ASTM F1071-94(2012)

Standard Specification for Expanded-Metal Bulkhead Panels

ABSTRACT
This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards. Bulkhead panels are furnished in three types as follows: type I - universal bulkhead panels for use as both a right-hand or left-hand panel, type II - right-hand bulkhead panel, and type III - left-hand bulkhead panel. Bulkhead panels are furnished in two classes as follows: class A - bulkhead panels, 2 ft; and class B - bulkhead panels, 3 ft. Expanded-metal panels shall be free from all cracks, burrs, sharp edges, and other defects. The panel manufacturer shall apply a nonhazardous corrosion-inhibiting primer coating to all panel assemblies.
SCOPE
1.1 This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards.  
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 31-May-2012
• ICS: 47.020.10 - Hulls and their structure elements
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Relations

• Replaces: ASTM F1071-94(2006) - Standard Specification for Expanded-Metal Bulkhead Panels
• Effective Date: 01-Jun-2012

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F1071 −94 (Reapproved 2012) An American National Standard
Standard Specification for
1
Expanded-Metal Bulkhead Panels
This standard is issued under the fixed designation F1071; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 3.3.1 Size 1—76 in. (195 cm) high.
3.3.2 Size 2—64 in. (165 cm) high.
1.1 This specification covers steel expanded-metal bulkhead
3.3.3 Size 3—40 in. (100 cm) high.
panels suitable for use in storerooms, shops, and as protection
against personnel hazards.
4. Ordering Information
1.2 The values stated in inch-pound units are to be regarded
4.1 Orders for expanded-metal panels under this specifica-
as the standard. The values given in parentheses are for
tion shall include this specification number, type, class, and
information only.
size.
2. Referenced Documents
5. Materials and Manufacture
2
2.1 ASTM Standards:
5.1 Materials—See Table 1.
A36/A36M Specification for Carbon Structural Steel
5.2 Manufacture:
D3951 Practice for Commercial Packaging
5.2.1 Welding shall be in accordance withAWS D1.1 or the
2.2 Other Documents:
ABS Rules for Building and Classing Steel Vessels.
3
ABS Rules for Building and Classing Steel Vessels
4 5.2.2 Panels shall be welded and fabricated as shown in
AWS D1.1 Structural Welding Code
Figs. 1-6.
5.2.3 After panels have been shipped to the contractor, the
3. Classification
panels will be assembled into bulkheads by welding or bolting
3.1 Bulkhead panels are furnished in three types as follows.
by others.
3.1.1 Type I—Universal bulkhead panels for use as either a
right-hand or left-hand panel.
6. Tolerances
3.1.2 Type II—Right-hand bulkhead panel.
1
6.1 Tolerances—6 ⁄16 in. (1.5 mm).
3.1.3 Type III—Left-hand bulkhead panel.
7. Workmanship, Finish, and Appearance
3.2 Bulkhead panels are furnished in two classes as follows.
3.2.1 Class A—Bulkhead panels, 2 ft (610 cm).
7.1 Expanded-metal panels shall be free from all cracks,
3.2.2 Class B—Bulkhead panels, 3 ft (915 cm).
burrs, sharp edges, and other defects.
3.3 Bulkhead panels Types II and III, Class A only, are
7.2 The panel manufacturer shall apply a nonhazardous
furnished in three sizes as follows.
corrosion-inhibiting primer coating to all panel assemblies.
8. Packaging and Package Marking
1
This specification is under the jurisdiction of ASTM Committee F25 on Ships
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
8.1 Expanded-metal bulkhead panels shall be individually
Outfitting and Deck Machinery.
packed for shipment and storage in accordance with Practice
Current edition approved June 1, 2012. Published October 2012. Originally
D3951.
approved in 1987. Last previous edition approved in 2006 as F1071 – 94 (2006).
DOI: 10.1520/F1071-94R12.
8.2 In addition to any special marking required by the
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contractorpurchaseorder,eachexpanded-metalpanelpackage
contact ASTM Customer Service at [e-mail].
...