iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM B887-98

(Test Method)

Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

SCOPE
1.1 This test method covers the determination of magnetization coercivity (Hcs) of cemented carbide materials and products using coercive force instrumentation. It is patterned after ISO 3326.  
This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
09-May-1998
ICS
77.160 - Powder metallurgy
Technical Committee
B09 - Metal Powders and Metal Powder Products
Drafting Committee
B09.06 - Cemented Carbides
Current Stage
Ref Project

Relations

Replaced By
ASTM B887-03 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
Effective Date
10-Apr-2003

Buy Standard

ASTM B887-98 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented CarbidesASTM B887-98 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
PreviousNext
Standard
ASTM B887-98 - Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superceded and replaced by a new version or discontinued.
Contact ASTM International (www.astm.org) for the latest information.
Designation: B 887 – 98
Standard Test Method for
Determination of Coercivity (Hcs) of Cemented Carbides
This standard is issued under the fixed designation B 887; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 5. Significance and Use
1.1 This test method covers the determination of magneti- 5.1 Measurement of coercivity provides a relative compari-
zation coercivity (Hcs) of cemented carbide materials and son of carbide grain size, binder content, and possibly carbon
products using coercive force instrumentation. It is patterned deficiency for a given graded carbide material or product, and
after ISO 3326. may be employed as a non-destructive measurement indicating
1.2 This standard does not purport to address all of the deviation from a specified norm.
safety concerns, if any, associated with its use. It is the 5.2 This test method allows the non-destructive estimate of
responsibility of the user of this standard to establish appro- average carbide grain size in sintered cemented carbide hard-
priate safety and health practices and determine the applica- metals. It is appropriate for a wide range of compositions and
bility of regulatory limitations prior to use. tungsten carbide (WC) WC grain sizes, and can be used for
acceptance of material or product to specification.
2. Referenced Documents
6. Interferences
2.1 ASTM Standards:
A 340 Terminology of Symbols and Definitions Relating to 6.1 Hcs measurement is a non-destructive “bulk” measure-
Magnetic Testing ment that is averaged over the specimen volume. Bi-modal
B 243 Terminology of Powder Metallurgy grain size distributions will give approximately the same Hc
2.2 ISO Standard: value as would be obtained from a normal grain size distribu-
ISO 3326 Hardmetals - Determination of (the Magnetiza- tion about the same mean value.
tion) Coercivity 6.2 Large test specimens must be sized to fit within the
magnetic field coil spacing available for the apparatus em-
3. Terminology
ployed.
3.1 Definitions:
6.3 Small test specimens may be immeasurable if their size
3.1.1 For definition of terms used in this procedure refer to prohibits detection by the magnetic field coils for the apparatus
Terminology A 340 and Terminology B 243.
employed.
3.1.2 dc—direct current 6.4 Specimen shape, that is, symmetry and aspect ratio,
influence Hc measurement values and repeatability of results.
4. Summary of Test Method
Test specimens should be positioned with their long axis in the
4.1 A test sample is positioned in the dc magnetic field of
direction of the magnetic field. Asymetrically shaped test
the test apparatus and magnetized to technical saturation. The
specimens should be tested in several positions, the measure-
magnetic field polarity is then reversed and the test sample is
ment values recorded, and the average value reported.
demagnetized by increasing the energy of the reversed mag-
7. Apparatus
netic field until the test sample reaches zero magnetism. The
coercive force (Hc) is the magnetizing force required to return 7.1 Instrumentation capable of the dc magnetization of
the saturated magnetic induction to zero.
appropriately sized test samples to technical saturation and
accurate measurement of the energy required to restore the
magnetic induction to zero.
This test method is under the jurisdiction of ASTM Committee B-9 on Metal
Powders and Metal Powder Products and is the direct responsibility of Subcom-
8. Procedure
mittee B09.06 on Cemented Carbides.
Current edition approved May 10, 1998. Published November 1998. 8.1 For commercial instrumentation, refer to the equipment
Annual Book of ASTM Standards, Vol 03.04.
op
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM B886-24(Test Method)
Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

SIGNIFICANCE AND USE
5.1 This test method allows the nondestructive measurement of the magnetic fraction of the binder phase in cemented carbide powder materials and sintered product, and may be used as an indirect measure of the carbon level in the material or product.  
5.2 Measurement of magnetic saturation provides a comparison of the relative fraction of magnetic binder phase, that is, cobalt, nickel, or iron, present in the material and can be used for acceptance of product to specification.  
5.3 Measurement of magnetic saturation can be used as a measure of the quality of powder material.
SCOPE
1.1 This test method covers the determination of magnetic saturation (Ms) of cemented carbide powder materials and sintered products using magnetic saturation induction test instrumentation.  
1.2 The values stated in SI units are to be regarded as standard. An exception is the use of Gauss-cm3 per gram, which is a longstanding industry practice.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM B963-24(Test Method)
Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

SIGNIFICANCE AND USE
5.1 Oil content values are generally contained in specifications for oil-impregnated PM bearings.  
5.2 The oil-impregnation efficiency provides an indication of how well the as-received parts had been impregnated.  
5.3 The desired self-lubricating performance of PM bearings requires a minimum amount of surface-connected porosity and satisfactory oil impregnation of the surface-connected porosity. A minimum oil content is specified.  
5.4 The results from these test methods may be used for quality control or compliance purposes.
SCOPE
1.1 This standard describes three related test methods that cover the measurement of physical properties of oil-impregnated powder metallurgy products.  
1.1.1 Determination of the volume percent of oil contained in the material.  
1.1.2 Determination of the efficiency of the oil-impregnation process.  
1.1.3 Determination of the percent surface-connected porosity by oil impregnation.  
1.2 Units—With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the long-standing industry practice, the values in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM B883-24(Specification)
Standard Specification for Metal Injection Molded (MIM) Materials

ABSTRACT
This specification covers ferrous metal injection molded (MIM) materials fabricated by mixing elemental or pre-alloyed metal powders with binders, injecting into a mold, debinding, and sintering with or without subsequent heat treatment. These materials are: low-alloy steel produced from admixtures of iron powder and other alloying elements such as nickel and molybdenum (MIM-2200 and MIM-2700); low-alloy steel produced from admixtures of iron powder and other alloying elements such as nickel, molybdenum, and carbon (MIM-4605); austenitic stainless steel produced from pre-alloyed powder or an admixture of powders (MIM-316L); precipitation hardening stainless steel produced from pre-alloyed powder or an admixture of powders (MIM-17-4 PH); and ferritic stainless steel produced from pre-alloyed powder or an admixture of powders (MIM-430L). Chemical analysis shall be performed for the elements copper, chromium, molybdenum, and nickel. The materials shall be subjected to tensile test and unnotched Charpy impact energy test.
SCOPE
1.1 This specification covers ferrous metal injection molded materials fabricated by mixing elemental or pre-alloyed metal powders with binders, injecting into a mold, debinding, and sintering, with or without subsequent heat treatment.  
1.2 This specification covers the following injection molded materials.  
1.2.1 Compositions:  
1.2.1.1 MIM-2200, low-alloy steel
1.2.1.2 MIM-2700, low-alloy steel
1.2.1.3 MIM-4605, low-alloy steel
1.2.1.4 MIM-4140, low-alloy steel
1.2.1.5 MIM-316L, austenitic stainless steel
1.2.1.6 MIM-17-4 PH, precipitation hardening stainless steel
1.2.1.7 MIM-420, martensitic stainless steel
1.2.1.8 MIM-430L, ferritic stainless steel
1.2.1.9 MIM-440, martensitic stainless steel
1.2.1.10 MIM-Cu, copper  
1.3 Chemical composition limits are specified in Table 1.  
1.4 With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the longstanding industry practice, the values in inch-pound units are to be regarded as standard. The values given in parentheses or in separate tables are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM B887-24(Test Method)
Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

SIGNIFICANCE AND USE
5.1 Measurement of coercivity provides a relative comparison of carbide grain size, binder content, and possibly carbon deficiency for a given graded carbide material or product, and may be employed as a non-destructive measurement indicating deviation from a specified norm.  
5.2 This test method allows the non-destructive estimate of average carbide grain size in sintered cemented carbide hardmetals. It is appropriate for a wide range of compositions and tungsten carbide (WC) WC grain sizes, and can be used for acceptance of material or product to specification.
SCOPE
1.1 This test method covers the determination of magnetization coercivity (Hcs) of cemented carbide materials and products using coercive force instrumentation. It is patterned after ISO 3326.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM B923-23(Test Method)
Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry

SIGNIFICANCE AND USE
5.1 Both suppliers and users of metals can benefit from knowledge of the skeletal density of these materials. Results of many intermediate and final processing steps are controlled by or related to skeletal density of the metal. In addition, the performance of many sintered or cast metal structures may be predicted from the skeletal density of the starting metal powder, for all or a portion of the finished piece.
SCOPE
1.1 This test method covers determination of skeletal density of metal powders. The test method specifies general procedures that are applicable to many commercial pycnometry instruments. The method provides specific sample outgassing procedures for listed materials. It includes additional general outgassing instructions for other metals. The ideal gas law forms the basis for all calculations.  
1.2 This test method does not include all existing procedures appropriate for outgassing metal materials. The included procedures provided acceptable results for samples analyzed during an interlaboratory study. The investigator shall determine the appropriateness of listed procedures.  
1.3 Units—With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the longstanding industry practice, the values in SI units are to be regarded as standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM B657-23(Guide)
Standard Guide for Metallographic Identification of Microstructure in Cemented Carbides

SIGNIFICANCE AND USE
4.1 The microstructure of a cemented carbide affects the material's mechanical and physical properties. This guide is not intended to be used as a specification for carbide grades. Producers and users may use the microstructural information as a guide in developing their own specifications.
SCOPE
1.1 This guide covers apparatus and procedures for the metallographic identification of microstructures in cemented carbides.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Precautions applying to use of hazardous laboratory chemicals should be observed for chemicals specified in Table 1.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    5 pages
    English language
    sale 15% off
  • Guide
    5 pages
    English language
    sale 15% off
ASTM
ASTM B962-23(Test Method)
Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

SIGNIFICANCE AND USE
5.1 The volume of a complex shaped PM part cannot be measured accurately using micrometers or calipers. Since density is mass per unit volume, a precise method for measuring the volume is needed. Archimedes’ principle may be used to calculate the volume of water displaced by an immersed object. For this to be applicable to PM materials that contain surface connected porosity, the surface pores are sealed by oil impregnation or some other means.  
5.2 The green density of compacted parts or test pieces is normally determined to assist during press set-up, or for quality control purposes. It is also used for determining the compressibility of base powders, mixed powders, and premixes.  
5.3 The sintered density of sintered PM parts and sintered PM test specimens is used as a quality control measure.  
5.4 The impregnated density of sintered bearings is normally measured for quality control purposes as bearings are generally supplied and used oil-impregnated.
SCOPE
1.1 This standard describes a method for measuring the density of powder metallurgy products that usually have surface-connected porosity.  
1.2 The density of impermeable PM materials, those materials that do not gain mass when immersed in water, may be determined using Test Method B311.  
1.3 The current method is applicable to green compacts, sintered parts, and green and sintered test specimens.  
1.4 With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the long-standing industry practice, the values in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    7 pages
    English language
    sale 15% off
  • Standard
    7 pages
    English language
    sale 15% off
ASTM
ASTM B610-23(Test Method)
Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction

SIGNIFICANCE AND USE
5.1 Dimensional Change When Compacting and Sintering Metal Powders:  
5.1.1 The dimensional change value obtained under specified conditions of compacting and sintering is a material characteristic inherent in the powder.  
5.1.2 The test is useful for quality control of the dimensional change of a metal powder mixture, to measure compositional and processing changes and to guide in the production of PM parts.  
5.1.3 The absolute dimensional change may be used to classify powders or differentiate one type or grade from another, to evaluate additions to a powder mixture or to measure process changes, and to guide in the design of tooling.  
5.1.4 The comparative dimensional change is mainly used as a quality control test to measure variations between a lot or shipment of metal powder and a reference powder of the same material composition.  
5.1.5 Factors known to affect size change are the base metal powder grade; type and lot; particle size distribution; level and types of additions to the base metal powder; amount and type of lubricant, green density, as well as processing conditions of the test specimen; heating rate; sintering time and temperature; sintering atmosphere; and cooling rate.  
5.2 Dimensional Change of Various PM Processing Steps:  
5.2.1 The general procedure of measuring the die or a test compact before and after a PM processing step, and calculating a percent dimensional change, is also adapted for use as an internal process evaluation test to quantify green expansion, repressing size change, heat treatment changes, or other changes in dimensions that result from a manufacturing operation.
SCOPE
1.1 This standard covers a test method that may be used to measure the sum of the changes in dimensions that occur when a metal powder is first compacted into a test specimen and then sintered.  
1.2 The dimensional change is determined by a quantitative laboratory procedure in which the arithmetic difference between the dimensions of a die cavity and the dimensions of a sintered test specimen produced from that die is calculated and expressed as a percent growth or shrinkage.  
1.3 With the exception of the values for density and the mass used to determine density, for which the use of the gram per cubic centimetre (g/cm3) and gram (g) units is the long-standing industry practice, the values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM B243-23(Terminology)
Standard Terminology of Powder Metallurgy

SCOPE
1.1 This terminology standard includes definitions that are helpful in the interpretation and application of powder metallurgy terms.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    10 pages
    English language
    sale 15% off
  • Standard
    10 pages
    English language
    sale 15% off
ASTM
ASTM B931-23(Test Method)
Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

SIGNIFICANCE AND USE
5.1 The engineering function of many PM parts may require an exterior portion of the part to have a hardened layer. Where case hardening produces a distinct transition in the microstructure, metallographic estimation of the observed case depth may be used to check the depth to which the surface has been hardened.
SCOPE
1.1 A metallographic method is described for estimating the observed case depth of ferrous powder metallurgy (PM) parts. This method may be used for all types of hardened cases where there is a discernible difference between the microstructure of the hardened surface and that of the interior of the part.  
1.2 With the exception of the values for grit size for which the U.S. standard designation is the industry standard, the values stated in SI units are to be regarded as standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off