ASTM F1071-94(1999)

Standard Specification for Expanded-Metal Bulkhead Panels

SCOPE
1.1 This specification covers steel expanded-metal bulkhead panels suitable for use in storerooms, shops, and as protection against personnel hazards.  
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

• Status: Historical
• Publication Date: 31-Dec-1998
• ICS: 47.020.10 - Hulls and their structure elements
• Technical Committee: F25 - Ships and Marine Technology
• Drafting Committee: F25.03 - Outfitting and Deck Machinery

Relations

• Replaced By: ASTM F1071-94(2006) - Standard Specification for Expanded-Metal Bulkhead Panels
• Effective Date: 01-May-2006

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: F 1071 – 94 (Reapproved 1999)
Standard Specification for
Expanded-Metal Bulkhead Panels
This standard is issued under the fixed designation F 1071; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope 3.3.2 Size 2—64 in. (165 cm) high.
3.3.3 Size 3—40 in. (100 cm) high.
1.1 This specification covers steel expanded-metal bulkhead
panels suitable for use in storerooms, shops, and as protection
4. Ordering Information
against personnel hazards.
4.1 Orders for expanded-metal panels under this specifica-
1.2 The values stated in inch-pound units are to be regarded
tion shall include this specification number, type, class, and
as the standard. The values given in parentheses are for
size.
information only.
5. Materials and Manufacture
2. Referenced Documents
5.1 Materials—See Table 1.
2.1 ASTM Standards:
2 5.2 Manufacture:
A 36/A 36M Specification for Carbon Structural Steel
3 5.2.1 Welding shall be in accordance withAWS D1.1 or the
D 3951 Practice for Commercial Packaging
ABS Rules for Building and Classing Steel Vessels.
2.2 Other Documents:
4 5.2.2 Panels shall be welded and fabricated as shown in
ABS Rules for Building and Classing Steel Vessels
Figs. 1-6.
AWS D1.1 Structural Welding Code
5.2.3 After panels have been shipped to the contractor, the
3. Classification panels will be assembled into bulkheads by welding or bolting
by others.
3.1 Bulkhead panels are furnished in three types as follows.
3.1.1 Type I—Universal bulkhead panels for use as either a
6. Tolerances
right-hand or left-hand panel.
6.1 Tolerances—6 ⁄16 in. (1.5 mm).
3.1.2 Type II—Right-hand bulkhead panel.
3.1.3 Type III—Left-hand bulkhead panel.
7. Workmanship, Finish, and Appearance
3.2 Bulkhead panels are furnished in two classes as follows.
7.1 Expanded-metal panels shall be free from all cracks,
3.2.1 Class A—Bulkhead panels, 2 ft (610 cm).
burrs, sharp edges, and other defects.
3.2.2 Class B—Bulkhead panels, 3 ft (915 cm).
7.2 The panel manufacturer shall apply a nonhazardous
3.3 Bulkhead panels Types II and III, Class A only, are
corrosion-inhibiting primer coating to all panel assemblies.
furnished in three sizes as follows.
3.3.1 Size 1—76 in. (195 cm) high.
8. Packaging and Package Marking
8.1 Expanded-metal bulkhead panels shall be individually
packed for shipment and storage in accordance with Practice
This specification is under the jurisdiction ofASTM Committee F-25 on Ships
and Marine Technology and is the direct responsibility of Subcommittee F25.03 on
D 3951.
Outfitting.
8.2 In addition to any special marking required by the
Current edition approved Feb. 15, 1994. Published April 1994. Originally
contractorpurchaseorder,eachexpanded-metalpan
...