ASTM E136-24
(Test Method)Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
SIGNIFICANCE AND USE
5.1 Materials that pass this test by complying with the criteria in Section 15 are typically classified as noncombustible materials.
5.2 While actual building fire exposure conditions are not duplicated, this test method will assist in indicating those materials which do not act to aid combustion or add appreciable heat to an ambient fire.
5.3 Materials passing the test are permitted limited flaming and other indications of combustion.
SCOPE
1.1 This fire-test-response test method covers the determination under specified laboratory conditions of the combustibility of building materials. Materials passing this test are typically classified as noncombustible materials.
1.2 Limitations of this fire-test response test method are shown below.
1.2.1 This test method does not apply to laminated or coated materials.
1.2.2 This test method is not suitable or satisfactory for materials that soften, flow, melt, intumesce or otherwise separate from the measuring thermocouple.
1.2.3 This test method does not provide a measure of an intrinsic property.
1.2.4 This test method does not provide a quantitative measure of heat generation or combustibility; it simply serves as a test method with selected (end point) measures of combustibility.
1.2.5 The test method does not measure the self-heating tendencies of materials.
1.2.6 In this test method materials are not being tested in the nature and form used in building applications. The test specimen consists of a small, specified volume that is either (1) cut from a thick sheet; (2) assembled from multiple thicknesses of thin sheets; or (3) placed in a container if composed of granular powder or loose-fiber materials.
1.2.7 Results from this test method apply to the specific test apparatus and test conditions and are likely to vary when changes are made to one or more of the following: (1) the size, shape, and arrangement of the specimen; (2) the distribution of organic content; (3) the exposure temperature; (4) the air supply; (5) the location of thermocouples.
1.3 This test method includes two options, both of which use a furnace to expose test specimens of building materials to a temperature of 750 °C (1382 °F).
1.3.1 The furnace for the apparatus for Option A consists of a ceramic tube containing an electric heating coil, and two concentric vertical refractory tubes.
1.3.2 The furnace for the apparatus for Option B (Test Method E2652) consists of an enclosed refractory tube surrounded by a heating coil with a cone-shaped airflow stabilizer.
1.4 This test method references notes and footnotes that provide explanatory information. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this test method.
1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.6 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.
1.7 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barri...
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E136 − 24 An American National Standard
Standard Test Method for
Assessing Combustibility of Materials Using a Vertical Tube
1
Furnace at 750 °C
This standard is issued under the fixed designation E136; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope* organic content; (3) the exposure temperature; (4) the air
supply; (5) the location of thermocouples.
1.1 This fire-test-response test method covers the determi-
nation under specified laboratory conditions of the combusti-
1.3 This test method includes two options, both of which
bility of building materials. Materials passing this test are
use a furnace to expose test specimens of building materials to
typically classified as noncombustible materials.
a temperature of 750 °C (1382 °F).
1.3.1 The furnace for the apparatus for Option A consists of
1.2 Limitations of this fire-test response test method are
a ceramic tube containing an electric heating coil, and two
shown below.
concentric vertical refractory tubes.
1.2.1 This test method does not apply to laminated or coated
materials. 1.3.2 The furnace for the apparatus for Option B (Test
Method E2652) consists of an enclosed refractory tube sur-
1.2.2 This test method is not suitable or satisfactory for
materials that soften, flow, melt, intumesce or otherwise rounded by a heating coil with a cone-shaped airflow stabilizer.
separate from the measuring thermocouple.
1.4 This test method references notes and footnotes that
1.2.3 This test method does not provide a measure of an
provide explanatory information. These notes and footnotes,
intrinsic property.
excluding those in tables and figures, shall not be considered as
1.2.4 This test method does not provide a quantitative
requirements of this test method.
measure of heat generation or combustibility; it simply serves
1.5 The values stated in SI units are to be regarded as
as a test method with selected (end point) measures of
standard. The values given in parentheses are for information
combustibility.
only.
1.2.5 The test method does not measure the self-heating
tendencies of materials.
1.6 This standard is used to measure and describe the
1.2.6 In this test method materials are not being tested in the
response of materials, products, or assemblies to heat and
nature and form used in building applications. The test speci-
flame under controlled conditions, but does not by itself
men consists of a small, specified volume that is either (1) cut
incorporate all factors required for fire-hazard or fire-risk
from a thick sheet; (2) assembled from multiple thicknesses of
assessment of the materials, products, or assemblies under
thin sheets; or (3) placed in a container if composed of granular
actual fire conditions.
powder or loose-fiber materials.
1.7 Fire testing is inherently hazardous. Adequate safe-
1.2.7 Results from this test method apply to the specific test
guards for personnel and property shall be employed in
apparatus and test conditions and are likely to vary when
conducting these tests.
changes are made to one or more of the following: (1) the size,
shape, and arrangement of the specimen; (2) the distribution of
1.8 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro-
1 priate safety, health, and environmental practices and deter-
This test method is under the jurisdiction of ASTM Committee E05 on Fire
mine the applicability of regulatory limitations prior to use.
Standards and is the direct responsibility of Subcommittee E05.23 on Combustibil-
ity.
1.9 This international standard was developed in accor-
Current edition approved Feb. 1, 2024. Published February 2024. Originally
dance with internationally recognized principles on standard-
approved in 1958. Last previous edition approved in 2022 as E136 – 22. DOI:
10.1520/E0136-24. ization established in the Decision on Principles for the
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E136 − 24
Development of International Standards, Guides and Recom- 5. Significance and Use
mendations issued by the World Trade Organization Technica
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E136 − 22 E136 − 24 An American National Standard
Standard Test Method for
Assessing Combustibility of Materials Using a Vertical Tube
1
Furnace at 750 °C
This standard is issued under the fixed designation E136; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope*
1.1 This fire-test-response test method covers the determination under specified laboratory conditions of the combustibility of
building materials. Materials passing this test are typically classified as noncombustible materials.
1.2 Limitations of this fire-test response test method are shown below.
1.2.1 This test method does not apply to laminated or coated materials.
1.2.2 This test method is not suitable or satisfactory for materials that soften, flow, melt, intumesce or otherwise separate from the
measuring thermocouple.
1.2.3 This test method does not provide a measure of an intrinsic property.
1.2.4 This test method does not provide a quantitative measure of heat generation or combustibility; it simply serves as a test
method with selected (end point) measures of combustibility.
1.2.5 The test method does not measure the self-heating tendencies of materials.
1.2.6 In this test method materials are not being tested in the nature and form used in building applications. The test specimen
consists of a small, specified volume that is either (1) cut from a thick sheet; (2) assembled from multiple thicknesses of thin sheets;
or (3) placed in a container if composed of granular powder or loose-fiber materials.
1.2.7 Results from this test method apply to the specific test apparatus and test conditions and are likely to vary when changes
are made to one or more of the following: (1) the size, shape, and arrangement of the specimen; (2) the distribution of organic
content; (3) the exposure temperature; (4) the air supply; (5) the location of thermocouples.
1.3 This test method includes two options, both of which use a furnace to expose test specimens of building materials to a
temperature of 750 °C (1382 °F).
1.3.1 The furnace for the apparatus for Option A consists of a ceramic tube containing an electric heating coil, and two concentric
vertical refractory tubes.
1
This test method is under the jurisdiction of ASTM Committee E05 on Fire Standards and is the direct responsibility of Subcommittee E05.23 on Combustibility.
Current edition approved Oct. 1, 2022Feb. 1, 2024. Published October 2022February 2024. Originally approved in 1958. Last previous edition approved in 20192022 as
E136 – 19a.E136 – 22. DOI: 10.1520/E0136-22.10.1520/E0136-24.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E136 − 24
1.3.2 The furnace for the apparatus for Option B (Test Method E2652) consists of an enclosed refractory tube surrounded by a
heating coil with a cone-shaped airflow stabilizer.
1.4 This test method references notes and footnotes that provide explanatory information. These notes and footnotes, excluding
those in tables and figures, shall not be considered as requirements of this test method.
1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.6 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under
controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials,
products, or assemblies under actual fire conditions.
1.7 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these
tests.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of
regulatory limitations prior to use.
1.9 This international standard was developed in accordance with internationally recognized principles on standardization
established in the De
...
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E136 − 24 An American National Standard
Standard Test Method for
Assessing Combustibility of Materials Using a Vertical Tube
1
Furnace at 750 °C
This standard is issued under the fixed designation E136; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope* organic content; (3) the exposure temperature; (4) the air
supply; (5) the location of thermocouples.
1.1 This fire-test-response test method covers the determi-
nation under specified laboratory conditions of the combusti- 1.3 This test method includes two options, both of which
bility of building materials. Materials passing this test are use a furnace to expose test specimens of building materials to
typically classified as noncombustible materials. a temperature of 750 °C (1382 °F).
1.3.1 The furnace for the apparatus for Option A consists of
1.2 Limitations of this fire-test response test method are
a ceramic tube containing an electric heating coil, and two
shown below.
concentric vertical refractory tubes.
1.2.1 This test method does not apply to laminated or coated
1.3.2 The furnace for the apparatus for Option B (Test
materials.
Method E2652) consists of an enclosed refractory tube sur-
1.2.2 This test method is not suitable or satisfactory for
rounded by a heating coil with a cone-shaped airflow stabilizer.
materials that soften, flow, melt, intumesce or otherwise
separate from the measuring thermocouple. 1.4 This test method references notes and footnotes that
1.2.3 This test method does not provide a measure of an provide explanatory information. These notes and footnotes,
intrinsic property. excluding those in tables and figures, shall not be considered as
1.2.4 This test method does not provide a quantitative requirements of this test method.
measure of heat generation or combustibility; it simply serves
1.5 The values stated in SI units are to be regarded as
as a test method with selected (end point) measures of
standard. The values given in parentheses are for information
combustibility.
only.
1.2.5 The test method does not measure the self-heating
1.6 This standard is used to measure and describe the
tendencies of materials.
response of materials, products, or assemblies to heat and
1.2.6 In this test method materials are not being tested in the
flame under controlled conditions, but does not by itself
nature and form used in building applications. The test speci-
incorporate all factors required for fire-hazard or fire-risk
men consists of a small, specified volume that is either (1) cut
assessment of the materials, products, or assemblies under
from a thick sheet; (2) assembled from multiple thicknesses of
actual fire conditions.
thin sheets; or (3) placed in a container if composed of granular
powder or loose-fiber materials. 1.7 Fire testing is inherently hazardous. Adequate safe-
1.2.7 Results from this test method apply to the specific test guards for personnel and property shall be employed in
apparatus and test conditions and are likely to vary when conducting these tests.
changes are made to one or more of the following: (1) the size,
1.8 This standard does not purport to address all of the
shape, and arrangement of the specimen; (2) the distribution of
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appro-
1
priate safety, health, and environmental practices and deter-
This test method is under the jurisdiction of ASTM Committee E05 on Fire
Standards and is the direct responsibility of Subcommittee E05.23 on Combustibil-
mine the applicability of regulatory limitations prior to use.
ity.
1.9 This international standard was developed in accor-
Current edition approved Feb. 1, 2024. Published February 2024. Originally
dance with internationally recognized principles on standard-
approved in 1958. Last previous edition approved in 2022 as E136 – 22. DOI:
10.1520/E0136-24. ization established in the Decision on Principles for the
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
E136 − 24
Development of International Standards, Guides and Recom- 5. Significance and Use
mendations issued by the World Trade Organization Technical
5.1 Materials that pass this test by complying with the
Barriers to Trade (TBT) Committee.
criteria in Section 15 are typically classified
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.