EN 3687:2010

Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1 100 MPa/650 °C

This standard specifies the characteristics of silver-plated Bolts normal Hexagon Head with relieved shank and long thread, in heat resisting steel FE-PA92HT (A286), tensile strength class 1 100 MPa at room temperature. The maximum test temperature of the material is 650 °C.

Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus hochwarmfesten Stahl FE-PA92HT (A286) versilbert - Klasse: 1 100 MPa/650 °C

Diese Norm legt die Eigenschaften von Sechskantschrauben mit Dünnschaft und langem Gewinde aus hochwarmfestem Stahl FE-PA92HT (A286), versilbert, Zugfestigkeitsklasse 1 100 MPa bei Raumtemperatur, fest. Die maximale Prüftemperatur des Werkstoffes beträgt 650 °C.

Série aérospatiale - Vis à tête hexagonale normale, fût dégagé filetage long, en acier résistant à chaud FE-PA92HT (A286), argentées - Classification: 1 100 MPa/650 °C

Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz toplotnoodpornega jekla FE-PA92HT (A286), posrebreni - Klasifikacija: 1100 MPa/650 °C

Ta standard določa značilnosti posrebrenih sornikov z normalno šestrobo glavo, tankim steblom in dolgim navojem iz toplotnoodpornega jekla FE-PA92HT (A286), razreda natezne trdnosti 1100 MPa pri sobni temperaturi. Maksimalna preskusna temperatura materiala je 650 °C.

General Information

• Status: Published
• Publication Date: 21-Dec-2010
• Withdrawal Date: 29-Jun-2011
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Dec-2010
• Completion Date: 22-Dec-2010
• Ref Project: SIST EN 3687:2012 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa/650°C

Relations

• Corrected By: EN 3687:2010/AC:2011 - Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 1 100 MPa/650 °C
• Effective Date: 06-Aug-2011

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3687:2012
01-januar-2012
Aeronavtika - Sorniki, normalna šestroba glava, tanko steblo, dolg navoj, iz
toplotnoodpornega jekla FE-PA92HT (A286), posrebreni - Klasifikacija: 1100
MPa/650 °C
Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat
resisting steel FE-PA92HT (A286), silver plated - Classification: 1100 MPa/650°C
Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft, langes Gewinde, aus
hochwarmfesten Stahl FE-PA92HT (A286) versilbert - Klasse: 1100MPa/650°C
Série aérospatiale - Vis à tête hexagonale normale, fût dégagé filetage long, en acier
résistant à chaud FE-PA92HT (A286), argentées - Classification: 1100 MPa/650°C
Ta slovenski standard je istoveten z: EN 3687:2010
ICS:
49.030.20 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
SIST EN 3687:2012 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3687:2012

---------------------- Page: 2 ----------------------

SIST EN 3687:2012


EUROPEAN STANDARD
EN 3687

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2010
ICS 49.030.20
English Version
Aerospace series - Bolts, normal hexagon head, relieved shank,
long thread, in heat resisting steel FE-PA92HT (A286), silver
plated - Classification: 1 100 MPa/650 °C
Série aérospatiale - Vis à tête hexagonale normale, fût Luft- und Raumfahrt - Sechskantschrauben, Dünnschaft,
dégagé filetage long, en acier résistant à chaud FE- langes Gewinde, aus hochwarmfesten Stahl FE-PA92HT
PA92HT (A286), argentées - Classification: 1 100 MPa/650 (A286) versilbert - Klasse: 1 100 MPa/650 °C
°C
This European Standard was approved by CEN on 15 August 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3687:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3687:2012
EN 3687:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Required characteristics .4
3.1 Configuration – Dimensions – Tolerances .4
3.2 Surface roughness .4
3.3 Material .4
3.4 Surface treatment .4
4 Designation . 11
5 Marking . 11
6 Technical specification . 11

2

---------------------- Page: 4 --------------
...