ASTM C114-04
(Test Method)Standard Test Methods for Chemical Analysis of Hydraulic Cement
Standard Test Methods for Chemical Analysis of Hydraulic Cement
SCOPE
1.1 These test methods cover the chemical analyses of hydraulic cements. Any test methods of demonstrated acceptable precision and bias may be used for analysis of hydraulic cements, including analyses for referee and certification purposes, as explained in Section . Specific chemical test methods are provided for ease of reference for those desiring to use them. They are grouped as Reference Test Methods and Alternative Test Methods. The reference test methods are long accepted wet chemical test methods which provide a reasonably well-integrated basic scheme of analysis for hydraulic cements. The alternative test methods generally provide individual determination of specific components and may be used alone or as alternates and determinations within the basic scheme at the option of the analyst and as indicated in the individual method.
1.2 Contents: SectionSubject2Referenced Documents3Number of Determinations and Permissible Variations3.1Referee Analyses3.2Optional Analyses3.3Performance Requirements for Rapid Test Methods3.4Precision and Bias4General4.1Interferences and Limitations4.2Apparatus and Materials4.3Reagents4.4Sample Preparation4.5General Procedures4.6Recommended Order for Reporting Analyses Reference Test Methods5Insoluble Residue6Silicon Dioxide6.2Cements with Insoluble Residue Less Than 1 %6.3Cements with Insoluble Residue Greater Than 1 %7Ammonium Hydroxide Group8Ferric Oxide9Phosphorus Pentoxide10Titanium Dioxide11Zinc Oxide12Aluminum Oxide13Calcium Oxide14Magnesium Oxide15Sulfur15.1Sulfur Trioxide15.2Sulfide16Loss On Ignition16.1Portland Cement16.2Portland Blast-Furnace Slag Cement and Slag Cement17Sodium and Potassium Oxides17.1Total Alkalis17.2Water-Soluble Alkalis18Manganic Oxide19Chloride20Chloroform-Soluble Organic Substances Alternative Test Methods21Calcium Oxide22Magnesium Oxide23Loss on Ignition23.1Portland Blast-Furnace Slag Cement and Slag Cement24Titanium Dioxide25Phosphorus Pentoxide26Manganic Oxide27Free Calcium OxideAppendices TitleAppendix X1Example of Determination of Equivalence Pointfor the Chloride DeterminationAppendix X2CO2 Determinations in Hydraulic Cements
1.3 The values stated in SI units are to be regarded as the standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See 6.3.2.1 and Note 43 for specific caution statements.
General Information
Relations
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C 114 – 04
Standard Test Methods for
1
Chemical Analysis of Hydraulic Cement
This standard is issued under the fixed designation C 114; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope
15 Sulfur
15.1 Sulfur Trioxide
1.1 These test methods cover the chemical analyses of
15.2 Sulfide
hydraulic cements. Any test methods of demonstrated accept-
16 Loss On Ignition
16.1 Portland Cement
able precision and bias may be used for analysis of hydraulic
16.2 Portland Blast-Furnace Slag Cement and Slag Cement
cements, including analyses for referee and certification pur-
17 Sodium and Potassium Oxides
poses, as explained in Section 3. Specific chemical test
17.1 Total Alkalis
17.2 Water-Soluble Alkalis
methods are provided for ease of reference for those desiring to
18 Manganic Oxide
use them. They are grouped as Reference Test Methods and
19 Chloride
Alternative Test Methods. The reference test methods are long 20 Chloroform-Soluble Organic Substances
Alternative Test Methods
accepted wet chemical test methods which provide a reason-
21 Calcium Oxide
ably well-integrated basic scheme of analysis for hydraulic
22 Magnesium Oxide
cements. The alternative test methods generally provide indi- 23 Loss on Ignition
23.1 Portland Blast-Furnace Slag Cement and Slag Cement
vidual determination of specific components and may be used
24 Titanium Dioxide
alone or as alternates and determinations within the basic
25 Phosphorus Pentoxide
scheme at the option of the analyst and as indicated in the 26 Manganic Oxide
27 Free Calcium Oxide
individual method.
Appendices Title
1.2 Contents:
Appendix X1 Example of Determination of Equivalence Point
for the Chloride Determination
Appendix X2 CO Determinations in Hydraulic Cements
2
Section Subject
2 Referenced Documents
3 Number of Determinations and Permissible Variations
1.3 The values stated in SI units are to be regarded as the
3.1 Referee Analyses
standard.
3.2 Optional Analyses
3.3 Performance Requirements for Rapid Test Methods 1.4 This standard does not purport to address all of the
3.4 Precision and Bias
safety concerns, if any, associated with its use. It is the
4 General
responsibility of the user of this standard to establish appro-
4.1 Interferences and Limitations
4.2 Apparatus and Materials priate safety and health practices and determine the applica-
4.3 Reagents
bility of regulatory limitations prior to use. See 6.3.2.1 and
4.4 Sample Preparation
Note 43 for specific caution statements.
4.5 General Procedures
4.6 Recommended Order for Reporting Analyses
Reference Test Methods 2. Referenced Documents
5 Insoluble Residue
2
2.1 ASTM Standards:
6 Silicon Dioxide
6.2 Cements with Insoluble Residue Less Than 1 % C 25 Test Methods for Chemical Analysis of Limestone,
6.3 Cements with Insoluble Residue Greater Than 1 %
Quicklime, and Hydrated Lime
7 Ammonium Hydroxide Group
C 183 Practice for Sampling and the Amount of Testing of
8 Ferric Oxide
9 Phosphorus Pentoxide Hydraulic Cement
10 Titanium Dioxide
C 595 Specification for Blended Hydraulic Cements
11 Zinc Oxide
D 1193 Specification for Reagent Water
12 Aluminum Oxide
13 Calcium Oxide E 29 Practice for Using Significant Digits in Test Data to
14 Magnesium Oxide
Determine Conformance with Specifications
1
These test methods are under the jurisdiction of ASTM Committee C01 on
2
Cement and are the direct responsibility of Subcommittee C01.23 on Compositional For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Analysis. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved Jan. 1, 2004. Published March 2004. Originally Standards volume information, refer to the standard’s Document Summary page on
approved in 1934. Last previous edition approved in 2003 as C 114–03. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
C 114–04
A
TABLE 1 Maximum Permissible Variations in Results
E 275 Practice for Describing and Measuring Performance
of Ultraviolet, Visible, and Near Infrared Spectrophotom- (Column 3)
(Column 2) Maximum
eters
Maximum Difference of the
(Column 1)
E 350 Test Methods for Chemical Analysis of Carbon Steel,
Difference Average of
Component
Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Between Duplicates from
B
Duplicates SRM Certificate
Wrought Iron
C,D,B
Values
E 617 Specification for Laboratory Weights and Precision
SiO (silicon dioxide) 0.16 60.2
2
Mass Standards
Al O (aluminum oxide) 0
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.