ASTM F1071-94(2023)

Standard Specification for Expanded-Metal Bulkhead Panels

ABSTRACT
This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards. Bulkhead panels are furnished in three types as follows: type I - universal bulkhead panels for use as both a right-hand or left-hand panel, type II - right-hand bulkhead panel, and type III - left-hand bulkhead panel. Bulkhead panels are furnished in two classes as follows: class A - bulkhead panels, 2 ft; and class B - bulkhead panels, 3 ft. Expanded-metal panels shall be free from all cracks, burrs, sharp edges, and other defects. The panel manufacturer shall apply a nonhazardous corrosion-inhibiting primer coating to all panel assemblies.
SCOPE
1.1 This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 30-Jun-2023
• ICS: 47.020.10 - Hulls and their structure elements
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Relations

• Refers: ASTM D3951-18(2023) - Standard Practice for Commercial Packaging
• Effective Date: 01-Oct-2023
• Refers: ASTM D3951-18 - Standard Practice for Commercial Packaging
• Effective Date: 01-May-2018
• Refers: ASTM D3951-15 - Standard Practice for Commercial Packaging
• Effective Date: 01-Dec-2015
• Refers: ASTM A36/A36M-12 - Standard Specification for Carbon Structural Steel
• Effective Date: 01-Nov-2012
• Refers: ASTM D3951-10 - Standard Practice for Commercial Packaging
• Effective Date: 15-Aug-2010
• Refers: ASTM A36/A36M-08 - Standard Specification for Carbon Structural Steel
• Effective Date: 15-May-2008
• Refers: ASTM A36/A36M-05 - Standard Specification for Carbon Structural Steel
• Effective Date: 01-Mar-2005
• Refers: ASTM A36/A36M-04 - Standard Specification for Carbon Structural Steel
• Effective Date: 01-Apr-2004
• Refers: ASTM A36/A36M-03a - Standard Specification for Carbon Structural Steel
• Effective Date: 10-May-2003
• Refers: ASTM A36/A36M-03 - Standard Specification for Carbon Structural Steel
• Effective Date: 10-Apr-2003
• Refers: ASTM A36/A36M-02 - Standard Specification for Carbon Structural Steel
• Effective Date: 10-Dec-2002
• Refers: ASTM A36/A36M-00a - Standard Specification for Carbon Structural Steel
• Effective Date: 10-Sep-2001
• Refers: ASTM A36/A36M-01 - Standard Specification for Carbon Structural Steel
• Effective Date: 10-Sep-2001
• Refers: ASTM D3951-98(2004) - Standard Practice for Commercial Packaging
• Effective Date: 10-Nov-1998
• Refers: ASTM D3951-98 - Standard Practice for Commercial Packaging
• Effective Date: 10-Nov-1998

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F1071 − 94 (Reapproved 2023) An American National Standard
Standard Specification for
Expanded-Metal Bulkhead Panels
This standard is issued under the fixed designation F1071; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3.2.1 Class A—Bulkhead panels, 2 ft (610 cm).
3.2.2 Class B—Bulkhead panels, 3 ft (915 cm).
1.1 This specification covers steel expanded-metal bulkhead
panels suitable for use in storerooms, shops, and as protection
3.3 Bulkhead panels Types II and III, Class A only, are
against personnel hazards.
furnished in three sizes as follows.
3.3.1 Size 1—76 in. (195 cm) high.
1.2 The values stated in inch-pound units are to be regarded
as standard. The values given in parentheses are mathematical 3.3.2 Size 2—64 in. (165 cm) high.
conversions to SI units that are provided for information only 3.3.3 Size 3—40 in. (100 cm) high.
and are not considered standard.
4. Ordering Information
1.3 This international standard was developed in accor-
dance with internationally recognized principles on standard-
4.1 Orders for expanded-metal panels under this specifica-
ization established in the Decision on Principles for the
tion shall include this specification number, type, class, and
Development of International Standards, Guides and Recom-
size.
mendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committee.
5. Materials and Manufacture
5.1 Materials—See Table 1.
2. Referenced Documents
5.2 Manufacture:
2.1 ASTM Standards:
A36/A36M Specification for Carbon Structural Steel 5.2.1 Welding shall be in accordance with AWS D1.1 or the
ABS Rules for Building and Classing Steel Vessels.
D3951 Practice for Commercial Packaging
2.2 Other Documents: 5.2.2 Panels shall be welded and fabricated as shown in
Figs. 1-6.
ABS Rules for Building and Classing Steel Vessels
AWS D1.1 Structural Welding Code 5.2.3 After panels have been shipped to the contractor, the
panels will be assembled into bulkheads by welding or bolting
3. Classification
by others.
3.1 Bulkhead panels are furnished in three types as follows.
6. Tolerances
3.1.1 Type I—Universal bulkhead panels for use as either a
right-hand or left-hand panel.
6.1 Tolerances—6 ⁄16 in. (1.5 mm).
3.1.2 Type II—Right-hand bulkhead panel.
3.1.3 Type III—Left-hand bulkhead panel.
7. Workmanship, Finish, and Appearance
3.2 Bulkhead panels are furnished in two classes as follows.
7.1 Expanded-metal panels shall be free from all cracks,
burrs, sharp edges, and other defects.
This specification is under the jurisdiction of ASTM Committee F25 on Ships
7.2 The panel manufacturer shall apply a nonhazardous
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
corrosion-inhibiting primer coating to all panel assemblies.
Outfitting and Deck Machinery.
Current edition approved July 1, 2023. Published July 2023. Originally approved
in 1987. Last previous edition approved in 2018 as F1071 – 94 (2018). DOI:
8. Packaging and Package Marking
10.1520/F1071-94R23.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
8.1 Expanded-metal bu
...