ASTM B167-05a

Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube

SCOPE
1.1 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and nickel-chromium-cobalt-molybdenum alloy (UNS N06617) in cold-worked annealed, hot-worked annealed, and hot-finished seamless pipe and tube intended for general corrosion resistant and heat resistant applications.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
The following safety hazards caveat pertains only to the test methods portion, Section 12, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 31-Oct-2005
• ICS: 77.150.40 - Nickel and chromium products
• Technical Committee: B02 - Nonferrous Metals and Alloys
• Drafting Committee: B02.07 - Refined Nickel and Cobalt and Their Alloys

Relations

• Replaces: ASTM B167-05 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
• Effective Date: 01-Nov-2005
• Replaced By: ASTM B167-06 - Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, and N06045)* and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) Seamless Pipe and Tube
• Effective Date: 01-Dec-2006
• Referred By: ASTM B366/B366M-23 - Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
• Effective Date: 01-Nov-2005
• Referred By: ASTM B924-02(2022) - Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
• Effective Date: 01-Nov-2005
• Referred By: ASTM E1137/E1137M-08(2020) - Standard Specification for Industrial Platinum Resistance Thermometers
• Effective Date: 01-Nov-2005
• Referred By: ASTM E2181/E2181M-19 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
• Effective Date: 01-Nov-2005
• Referred By: ASTM E585/E585M-23 - Standard Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
• Effective Date: 01-Nov-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B 167 – 05a
Standard Specification for
Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603,
N06690, N06693, N06025, and N06045)* and Nickel-
Chromium-Cobalt-Molybdenum Alloy (UNS N06617)
1
Seamless Pipe and Tube
This standard is issued under the fixed designation B 167; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* B 829 Specification for General Requirements for Nickel
2 and Nickel Alloys Seamless Pipe and Tube
1.1 This specification covers nickel-chromium-iron alloys
B 880 Specification for General Requirements for Chemical
(UNS N06600, N06601, N06603, N06690, N06693, N06025,
Check Analysis Limits for Nickel, Nickel Alloys and
and N06045)* and nickel-chromium-cobalt-molybdenum alloy
Cobalt Alloys
(UNS N06617) in cold-worked annealed, hot-worked an-
E8 Test Methods for Tension Testing of Metallic Materials
nealed, and hot-finished seamless pipe and tube intended for
E29 Practice for Using Significant Digits in Test Data to
general corrosion resistant and heat resistant applications.
Determine Conformance with Specifications
1.2 The values stated in inch-pound units are to be regarded
E38 Methods for Chemical Analysis of Nickel-Chromium
as the standard. The values given in parentheses are for
4
and Nickel-Chromium-Iron Alloys
information only.
E 1473 Test Methods for Chemical Analysis of Nickel,
1.3 The following safety hazards caveat pertains only to the
Cobalt, and High-Temperature Alloys
test methods portion, Section 12, of this specification: This
5
2.2 Federal Standards:
standard does not purport to address all of the safety concerns,
Fed. Std. No. 102 Preservation, Packaging and Packing
if any, associated with its use. It is the responsibility of the user
Levels
of this standard to become familiar with all hazards including
Fed. Std. No. 123 Marking for Shipment (Civil Agencies)
those identified in the appropriate Material Safety Data Sheet
Fed. Std. No. 182 Continuous Identification Marking of
(MSDS) for this product/material as provided by the manufac-
Nickel and Nickel-Base Alloys
turer, to establish appropriate safety and health practices, and
5
2.3 Military Standard:
determine the applicability of regulatory limitations prior to
MIL-STD-129 Marking for Shipment and Storage
use.
3. Terminology
2. Referenced Documents
3
3.1 Definitions of Terms Specific to This Standard:
2.1 ASTM Standards:
3.1.1 average diameter, n—the average of the maximum
and minimum outside diameters, as determined at any one
1
This specification is under the jurisdiction of ASTM Committee B02 on cross section of the pipe or tube.
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee
3.1.2 pipe, n—tube conforming to the particular dimensions
B02.07 on Refined Nickel and Cobalt and Their Alloys.
commercially known as pipe sizes. See Table X2.1.
Current edition approved Nov. 1, 2005. Published December 2005. Originally
3.1.3 seamless pipe or tube, n—a pipe or tube produced
approved in 1941. Last previous edition approved in 2005 as B 167 – 05.
* New designation established in accordance with Practice E 527 and SAE
with a continuous periphery in all stages of the operations.
J 1086, Practice for Numbering Metals and Alloys (UNS).
2
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
cation SB-167 in Section II of that Code.
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
4
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Withdrawn.
5
Standards volume information, refer to the standard’s Document Summary page on Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
the ASTM website. Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B 167 – 05a
3.1.4 tube, n—a hollow product of round or any other cross 5.2 If a product (check) analysis is performed by the
section having a continuous periphery. purchaser, the material shall conform to the product (check)
analysis variations in Specification B 880.
4. Ordering Information
6. Mechanical Properties and Other Requirements
4.1 It is the responsibility of the purchaser to specify all
requirements that are necessary for the safe and satisfactory
6.1 Tensile Test—The material shall conform to the tensile
performance of material
...