EN 13698-2:2009

Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets

This European Standard specifies the manufacturing characteristics of flat re-usable wooden 1000 mm × 1200 mm, double deck, non-reversible, 4-way entry, 9 block skid and perimeter base pallets suitable for transport, storage, handling or exchange use. It also gives some requirements for manufacture and marking and addresses the issue of safety.

Produktspezifikation für Paletten - Teil 2: Herstellung von 1 000 mm x 1 200 mm-Flachpaletten aus Holz

Diese Europäische Norm legt die Herstellungsmerkmale der wiederverwendbaren Holz-Doppeldeck-, nicht
umkehrbaren Vierweg-Flachpalette 1 000 mm × 1 200 mm, 9-Klotz-Kufenpalette und Fensterpalette für den
Transport, die Lagerung, die Handhabung oder den Austausch fest. Diese Norm legt auch einige Anforderungen
für die Herstellung und für die Kennzeichnung fest und spricht Fragen der Sicherheit an.

Spécification de produit pour les palettes - Partie 2 : Spécification de fabrication des palettes plates en bois, de dimensions 1000 mm x 1200 mm

La présente Norme européenne spécifie les caractéristiques de fabrication d'une palette plate réutilisable en
bois, à double plancher, non réversible, à quatre entrées, à neuf dés, à semelles et à plancher inférieur
périmétrique, de dimensions 1 000 mm × 1 200 mm, destinée au transport, au stockage, à la manutention ou
à l'échange. Elle donne également certaines exigences relatives à la fabrication et au marquage et traite de la
question de la sécurité.

Specifikacija izdelovanja palet - 2. del: Specifikacija za konstrukcijo ravnih lesenih palet 1000 mm x 1200 mm

General Information

• Status: Published
• Publication Date: 23-Jun-2009
• Withdrawal Date: 30-Dec-2009
• ICS: 55.180.20 - General purpose pallets
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 34 - Pallets
• Current Stage: 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
• Completion Date: 29-Mar-2021
• Ref Project: SIST EN 13698-2:2009 - Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets

Relations

• Replaces: EN 13698-2:2003 - Pallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Specifikacija izdelovanja palet - 2. del: Specifikacija za konstrukcijo ravnih lesenih palet 1000 mm x 1200 mmProduktspezifikation für Paletten - Teil 2: Herstellung von 1 000 mm x 1 200 mm-Flachpaletten aus HolzSpécification de produit pour les palettes - Partie 2 : Spécification de fabrication des palettes plates en bois, de dimensions 1000 mm x 1200 mmPallet production specification - Part 2: Construction specification for 1000 mm x 1200 mm flat wooden pallets55.180.20General purpose palletsICS:Ta slovenski standard je istoveten z:EN 13698-2:2009SIST EN 13698-2:2009en,fr,de01-november-2009SIST EN 13698-2:2009SLOVENSKI
STANDARDSIST EN 13698-2:20031DGRPHãþD

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13698-2June 2009ICS 55.180.20Supersedes EN 13698-2:2003
English VersionPallet production specification - Part 2: Constructionspecification for 1000 mm x 1200 mm flat wooden palletsSpécification de produit pour les palettes - Partie 2 :Spécification de fabrication des palettes plates en bois, dedimensions 1000 mm x 1200 mmProduktspezifikation für Paletten - Teil 2: Herstellung von 1000 mm x 1 200 mm-Flachpaletten aus HolzThis European Standard was approved by CEN on 27 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13698-2:2009: ESIST EN 13698-2:2009

Materials . 13A.1Timber . 13A.2Timber quality grade . 13A.3Particle board . 14A.4Fasteners . 16Annex B (informative)
Wood shrinkage – Comparative wood shrinkage/expansion rates . 19Annex C (normative)
Joint separation test . 20C.1Test apparatus . 20C.2Test pieces . 20C.3Procedure . 21C.4Test results . 21C.5Report . 21Annex D (normative)
Preservatives – General policy . 22Annex E (informative)
Safe working load under different loading conditions – General policy . 23Bibliography . 24 SIST EN 13698-2:2009

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13698-2:2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13698-2:2009

6.1.4 Particle board High density, moisture resistant particle board conforming to A.3 is permitted for blocks. 6.1.5 Fasteners Pallets shall be assembled with fasteners conforming to A.4. SIST EN 13698-2:2009

Component a Number of components Dimensions at 20% moisture content mm Length Width b Thickness b 1 top deck lead board 2 1200 ± 3 145 73+− 22 20+ 2 intermediate top deck board 4 1200 ± 3 100 ± 3 22 20+ 3 central top deck board 1 1200 ± 3 145 73+− 22 20+ 4 stringer board 3 1000 ± 3 145 73+− 25 20+ 5 bottom deck board 3 1200 ± 3 145 73+− 22 20+ 6 block 9 145 73+− 145 73+− 78 13+− 7 nail 27
See A.4. 8 nail 27 9 nail or staples 36 a See Figure 1. b See Annex B.
...