55.180 - Freight distribution of goods

EN-ISO 16106 gives guidance on the application of a quality management system in the manufacture, measuring and monitoring of design type approved dangerous goods packaging, intermediate bulk containers (IBCs) and large packaging.This document does not include guidance specific to other management systems, such as those for environmental management, occupational health and safety management, or financial management.$0$0It is applicable to an organization that) needs to demonstrate its ability to...view more

This document specifies the design, performance and testing requirements for "Cargo Stopper" air cargo restraint accessories with a 22 250 N (5 000 lbf) rated load capacity, to be used in conjunction with air cargo restraint straps meeting ISO 16049-1 (TSO/ETSO ̶ C172), or air cargo restraint slings meeting ISO 20291-1, with the same rated load. Cargo stopper devices designed to this document are intended to be used in either of the following typical instances: a) to ensure restraint/tie-down of...view more

This standard establishes general rules for the compilation of performance test schedules for complete, filled transport packages intended for use within any distribution system except for the packages used for dangerous goods.

This document establishes a classification of series 1 freight containers based on external dimensions, and specifies the associated ratings and, where appropriate, the minimum internal and door opening dimensions for certain types of containers. These containers are intended for intercontinental traffic. This document summarizes the external and some of the internal dimensions of series 1 containers. The dimensions of each type of container are defined in the appropriate part of ISO 1496, which...view more

This document specifies the minimum requirements and test methods for lashing points for cargo securing on commercial vehicles and intermodal loading units for cargo transport.
This document does not apply to:
-   Vehicles and intermodal loading units manufactured before publication of this standard;
-   Vehicles and intermodal loading units designed and constructed exclusively for the transport of bulk materials;
-   Vehicles and intermodal loading units designed and constructed exclusively for t...view more

This document specifies minimum requirements for the strength and attachment of tarpaulins used as curtainsiders on intermodal loading units and commercial vehicles.
NOTE   The described tarpaulins according to this standard only work for load securing with a body according to EN12642, Code XL or EN 283.

This document specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies and utility vehicles for road and road/rail combined (intermodal transport) traffic.

This document specifies the minimum requirements and test methods for lashing points for cargo securing on commercial vehicles and intermodal loading units for cargo transport.
This document does not apply to:
-   Vehicles and intermodal loading units manufactured before publication of this standard;
-   Vehicles and intermodal loading units designed and constructed exclusively for the transport of bulk materials;
-   Vehicles and intermodal loading units designed and constructed exclusively for t...view more

This document specifies minimum requirements for the strength and attachment of tarpaulins used on swap bodies and utility vehicles for road and road/rail combined (intermodal transport) traffic.

This document specifies minimum requirements for the strength and attachment of tarpaulins used as curtainsiders on intermodal loading units and commercial vehicles.
NOTE   The described tarpaulins according to this document only work for load securing with a body according to EN12642, Code XL or EN 283.

This document establishes general rules for the compilation of performance test schedules for complete, filled transport packages intended for use within any distribution system except for the packages used for dangerous goods.

This document establishes general rules for the compilation of performance test schedules for complete, filled transport packages intended for use within any distribution system except for the packages used for dangerous goods.

This document describes the design of the mechanical refrigeration unit (MRU) and operation of container refrigerating systems in all anticipated operational modes and locations. It describes the industry's best practices for the safe operation of flammable refrigerants in refrigerating systems used in thermal freight containers operated on board ships, in terminals, on road, on rail and on land. This document addresses the use of flammable refrigerants with classifications defined in ISO 817, d...view more

The standard applies to thermally insulated means of transport used for
temperature sensitive goods in order to limit the heat exchange to the external
conditions. If certain temperatures have to be maintained, the above means of
transport could be additionally provided with a cooling and/or heating device.
This standard specifies the terminology, the requirements for thermal insulation,
air tightness, test provisions, dimensioning of equipment with cooling and/or
heating device.
This standard s...view more

This document applies to all thermally insulated means of transport, including: trucks, trailers, tanks, vans, wagons, containers for land transport, small containers, packaging. It is related to every type of insulation. If certain temperatures are due to be maintained independently of external conditions, the above means of transport could be additionally provided with a cooling and/or heating device.
This document specifies the terminology, the requirements for thermal insulation, air tightn...view more

This document establishes requirements for transport and condition monitoring of transported consignments such as agri-food and perishable goods, through applications, models, processes, and information bundles. This document applies to both domestic and cross-border transport of transported consignments, and incorporates the methods described in ISO/IEC 19845, ISO/TS 24533 and ISO/TS 17187 which are transport domain specific, as discussed in the Introduction. Specific extensions include additio...view more

This document specifies the basic specifications and testing requirements for ISO series 1 tank containers suitable for the carriage of gases, liquids and solid substances (dry bulk) which can be loaded or unloaded as liquids by gravity or pressure discharge, for international exchange and for conveyance by road, rail and sea, including interchange between these forms of transport. Except where otherwise stated, the requirements of this document are minimum requirements.

This European Standard specifies the minimum requirements for securing payload to ensure safe operation of freight wagons, utilizing a train speed of 120 km/h it is serving as a basis for the design and implementation of payload securing methods.
In the case of wagons designed for the transport of special payload and/or with integrated load securement (e.g. tank wagons, hopper wagons, car carriers, coil carriers and wagons for intermodal transport) special requirements have also to be observed.

This document specifies the minimum requirements for securing payload to ensure safe operation of freight wagons, utilizing a train speed of up to 120 km/h. It is serving as a basis for the design and implementation of payload securing methods.
Additional requirements in the case of wagons designed for the transport of special payload and/or with integrated load security (e.g. tank wagons, hopper wagons, car carriers, coil carriers and wagons for intermodal transport) are not part of this docum...view more

This document gives the basic specifications and testing requirements for ISO series 1 thermal containers for international exchange and for conveyance of goods by road, rail and sea, including interchange between these forms of transport.