EN 3660-064:2016

Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard

This European Standard defines a range of cable outlets, style K, straight, shielded, sealed, self-locking (anti-rotational) for heat shrinkable boot, and / or metallic band under the following conditions:
The mating connectors are listed in EN 3660-002.

Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 064: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd für EN 2997 - Produktnorm

Série aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 064 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable, auto-freiné pour EN 2997 - Norme de produit

Aeronavtika - Dodatki za okrogle in pravokotne električne in optične konektorje - 064. del: Kabelska spojka, tip K, ravna, za toplotno skrčljive dele, oklopljena, tesnjena, samozapiralna za EN 2997 - Standard za proizvod

Ta evropski standard opredeljuje različne vrste kabelskih spojk tipa K, ravne, oklopljene, tesnjene, samozapiralne (nerotacijske), za toplotno skrčljive dele in/ali kovinske trakove za uporabo v naslednjih pogojih.
Stikalni priključki so navedeni v standardu EN 3660-002.
OPOMBA: Razred N v standardu EN 3660-001 pomeni razred F v standardu EN 3660-064.
Temperaturni obseg, razred F (N): od −65 °C do 200 °C (glej opombo zgoraj);
Razred K: od −65 °C do 200 °C;
Razred KE: od −65 °C do 260 °C;
Razred W: od −65 °C do 175 °C;
Razred T: od −65 °C do 175 °C (nikljeva prevleka PTFE);
Razred Z: od −65 °C do 175 °C (cink-nikljeva prevleka).
Povezani električni dodatki: EN 3660-033 Kovinski trak (za zaključni oklop).
Te kabelske spojke so zasnovane za zaključitev celotne oklopljene pletenice in/ali posameznih kabelskih oklopov. Omogočajo/dovoljujejo zaključevanje toplotno skrčljivih delov.

General Information

• Status: Withdrawn
• Publication Date: 05-Jan-2016
• Withdrawal Date: 03-May-2022
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 04-May-2022
• Ref Project: SIST EN 3660-064:2016 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard

Relations

• Replaces: EN 3660-064:2009 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 and EN 4067 - Product standard
• Effective Date: 08-Jun-2022
• Replaced By: EN 3660-064:2022 - Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking - Product standard
• Effective Date: 11-May-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Endgehäuse für elektrische und optische Rund- und Rechtecksteckverbinder - Teil 064: Endgehäuse, Bauform K, gerade, für wärmeschrumpfende Bauteile, Schirmanschluß, abgedichtet, selbstsichernd für EN 2997 - ProduktnormSérie aérospatiale - Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques - Partie 064 : Raccord, type K, droit, blindé, étanche, pour manchon thermorétractable, auto-freiné pour EN 2997 - Norme de produitAerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 2997 - Product standard49.060Aerospace electric equipment and systems31.220.99Druge elektromehanske komponenteOther electromechanical componentsICS:Ta slovenski standard je istoveten z:EN 3660-064:2016SIST EN 3660-064:2016en,fr,de01-marec-2016SIST EN 3660-064:2016SLOVENSKI
STANDARDSIST EN 3660-064:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3660-064
January
t r s x ICS
v {ä r x r Supersedes EN
u x x ræ r x vã t r r {English Version
Aerospace series æ Cable outlet accessories for circular and rectangular electrical and optical connectors æ Part
r x vã Cable outletá style Ká straightá for heat shrinkable bootá shieldedá sealedá selfælocking for EN
t { { y æ Product standard Série aérospatiale æ Accessoires arrière pour connecteurs circulaires et rectangulaires électriques et optiques æ Partie
r x v ã Raccordá type Ká droitá blindéá étancheá pour manchon thermorétractableá autoæfreiné pour EN
t { { y æ Norme de produit
Luftæ und Raumfahrt æ Endgehäuse für elektrische und optische Rundæ und Rechtecksteckverbinder æ Teil
r x vã Endgehäuseá Bauform Ká geradeá für wärmeschrumpfende Bauteileá Schirmanschlußá abgedichtetá selbstsichernd für EN
t { { y æ Produktnorm This European Standard was approved by CEN on
z June
t r s wä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey andUnited Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
u x x ræ r x vã t r s x ESIST EN 3660-064:2016

EN 2591- 1), Aerospace series — Elements of electrical and optical connection — Test methods EN 2997 (series), Aerospace series — Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures − 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak
EN 3660-001, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 001: Technical specification
EN 3660-002, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 002: Index of product standards
EN 3660-033, Aerospace series — Cable outlet accessories for circular and rectangular electrical and optical connectors — Part 033: Stainless steel banding band, style Z, for attachment of individual and/or overall screens to cable outlets — Product standard 2) AS85049A, Connector accessories, electrical general specification for- 3) IEC 60529, Degrees of protection provided by enclosures (IP Code)
DIN 82, Knurling
1) All its parts quoted in this European Standard. 2) In preparation at the date of publication of this European Standard. 3) Published by: SAE National (US) Society of Automotive Engineers http://www.sae.org/ SIST EN 3660-064:2016

Key 1 Thread C 2 Marking 3 Number of teeth N 4 Four tooling holes spaced 90° apart. Ø 2,60, depth, 1,27 5 Straight knurl. Pitch manufacturer’s option. 6 RKV 08 DIN 82. Figure 2. (Please note there may be crossover dependent on diameter and pitch) 7 Clearance on thread C 8 Break edge NOTE 1 Cable outlets may be manufactured as cast, fabricated or machined (manufactures option) NOTE 2 No sharp edges / burrs permissible on internal or external surfaces / joints. Surface finish of
on all internal surfaces Figure 1 1,6 µm max. SIST EN 3660-064:2016

Table 2 — Variable dimensions of wiring chamber Dimensions in millimetres Length code wiring chamber H J max. max. A 27,5 8,57 B 35,5 16,57 C 40,5 21,60 D 50,5 31,60 The code and dimensions of the wiring chamber shall be valid for all sizes of cable outlet.
Table 3 — Mass for classes F (N), T, W and Z
Nominal mass in grams Shell size code Cable entry – size code Length code wiring chamber A B C D E F G H J K L M 08 10,7 11,3 — — — — — — — — — — A 11,4 12,0 — — — — — — — — — — B 11,9 12,5 — — — — — — — — — — C 12,7 13,3 — — — — — — — — — — D 10 12,4 13,1 13,7 14,3 — — — — — — — — A 13,4 14,1 14,7 15,3 — — — — — — — — B 14,0 14,7 15,3 15,9 — — — — — — — — C SIST EN 3660-064:2016
...