EN 16908:2017+A1:2022
(Main + Amendment)Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804
Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804
The general scope of the core product category rules (PCR) is given in EN 15804:2012+A2:2019, Clause 1.
This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime.
In other respects, the scope is as in EN 15804:2012+A2:2019.
Zement und Baukalk - Umweltproduktdeklarationen - Produktkategorieregeln in Ergänzung zu EN 15804
Der allgemeine Anwendungsbereich der grundlegenden Produktkategorieregeln (PCR) ist in !EN 15804:2012+A2:2019", Abschnitt 1, angegeben.
Diese PCR dient in erster Linie der Erstellung von „von der Wiege bis zum Werkstor“-EPDs für Zement und Baukalk.
Ansonsten entspricht der Anwendungsbereich dem von !EN 15804:2012+A2:2019".
Ciment et chaux de construction - Déclarations environnementales sur les produits - Règles de catégorie de produits complémentaires de lEN 15804
Le domaine d’application général des règles de catégorie de produits (RCP) de base est donné dans lEN 15804:2012+A2:2019, Article 1.
Les présentes RCP sont principalement destinées à la création de DEP du berceau à la sortie de l’usine relatives au ciment et à la chaux de construction.
Concernant les autres aspects, le domaine d’application est celui de l’EN 15804:2012+A2:2019.
Cement in gradbeno apno - Okoljske deklaracije za proizvode - Pravila za kategorije proizvodov, ki dopolnjujejo EN 15804 (vključno z dopolnilom A1)
Splošno področje uporabe osnovnih pravil za kategorije proizvodov (PCR) je podano v standardu EN 15804:2012+A2:2019, točka 1.
Ta pravila za kategorije proizvodov so namenjena predvsem za pripravo okoljskih deklaracij za proizvode (»od zibelke do vrat«) za cement in gradbeno apno.
V drugih pogledih je področje uporabe v skladu s standardom EN 15804:2012+A2:2019.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2022
Cement in gradbeno apno - Okoljske deklaracije za proizvode - Pravila za
kategorije proizvodov, ki dopolnjujejo EN 15804 (vključno z dopolnilom A1)
Cement and building lime - Environmental product declarations - Product category rules
complementary to EN 15804
Zement und Baukalk - Umweltproduktdeklarationen - Produktkategorieregeln in
Ergänzung zu EN 15804
Ciment et chaux de constructions - Déclaration environnementales sur les produits -
Règles de catégorie de produits complémentaires de l'EN 15804
Ta slovenski standard je istoveten z: EN 16908:2017+A1:2022
ICS:
13.020.20 Okoljska ekonomija. Environmental economics.
Trajnostnost Sustainability
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 16908:2017+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 91.010.99; 91.100.10 Supersedes EN 16908:2017
English Version
Cement and building lime - Environmental product
declarations - Product category rules complementary to
EN 15804
Ciment et chaux de constructions - Déclaration Zement und Baukalk - Umweltproduktdeklarationen -
environnementales sur les produits - Règles de Produktkategorieregeln in Ergänzung zu EN 15804
catégorie de produits complémentaires de l'EN 15804
This European Standard was approved by CEN on 21 November 2016 and includes Amendment 1 approved by CEN on 10
January 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 16908:2017+A1:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Abbreviations . 6
5 General aspects . 6
5.1 Objective of the Core PCR . 6
5.2 Types of EPD with respect to life cycle stages covered . 6
5.3 Comparability of EPD for construction products . 7
5.4 !Additional environmental information . 7
5.4.1 General . 7
5.4.2 Additional impact indicators . 7
5.4.3 Additional information on carbon offset, carbon storage and delayed emissions . 7
5.4.4 Additional Information not derived from LCA . 7
5.5 Ownership, responsibility and liability for the EPD . 7
5.6 Communication formats . 8
6 Product Category Rules for LCA . 8
6.1 Product category . 8
6.2 Life cycle stages and their information modules to be included . 8
6.2.1 General . 8
6.2.2 A1-A3, Product stage, information modules . 8
6.2.3 A4-A5, Construction process stage, information modules . 8
6.2.4 B1-B5, Use stage, information modules related to the building fabric . 8
6.2.5 B6-B7, Use stage, information modules related to the operation of the building . 8
6.2.6 C1-C4, End-of-life-stage, information modules. 8
6.2.7 D, Benefits and loads beyond the system boundary, information module . 8
6.3 Calculation rules for the LCA . 8
6.3.1 !Functional or declared unit . 8
6.3.2 !Functional unit . 9
6.3.3 Declared unit . 9
6.3.4 Reference service life (RSL). 9
6.3.5 System boundaries . 9
6.3.6 Criteria for the exclusion of inputs and outputs . 13
6.3.7 Selection of data . 13
6.3.8 !Data quality . 13
6.3.9 Developing product level scenarios . 14
6.3.10 Units . 14
6.4 Inventory analysis . 14
6.4.1 Collecting data . 14
6.4.2 Calculation procedures . 14
6.4.3 Allocation of input flows and output emissions . 14
6.4.4 !Information on biogenic carbon content . 15
6.5 Impact assessment . 15
6.5.1 !General . 15
6.5.2 Core environmental impact indicators . 15
6.5.3 Additional environmental impact indicators . 15
7 Content of the EPD . 15
7.1 Declaration of general information . 15
7.2 Declaration of environmental parameters derived from LCA. 16
7.2.1 General . 16
7.2.2 Rules for declaring LCA information per module . 17
7.2.3 !Indicators describing environmental impacts based on Life Cycle Impact
Assessment (LCIA) . 17
7.2.4 !Indicators describing resource use and environmental information based on Life
Cycle Inventory (LCI) . 18
7.2.5 !Information on biogenic carbon content . 18
7.3 Scenarios and additional technical information . 18
7.3.1 General . 18
7.3.2 Construction process stage . 18
7.3.3 B1-B7 Use stage . 18
7.3.4 End-of-life . 18
7.3.5 Carbonation in cement-based products . 18
7.3.6 Carbonation in building lime . 19
7.4 Additional information on release of dangerous substances to indoor air, soil and
water during the use stage . 19
7.5 Aggregation of information modules . 19
8 Project report . 19
9 Verification and validity of an EPD . 19
Bibliography . 27
European foreword
This document (EN 16908:2017+A1:2022) has been prepared by Technical Committee CEN/TC 51
“Cement and building limes”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1 approved by CEN on 10 January 2022.
This document supersedes !EN 16908:2017".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association.
Any feedback and qu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.