iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM F1074-87(2002)

(Specification)

Standard Specification for Cleats, Welded Horn Type

Standard Specification for Cleats, Welded Horn Type

SCOPE
1.1 This specification covers hollow cleats and pads for marine use.
1.2 The cleats shall be used where securing of boat handling lines are required onboard commercial and navy boats and crafts.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

Status
Historical
Publication Date
27-Aug-1997
ICS
47.020.50 - Deck equipment and installations
Technical Committee
F25 - Ships and Marine Technology
Drafting Committee
F25.03 - Outfitting and Deck Machinery
Current Stage
Ref Project

Relations

Replaces
ASTM F1074-87(1994)e1 - Standard Specification for Cleats, Welded Horn Type
Effective Date
28-Aug-1997
Replaced By
ASTM F1074-87(2007) - Standard Specification for Cleats, Welded Horn Type
Effective Date
01-Dec-2007

Buy Standard

ASTM F1074-87(2002) - Standard Specification for Cleats, Welded Horn TypeASTM F1074-87(2002) - Standard Specification for Cleats, Welded Horn Type
PreviousNext
Technical specification
ASTM F1074-87(2002) - Standard Specification for Cleats, Welded Horn Type
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 1074 – 87 (Reapproved 2002)
Standard Specification for
Cleats, Welded Horn Type
This standard is issued under the fixed designation F 1074; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 4. Materials and Manufacture
1.1 This specification covers hollow cleats and pads for 4.1 Material:
marine use. 4.1.1 The horn cleats shall be of galvanized steel, grade
1.2 The cleats shall be used where securing of boat handling 1023W, in accordance with Practice A 385.
lines are required onboard commercial and navy boats and 4.1.2 The base plate shall be of steel, (carbon 0.35 maxi-
crafts. mum), in accordance with Specification A 36/A 36M.
1.3 The values stated in inch-pound units are to be regarded 4.1.3 All chafing surfaces shall have a 125µ finish.
as the standard. The values given in parentheses are for 4.2 Manufacture—The cleats’ horns shall be of cast steel,
information only. round in shape, and free of burrs or sharp edges. The horns
shall be welded to a base plate as shown in Fig. 1 (seeTable 1).
2. Referenced Documents
The weld is to be ground smooth to prevent chafing of ropes.
2.1 ASTM Standards: The base plate shall be oval shaped with smooth rounded
A 36/A 36M Specification for Carbon Structural Steel
edges. The dimensions shall be in accordance with Table 1.
A 370 Test Methods and Definitions for MechanicalTesting
5. Packaging
of Steel Products
A 385 Practice for Providing High-Quality Zinc Coatings 5.1 The packing shall afford protection against deterioration
(Hot-Dip) andphysicaldamageduringshipmentfromthemanufacturerto
the using activity for immediate use.
3. Ordering Information
6. Product Marking
3.1 Orders for material under this specification shall include
the following: 6.1 Containers shall be stenciled with the ASTM standard
3.1.1 Title, number, and date of this specification, designation, in black paint with approximately 1 in. (25.4 mm)
3.1.2 Quantity, high letters and numbers with the following information:
3.1.3 Size of cleats, and 6.1.1 Address,
3.1.4 Packaging, packing, or marking requirements. 6.1.2 purchase order number, and
6.1.3 Manufacturer’s name.
This specification is under the jurisdiction of ASTM Committee F25 on Ships 7. Keywords
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
7.1 base plates; boat handling lines; cleats; hollow cleats;
Outfitting.
horn cleats; marine; marine cleats; ship; welded cleats
Current edition approved Aug. 28, 1987. Published October 1987.
Annual Book of ASTM Standards, Vol 01.04.
Annual Book of ASTM Standards, Vol 01.03.
Annual Book of ASTM Standards, Vol 01.06.
Copyright © A
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM F1322-15(2024)(Guide)
Standard Guide for Selection of Shipboard Incinerators

ABSTRACT
This guide covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs. A number of factors will govern the selection of the size and type of shipboard incinerator and full consideration must be given to each. The installed operating location of the unit is of equal importance to ensure low-cost operating, ease of charging, ease of cleaning, and so forth. The basis for satisfactory incinerator operation is the proper analysis of the waste to be destroyed and the selection of proper equipment to best destroy that particular waste. Shipboard wastes are classified according to types: Type 0; Type 1; Type 2; Type 3; Type 4; Type 5; and Type 6.
SCOPE
1.1 This guide covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs.  
1.2 This guide is a companion document to Specification F1323.  
1.3 This guide does not apply to incinerator systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, and so forth.  
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1198-92(2023)(Guide)
Standard Guide for Shipboard Fire Detection Systems

SIGNIFICANCE AND USE
4.1 The purpose of a shipboard fire detection system is to provide warning so as to reduce the life safety threat from fire and to minimize the fire threat to the operation of the ship. Given that few ships are identical either in size or layout, it follows that the fire detection system will have to be custom designed accordingly. A well-designed system provides a reasonable substitute to having crew members on constant fire watch in every protected space where a fire might occur.  
4.2 The basic function of the fire detection system is to automatically and reliably indicate a fire condition as quickly as is practical and to alert responsible individuals of a fire's existence and location. This system design and application guide addresses the individual steps in the layout of the system and provides an overview of the information needed to design a system.  
4.3 The U.S. Coast Guard and the International Convention for the Safety of Life at Sea (SOLAS) regulations have been stated as requirements within this guide. Additional guidelines to assure complete and effective systems or to incorporate good industry practices are stated as recommendations.
SCOPE
1.1 This guide covers the selection, installation, maintenance, and testing of shipboard fire detection systems other than sprinkler systems.  
1.2 This guide is intended for use by all persons planning, designing, installing, or using fire alarm systems onboard vessels. As it includes regulatory requirements, this guide addresses those vessels subject to regulations and ship classification rules. However, the principles stated herein are also suitable for unregulated commercial vessels, pleasure craft, military vessels, and similar vessels that are not required to meet regulations for fire detection and alarm systems.  
1.3 Limitations—This guide does not constitute regulations or ship classification rules, which must be consulted when applicable.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    10 pages
    English language
    sale 15% off
ASTM
ASTM F1019M-00(2023)(Specification)
Standard Specification for Steel Deck Gear Stowage Box (Metric)

ABSTRACT
This specification covers the material and design requirements for the manufacture of two types of steel deck gear stowage boxes. This specification, though, does not include life preserver or pyrotechnic stowages. The materials used in the construction of this box and its packaging shall be free of asbestos and cadmium, and the entire finished assembly shall be free of weld spatter, slag, splinters, sharp edges, projections, and other defects that may be hazardous to personnel.
SCOPE
1.1 This specification covers the design, material, and manufacture of steel deck gear stowage boxes.  
1.2 This specification shall not be used for life preserver or pyrotechnic stowage.  
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are included for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
ASTM
ASTM F1074-87(2023)(Specification)
Standard Specification for Cleats, Welded Horn Type

ABSTRACT
This specification covers hollow welded horn type cleats and pads for marine use. The cleats shall be used where securing of boat handling lines are required onboard commercial and navy boats and crafts. The horn cleats shall be of galvanized steel, grade 1023W; the base plate shall be of the prescribed steel composition; and all chafing surfaces shall have the specified finish. The cleats’ horns shall be of cast steel, round in shape, and free of burrs or sharp edges. The requirements for welding of horns to a base plate are illustrated. The dimensional requirements for cleat, rope circumference, and roper diameter are specified. Requirements for packaging and product marking are given as well.
SCOPE
1.1 This specification covers hollow cleats and pads for marine use.  
1.2 The cleats shall be used where securing of boat handling lines are required onboard commercial and navy boats and crafts.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F2935-23(Specification)
Standard Specification for Chocks, Panama, Mooring Cast Steel

ABSTRACT
This specification covers the principal dimensions and materials of chocks installed in ships to comply with the regulations of the Panama Canal. It indicates the workmanship, finish, and appearance of deck mounted chocks, along with the configuration of bulwark mounted chocks. The dimension requirements and classification of chocks are included as well.
SCOPE
1.1 This specification covers the principal dimensions and materials of chocks installed in ships to comply with the regulations of the Panama Canal.  
1.2 Chocks can be used with either wire rope or fiber and synthetic ropes.  
1.3 Chocks are for mounting directly on a deck, seat (foundation) or for mounting in a bulwark.  
1.4 To meet Panama Canal Company regulations the radius of contact surfaces of lines must be 180 mm.  
1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM F1994-99(2023)(Test Method)
Standard Test Method for Shipboard Fixed Foam Firefighting Systems

SIGNIFICANCE AND USE
4.1 This test method is applicable to fixed foam firefighting systems, including foam generation equipment, foam distribution system piping and valves, sprinkler arrangement and operation, hose reel unit operation, and system controls, as those components are included in the system for a particular application.  
4.1.1 Foam systems for machinery spaces are tested using those portions of this test method which apply to the installed components. Suitable adaptation of this test method is made for use with systems which do not include all hardware components described herein.  
4.1.2 Deck foam systems are tested in accordance with the manufacturer’s design criteria.  
4.2 This test method demonstrates: satisfactory installation of an entire fixed foam/sprinkling system and its associated controls; and effective operation of portions of the foam distribution system and foam maker sprinkling nozzles for selected zones.  
4.2.1 This test method verifies application rates and areas of coverage for each type of discharge device of the fixed foam firefighting system.  
4.2.2 The satisfactory operation of the system in the selected zones is a measure of overall system capacity and anticipated operation for emergency use. The test, however, may not be representative of all emergency operating conditions that may vary with changes in the number of zones that are activated simultaneously, the material condition of the distribution and sprinkling components as they are maintained over time, and restoration of the system following its use for testing or actual emergencies.  
4.3 Test procedures shall be prepared for the conduct of tests of foam firefighting systems in specific vessels. Those procedures shall be tailored to the system design for the system as installed and operated in each vessel.  
4.3.1 Tests accomplished in accordance with approved test procedures may be sufficient to demonstrate that the vessel meets the regulatory and classification requirements for the...
SCOPE
1.1 This test method covers shipboard, fixed (installed) foam/sprinkling firefighting systems.  
1.2 Satisfactory completion of these tests indicates functional performance of the fixed foam firefighting system and may be used to demonstrate the system installation’s compliance with the design characteristics of the system.  
1.3 Tests made in conformity with this test method are intended to demonstrate the installation and operation of an installed, fixed foam firefighting system. As it includes regulatory requirements, this standard addresses those vessels subject to regulations and ship classification rules. However, the methods stated herein are suitable for unregulated commercial vessels, pleasure craft, military vessels, and similar vessels that are not required to meet regulations for firefighting systems.  
1.4 Limitations:  
1.4.1 International requirements, national regulations, and ship classification rules must be consulted. The following regulatory requirements and classification society rules were considered in the preparation of this test method:
1.4.1.1 International Convention for the Safety of Life at Sea (SOLAS), 1974 SOLAS Convention, 1978 SOLAS Protocol, and the 1981 and 1983 SOLAS Amendments, II-2/8, “Fixed low-expansion foam extinguishing systems in machinery spaces,”
1.4.1.2 U.S. Government regulations included in 46 CFR 76, 46 CFR 95, and 46 CFR 108 as those regulations are written and enforced by the United States Cost Guard, and
1.4.1.3 The American Bureau of Shipping (ABS) Rules for Building and Classing Steel Vessels. However, the owner will designate the specific classification society which is to be used to classify a particular vessel.  
1.4.2 The requirements, regulations, and rules for a specific design must be selected by the owner based on the planned operating profile for the vessel.  
1.4.3 This test method reflects international requirements, U.S. Government regulations...

  • Standard
    10 pages
    English language
    sale 15% off
ASTM
ASTM F2936-23(Specification)
Standard Specification for Chocks, Ship Mooring, Cast Steel

ABSTRACT
This specification covers the principal dimensions and materials of closed chocks for installation on ships used for mooring. It specifies the classification of chocks, their dimension requirements, and strength requirements. It also demonstrates the proper horizontal and vertical loading for Type A and Type B chocks.
SCOPE
1.1 This specification covers the principal dimensions and materials of closed chocks for installation on ships used for mooring.  
1.2 Chocks can be used with either wire rope or fiber and synthetic ropes.  
1.3 Chocks are for mounting directly on a deck, seat (foundation), or for mounting in a bulwark.  
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    6 pages
    English language
    sale 15% off
  • Technical specification
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1322-15(2024)(Guide)
Standard Guide for Selection of Shipboard Incinerators

ABSTRACT
This guide covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs. A number of factors will govern the selection of the size and type of shipboard incinerator and full consideration must be given to each. The installed operating location of the unit is of equal importance to ensure low-cost operating, ease of charging, ease of cleaning, and so forth. The basis for satisfactory incinerator operation is the proper analysis of the waste to be destroyed and the selection of proper equipment to best destroy that particular waste. Shipboard wastes are classified according to types: Type 0; Type 1; Type 2; Type 3; Type 4; Type 5; and Type 6.
SCOPE
1.1 This guide covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs.  
1.2 This guide is a companion document to Specification F1323.  
1.3 This guide does not apply to incinerator systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, and so forth.  
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
ASTM
ASTM F1198-92(2023)(Guide)
Standard Guide for Shipboard Fire Detection Systems

SIGNIFICANCE AND USE
4.1 The purpose of a shipboard fire detection system is to provide warning so as to reduce the life safety threat from fire and to minimize the fire threat to the operation of the ship. Given that few ships are identical either in size or layout, it follows that the fire detection system will have to be custom designed accordingly. A well-designed system provides a reasonable substitute to having crew members on constant fire watch in every protected space where a fire might occur.  
4.2 The basic function of the fire detection system is to automatically and reliably indicate a fire condition as quickly as is practical and to alert responsible individuals of a fire's existence and location. This system design and application guide addresses the individual steps in the layout of the system and provides an overview of the information needed to design a system.  
4.3 The U.S. Coast Guard and the International Convention for the Safety of Life at Sea (SOLAS) regulations have been stated as requirements within this guide. Additional guidelines to assure complete and effective systems or to incorporate good industry practices are stated as recommendations.
SCOPE
1.1 This guide covers the selection, installation, maintenance, and testing of shipboard fire detection systems other than sprinkler systems.  
1.2 This guide is intended for use by all persons planning, designing, installing, or using fire alarm systems onboard vessels. As it includes regulatory requirements, this guide addresses those vessels subject to regulations and ship classification rules. However, the principles stated herein are also suitable for unregulated commercial vessels, pleasure craft, military vessels, and similar vessels that are not required to meet regulations for fire detection and alarm systems.  
1.3 Limitations—This guide does not constitute regulations or ship classification rules, which must be consulted when applicable.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    10 pages
    English language
    sale 15% off
ASTM
ASTM F1074-87(2023)(Specification)
Standard Specification for Cleats, Welded Horn Type

ABSTRACT
This specification covers hollow welded horn type cleats and pads for marine use. The cleats shall be used where securing of boat handling lines are required onboard commercial and navy boats and crafts. The horn cleats shall be of galvanized steel, grade 1023W; the base plate shall be of the prescribed steel composition; and all chafing surfaces shall have the specified finish. The cleats’ horns shall be of cast steel, round in shape, and free of burrs or sharp edges. The requirements for welding of horns to a base plate are illustrated. The dimensional requirements for cleat, rope circumference, and roper diameter are specified. Requirements for packaging and product marking are given as well.
SCOPE
1.1 This specification covers hollow cleats and pads for marine use.  
1.2 The cleats shall be used where securing of boat handling lines are required onboard commercial and navy boats and crafts.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off