1315, 5600 Fishers Lane, Rockville, MD 20857, https://
the ASTM website. www.usphs.gov.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F821/F821M − 01 (2018)
3.1.3 left-hand regular door—a door having hinges on the 5. Ordering Information
left side when swinging door away from the individual opening
5.1 Orders for items under this specification shall include
it.
the following information by the purchaser:
3.1.4 right-hand reverse bevel door—a door having hinges
5.1.1 Class A-O, A, B, or C.
on right side whe
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F821/F821M − 01 (Reapproved 2012) F821/F821M − 01 (ReapprovedAn American National2018)Standard
Standard Specification for
1
Domestic Use Doors and Frames, Steel, Interior, Marine
This standard is issued under the fixed designation F821/F821M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This specification covers the construction of standard and custom-built interior steel doors and frames for ships including
U.S. Coast Guard certificated vessels with domestic routes.
1.2 Doors and frames are to be hollow metal construction with the door insulated for sound or fire.
1.3 The doors are intended for use in staterooms, lavatories, passageways, and other areas protected from weather.
1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units
are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used
independently of the other.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
A240/A240M Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and
for General Applications
A582/A582M Specification for Free-Machining Stainless Steel Bars
A1008/A1008M Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength
Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
E136 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
3
2.2 Code of Federal Regulations (CFR) Title 46—Shipping:
Subchapter D—Tank Vessels,Vessels Subpart 32.57—Structural Fire Protection
Subchapter H—Passenger Vessels,Vessels Subpart 72.05—Structural Fire Protection
Subchapter I—Cargo and Miscellaneous Vessels,Vessels Subpart 92.07—Structural Fire Protection
Subchapter T—Small Passenger Vessels,Vessels Subpart 177.300—Hull Structure
Subchapter U—Oceanographic Vessels,Vessels Subpart 190.07—Structural Fire Protection
Structural Insulations,Insulations Subpart 164.007
Structural Insulations,Insulations Subpart 164.107
Noncombustible Materials for Merchant Vessels,Vessels Subpart 164.009
Noncombustible Materials,Materials Subpart 164.109
4
2.3 Builders Hardware Manufacturers Association, Inc.:Association (BHMA):
A 156.18 Materials and Finishes
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
Outfitting and Deck Machinery.
Current edition approved June 1, 2012April 1, 2018. Published October 2012May 2018. Originally approved in 1983. Last previous edition approved in 20012012 as
ε1
F821/F821M – 01 (2007)(2012). . DOI: 10.1520/F0821_F0821M-01R12.10.1520/F0821_F0821M-01R18.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Available from the Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402.Superintendent of Documents, 732 N. Capitol St., NW,
Washington, DC 20401-0001, http://www.access.gpo.gov.
4
Available from BHMA, Inc., Builders Hardware Manufacturers Association (BHMA), 355 Lexington Ave., 17th15th Floor, New York, NY 10017.10017,
https://www.buildershardware.com.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F821/F821M − 01 (2018)
5
2.4 U.S. Public Health Service:
Publication No. 393,393 Handbook on Sanitation of Vessel Construction
3. Terminology
3.1 Definitions of Terms Specific to This Standard:
3.1.1 hands of doors—a term used to describe a door from the outside or key side of the door.
3.1.2 right-hand regular door—a door having hinges on the right side when swinging door away from the individual opening
i
...