ASTM D1007-00

Standard Specification for <i>sec</i>-Butyl Alcohol

SCOPE
1.1 This specification covers sec -butyl alcohol for use in paint, varnish, lacquer, and related products.  
1.2 For hazard information and guidance, see the supplier's Material Safety Data Sheet.

General Information

• Status: Historical
• Publication Date: 09-Jan-2000
• ICS: 71.080.60 - Alcohols. Ethers
• ICS: 87.060.30 - Solvents
• Technical Committee: D01 - Paint and Related Coatings, Materials, and Applications
• Drafting Committee: D01.35 - Solvents, Plasticizers, and Chemical Intermediates

Relations

• Replaced By: ASTM D1007-05 - Standard Specification for <i>sec</i>-Butyl Alcohol
• Effective Date: 15-May-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 1007 – 00
Standard Specification for
,
1 2
sec-Butyl Alcohol
This standard is issued under the fixed designation D 1007; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope* 3. Properties
1.1 This specification covers sec-butyl alcohol for use in 3.1 sec-Butyl alcohol shall conform to the following re-
paint, varnish, lacquer, and related products. quirements:
1.2 For hazard information and guidance, see the supplier’s
Apparent specific gravity:
20/20°C 0.807 to 0.809
Material Safety Data Sheet.
25/25°C 0.804 to 0.806
Color, Pt-Co scale, max 10
2. Referenced Documents
Distillation range, 760 mmHg, °C as:
Initial boiling point, min 98.0
2.1 ASTM Standards:
Dry point, max 101.0
D 268 Guide for Sampling and Testing Volatile Solvents
Nonvolatile matter, max, mg/100 mL 5
and Chemical Intermediates for Use in Paint and Related
Water, max, weight % 0.5
A
Acidity, as acetic acid, max, weight % 0.002
Coatings and Materials
__________
D 1078 Test Method for Distillation Range of Volatile
A
Equivalent to 0.019 mg of KOH per gram of sample.
Organic Liquids
D 1209 Test Method for Color of Clear Liquids (Platinum-
4. Sampling
Cobalt Scale)
4.1 The material shall be sampled in accordance with
D 1353 Test Method for Nonvolatile Matter in Volatile
Practice E 300.
Solvents for Use in Paint, Varnish, Lacquer, and Related
Products
5. Test Methods
D 1364 Test Method for Water in Volatile Solvents (Karl
5.1 The properties enumerated in this specification shall be
Fischer Reagent Titration Method)
determined in accordance with the following ASTM methods:
D 1613 Test Method for Acidity in Volatile Solvents and
5.1.1 Apparent Specific Gravity—Determine the apparent
Chemical Intermediates Used in Paint, Varnish, Lacquer,
specific gravity at 20 or 25°C by a convenient method that is
and Related Products
accurate to the third decimal place. See Guide D 268 or Test
D 4052 Test Method for Density and Relative Density of
Method D 4052.
Liquids by Digital Density Meter
5.1.2 Color—Test Method D 1209.
E1 Specification for ASTM Thermometers
5.1.3 Distillation Range—Test Method D 1078 using an
E 300 Practice for Sampling Industrial Chemicals
ASTM Solvents DistillationThermometer 40C, having a range
2.2 U.S. Federal Specification:
from 72 to 126°C and conforming to the requirements in
PPP-C-2020 Chemicals, Liquid, Dry, and Paste: Packaging
SpecificationE1.
of
5.1.4 Nonvolatile Matter—Test Method D 1353.
5.1.5 Water—Test Methods D 1364 .
5.1.6 Acidity—Test Method D 1613.
Th
...