ASTM F2941-21

Standard Practice for Air Soft Player Safety Briefing

SIGNIFICANCE AND USE
4.1 Specific safety rules and procedures are important in order to minimize the risk of injury to persons in the general area of air soft guns.
SCOPE
1.1 This practice is intended to satisfy the demand for basic safety information, which should be understood by each air soft game participant prior to the start of the player’s first game on the day of play.  
1.2 The information specifies rules of personal conduct, which might affect the safety of persons who are in close proximity to an air soft gun.  
1.3 The information includes procedures to be followed by every person who is in, or near, an area where air soft games are being played or air soft ammunition is being shot, and to the use of safety equipment related to air soft game or air soft target shooting activities. These procedures are to be followed any time an air soft gun is being handled.  
1.4 This standard is intended to be a useful tool for air soft game organizers, but it is not intended to eliminate the need for proper game supervision, conforming to Practice F2940.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 30-Nov-2021
• ICS: 97.220.40 - Outdoor and water sports equipment
• Technical Committee: F08 - Sports Equipment, Playing Surfaces, and Facilities
• Drafting Committee: F08.27 - Airsoft

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: F2941 −21 An American National Standard
Standard Practice for
1
Air Soft Player Safety Briefing
This standard is issued under the fixed designation F2941; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This practice is intended to provide air soft game organizers with safety information, which can be
given to each game participant prior to the participant’s first game of the day. The intent is to revise
this practice whenever substantive information becomes available which justifies revising existing
requirements or adding new requirements.
1. Scope F2679 Specification for 6 mm Projectiles Used with Airsoft
Guns
1.1 This practice is intended to satisfy the demand for basic
F2748 Specification for Airsoft Guns
safety information, which should be understood by each air
F2879 Specification for Eye Protective Devices for Airsoft
soft game participant prior to the start of the player’s first game
Sports
on the day of play.
F2940 Practice for Air Soft Field Operation
1.2 The information specifies rules of personal conduct,
3
2.2 ANSI Standards:
which might affect the safety of persons who are in close
ANSI Z87.1 American National Standard for Occupational
proximity to an air soft gun.
and Educational Personal Eye and Face Protection De-
1.3 The information includes procedures to be followed by
vices
every person who is in, or near, an area where air soft games
are being played or air soft ammunition is being shot, and to 3. Terminology
the use of safety equipment related to air soft game or air soft
3.1 Definitions of Terms Specific to This Standard:
target shooting activities. These procedures are to be followed
3.1.1 air soft projectile, n—projectilecomplyingwithSpeci-
any time an air soft gun is being handled.
fication F2679, which is fired from an airsoft gun.
1.4 This standard is intended to be a useful tool for air soft
3.1.2 air soft gun, n—device specifically designed to dis-
game organizers, but it is not intended to eliminate the need for
charge air soft projectiles such as but not limited to those
proper game supervision, conforming to Practice F2940.
described in Specification F2748.
1.5 This international standard was developed in accor-
3.1.3 accidental discharge device, n—device specifically
dance with internationally recognized principles on standard-
designed to be installed on an airsoft gun to prevent the
ization established in the Decision on Principles for the
accidental discharge of air soft projectiles.
Development of International Standards, Guides and Recom-
3.1.4 ear canal, nasal and oral cavity protection, n—device
mendations issued by the World Trade Organization Technical
or devices that cover the ear canal, nasal or oral cavities and
Barriers to Trade (TBT) Committee.
prevent direct entry of airsoft projectiles into these areas.
3.1.5 game area, n—area in which airsoft games are con-
2. Referenced Documents
ducted and in which eye protection suitable for airsoft game
2
2.1 ASTM Standards:
play is required to be worn.
3.1.6 goggles, n—eye protection device suitable for use in
1
This practice is under the jurisdiction of ASTM Committee F08 on Sports
air soft games and that meets the requirements in Specification
Equipment, Playing Surfaces, and Facilities and is the direct responsibility of
F2879.
Subcommittee F08.27 on Airsoft.
Current edition approved Dec. 1, 2021. Published December 2021. Originally
3.1.7 goggles on area, n—areas in which all persons are
approved in 2013. Last previous edition approved in 2017 as F2941 – 13 (2017).
required to wear an eye protection device suitable for airsoft
DOI: 10.1520/F2941-21.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
3
Standards volume information, refer to the standard’s Document Summary page on Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
the ASTM website. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F2941 − 21
games, such as and not limited to playing fields, game areas, 6.2.4 While in a goggles-on area, a person must never lift or
chronograph areas, and target ranges. remove his or her goggles for any reason.
6.2.5 Anypersonwhosevisionisimpaired/obsc
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F2941 − 13 (Reapproved 2017) F2941 − 21 An American National Standard
Standard Practice for
1
Air Soft Player Safety Briefing
This standard is issued under the fixed designation F2941; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This practice is intended to provide air soft game organizers with safety information, which can be
given to each game participant prior to the participant’s first game of the day. The intent is to revise
this practice whenever substantive information becomes available which justifies revising existing
requirements or adding new requirements.
1. Scope
1.1 This practice is intended to satisfy the demand for basic safety information, which should be understood by each air soft game
participant prior to the start of the player’s first game on the day of play.
1.2 The information specifies rules of personal conduct, which might affect the safety of persons who are in close proximity to
an air soft gun.
1.3 The information includes procedures to be followed by every person who is in, or near, an area where air soft games are being
played or air soft ammunition is being shot, and to the use of safety equipment related to air soft game or air soft target shooting
activities. These procedures are to be followed any time an air soft gun is being handled.
1.4 This standard is intended to be a useful tool for air soft game organizers, but it is not intended to eliminate the need for proper
game supervision, conforming to Practice F2940.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
2
2.1 ASTM Standards:
F1776 Specification for Eye Protective Devices for Paintball Sports
F2679 Specification for 6 mm Projectiles Used with Airsoft Guns
F2748 Specification for Airsoft Guns
F2879 Specification for Eye Protective Devices for Airsoft Sports
1
This practice is under the jurisdiction of ASTM Committee F08 on Sports Equipment, Playing Surfaces, and Facilities and is the direct responsibility of Subcommittee
F08.27 on Airsoft.
Current edition approved April 1, 2017Dec. 1, 2021. Published April 2017December 2021. Originally approved in 2013. Last previous edition approved in 20132017 as
F2941 – 13.F2941 – 13 (2017). DOI: 10.1520/F2941-13R17.10.1520/F2941-21.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
F2941 − 21
F2940 Practice for Air Soft Field Operation
3
2.2 ANSI Standards:
ANSI Z87.1 American National Standard for Occupational and Educational Personal Eye and Face Protection Devices
3. Terminology
3.1 Definitions of Terms Specific to This Standard:
3.1.1 air soft projectile, n—projectile complying with Specification F2679, which is fired from an airsoft gun.
3.1.2 air soft gun, n—device specifically designed to discharge air soft projectiles such as but not limited to those described in
Specification F2748.
3.1.3 accidental discharge device, n—device specifically designed to be installed on an airsoft gun to prevent the accidental
discharge of air soft projectiles.
3.1.4 ear canal, nasal and oral cavity protection, n—device or devices that cover the ear canal, nasal or oral cavities and prevent
direct entry of airsoft projectiles into these areas.
3.1.5 game area, n—area in which airsoft games are conducted and in which eye protection suitable for airsoft game play is
required to be worn.
3.1.6 goggles, n—eye protection device suitable for use in air soft games.games and that meets the requirements in Specification
F2879.
3.1.7 goggles on area, n—areas in which all persons are required to wear an eye protection device suitable for airsoft games, such
as and not limited to playing fields, game areas, chronograph areas, and target ranges.
3.1.
...