Small craft - Steering gear - Geared link systems (ISO 13929:2001)

This International Standard specifies the minimum level of requirements for construction, operation and installation
of geared link steering systems on all types of small craft of hull length up to 24 m.
It excludes steering systems covered by ISO 8848 and ISO 9775.

Kleine Wasserfahrzeuge - Ruderanlagen - Mechanisch verbundene Systeme (ISO 13929:2001)

Petits navires - Appareils à gouverner - Transmissions à engrenages (ISO 13929:2001)

La pnésente Norme intemationale spéciffie le niveau minimal des exigences de construction, de fonctionnement et d'installation des transmissions à engrenages, sur tous les types de petits navires d'une longueur de coque maximale de 24 m.  Elle exclut les appareils à gouverner relevant de l'ISO 8848 et de l'ISO 9775.

Mala plovila - Krmilna naprava - Sistemi povezave s prestavo (ISO 13929:2001)

Ta mednarodni standard določa minimalno raven zahtev za konstrukcijo, delovanje in namestitev krmilnih sistemov z usmerjeno povezavo na vse vrste majhnih plovil dolžine trupa do 24 m.
Ne velja za krmilne sisteme, zajete v standardih ISO 8848 in ISO 9775.

General Information

Status
Published
Publication Date
15-Aug-2017
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
16-Aug-2017
Completion Date
16-Aug-2017

RELATIONS

Buy Standard

Standard
EN ISO 13929:2017
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Mala plovila - Krmilna naprava - Sistemi povezave s prestavo (ISO 13929:2001)Kleine Wasserfahrzeuge - Ruderanlagen - Mechanisch verbundene Systeme (ISO 13929:2001)Petits navires - Appareils à gouverner - Transmissions à engrenages (ISO 13929:2001)Small craft - Steering gear - Geared link systems (ISO 13929:2001)47.080ýROQLSmall craft47.020.70Navigacijska in krmilna opremaNavigation and control equipmentICS:Ta slovenski standard je istoveten z:EN ISO 13929:2017SIST EN ISO 13929:2017en,fr,de01-oktober-2017SIST EN ISO 13929:2017SLOVENSKI

STANDARDSIST EN ISO 13929:20011DGRPHãþD
SIST EN ISO 13929:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 13929
August
t r s y ICS
v yä r z r Supersedes EN ISO
s u { t {ã t r r sEnglish Version
Petits navires æ Appareils à gouverner æ Transmissions

Kleine Wasserfahrzeuge æ Ruderanlagen æ Mechanisch This European Standard was approved by CEN on

s x July
t r s yä

egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä

translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä

CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels

t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN ISO

s u { t {ã t r s y ESIST EN ISO 13929:2017

EN ISO 13929:2017 (E) 2 Contents Page European foreword ....................................................................................................................................................... 3 Annex ZA (informative)

Relationship between this European Standard and the Essential Requirements of EU Directive 2013/53/EU .......................................................................................... 4

SIST EN ISO 13929:2017

EN ISO 13929:2017 (E) 3 European foreword The text of ISO 13929:2001 has been prepared by Technical Committee ISO/TC 188 “Small craft” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 13929:2017. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by February 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 13929:2001. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 13929:2001 has been approved by CEN as EN ISO 13929:2017 without any modification. SIST EN ISO 13929:2017

EN ISO 13929:2017 (E) 4 Annex ZA (informative)

Relationship between this European Standard and the Essential Requirements of EU Directive 2013/53/EU This European standard has been prepared under a mandate given to CEN by the European Commission to provide one means of conforming to Essential Requirements of the New Approach Directive 2013/53/EU. Once this standard is cited in the Official Journal of the European Union under that Directive and has been implemented as a national standard in at least one member state, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. Table ZA.1 — Correspondence between this European Standard and Directive 2013/53/EU Clauses/sub-clauses of this standard Corresponding annexes/paragraphs of Directive 2013/53/EU Comments Clauses 1; 2; 3; 4; 5; 6 and 7 Annex 1.A.5.4.1 Steering system - general

The correspondence between this European standard and Directive 2013/53/EU is in respect of the construction, installation and testing of gear link steering systems; that is a system that positions the rudder blade(s) only.

This European standard excludes emergency steering arrangements where required by I.A.5.4.2; remote control cable steering systems used for the control of outboard motors; and other types of propulsion control systems. Clause 8.1 Annex 1.A.2.5 Owner’s Manual It is recommended that maintenance procedures and the largest wheel diameter provided in the installers manual (clause 8.2) are included in the owner’s manual. WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. SIST EN ISO 13929:2017

ReferencenumberISO13929:2001(E)©ISO2001INTERNATIONALSTANDARDISO13929Firstedition2001-01-15Smallcraft—Steeringgear—GearedlinksystemsPetitsnavires—Appareilsàgouverner—TransmissionsàengrenagesSIST EN ISO 13929:2017

ISO13929:2001(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2001Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostale56CH-1211Geneva20Tel.+41227490111Fax+41227490947E-mailcopyright@iso.chWebwww.iso.chPrintedinSwitzerlandii©ISO2001–AllrightsreservedSIST EN ISO 13929:2017

ISO13929:2001(E)©ISO2001–AllrightsreservediiiForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).T

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.