ASTM B224-16(2022)
(Classification)Standard Classification of Coppers
Standard Classification of Coppers
SIGNIFICANCE AND USE
4.1 This classification lists the types of copper available from refineries or fabricators, or both, defines the common terms used, and gives the characteristics of many of the coppers available. It is useful to the neophyte looking for the appropriate copper for a particular application.
SCOPE
1.1 This is a classification of the various types of copper currently available in refinery shapes and wrought products in commercial quantities. It is not a specification for the various types of copper.
1.2 In this classification, use is made of the standard copper designations in use by the copper industry.
1.3 Although this classification includes certain UNS designations as described in Practice E527, these designations are for cross-reference only and are not requirements. Therefore, in case of conflict, this ASTM classification shall govern.
1.4 This classification does not attempt to differentiate between all compositions that could be termed either coppers or copper-base alloys, but in conformance with general usage in the trade, includes those coppers in which the copper plus specific permitted elements is specified as 99.85 % or more, silver being counted as copper except in the case of UNS C10100 and C11040 where silver is not counted as copper.
Note 1: Coppers may contain small amounts of certain elements intentionally permitted to impart specific properties, without excessively lowering electrical conductivity. The total copper plus specific permitted elements is specified as 99.85 % or more. These intentionally permitted elements normally include, but are not limited to, arsenic, cadmium, chromium, lead, magnesium, silver, sulfur, tellurium, tin, zinc, and zirconium, plus deoxidizers, up to specific levels adopted by the International Standards Organization.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: B224 −16 (Reapproved 2022)
Standard Classification of
Coppers
This standard is issued under the fixed designation B224; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* 2. Referenced Documents
1.1 This is a classification of the various types of copper 2.1 ASTM Standards:
currently available in refinery shapes and wrought products in E527 Practice for Numbering Metals and Alloys in the
commercial quantities. It is not a specification for the various Unified Numbering System (UNS)
types of copper. B846 Terminology for Copper and Copper Alloys
1.2 In this classification, use is made of the standard copper
3. Terminology
designations in use by the copper industry.
3.1 This classification covers definitions specific to this
1.3 Although this classification includes certain UNS des-
document and in conjunction with Terminology B846.
ignations as described in Practice E527, these designations are
3.2 Definitions of Terms Specific to This Standard:
forcross-referenceonlyandarenotrequirements.Therefore,in
3.2.1 sulfur-bearing copper—copper alloy containing a
case of conflict, this ASTM classification shall govern.
specified amount of sulfur (C14700).
1.4 This classification does not attempt to differentiate
3.2.2 tellurium-bearing copper—copper alloy containing a
between all compositions that could be termed either coppers
specified amount of tellurium (C14500).
or copper-base alloys, but in conformance with general usage
in the trade, includes those coppers in which the copper plus 3.2.3 wire—a solid section, including rectangular flat wire
specific permitted elements is specified as 99.85 % or more, but excluding other flat products, furnished in coils or on
spools, reels, or bucks.
silver being counted as copper except in the case of UNS
C10100 and C11040 where silver is not counted as copper.
3.2.4 zirconium-bearing copper—copper alloy containing a
specified amount of zirconium (C15000).
NOTE 1—Coppers may contain small amounts of certain elements
intentionally permitted to impart specific properties, without excessively
lowering electrical conductivity. The total copper plus specific permitted 4. Significance and Use
elements is specified as 99.85 % or more. These intentionally permitted
4.1 This classification lists the types of copper available
elements normally include, but are not limited to, arsenic, cadmium,
from refineries or fabricators, or both, defines the common
chromium, lead, magnesium, silver, sulfur, tellurium, tin, zinc, and
zirconium, plus deoxidizers, up to specific levels adopted by the Interna-
terms used, and gives the characteristics of many of the
tional Standards Organization.
coppers available. It is useful to the neophyte looking for the
1.5 This international standard was developed in accor-
appropriate copper for a particular application.
dance with internationally recognized principles on standard-
5. Basis of Classification
ization established in the Decision on Principles for the
Development of International Standards, Guides and Recom-
5.1 Table 1 lists the standard designations, and the refinery
mendations issued by the World Trade Organization Technical
shapes and fabricators’ products currently produced. The listed
Barriers to Trade (TBT) Committee.
coppers are not necessarily available in the complete range of
sizesintheformshown,norfromanyonesupplierinallforms.
This classification is under the jurisdiction of ASTM Committee B05 on
Copper and CopperAlloys and is the direct responsibility of Subcommittee B05.07
on Refined Copper. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Oct. 1, 2022. Published October 2022. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1948. Last previous edition approved in 2016 as B224 – 16. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/B0224-16R22. the ASTM website.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C7
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.