EN ISO 12999-2:2020
(Main)Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
Acoustics - Determination and application of measurement uncertainties in building acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
This document specifies how to calculate:
— the uncertainty of sound absorption coefficients and equivalent sound absorption areas measured according to ISO 354;
— the uncertainty of the practical and weighted sound absorption coefficients determined according to ISO 11654;
— the uncertainty of the object sound absorption coefficient according to ISO 20189; and
— the uncertainty of the single number rating determined according to EN 1793‑1.
Furthermore, the use of uncertainties in reporting measured or weighted sound absorption coefficients is explained.
Akustik - Bestimmung und Anwendung der Messunsicherheiten in der Bauakustik - Teil 2: Schalldämpfung (ISO 12999 2:2020)
Dieses Dokument legt fest, wie Folgendes zu berechnen ist:
— die Unsicherheit von nach ISO 354 gemessenen Schallabsorptionsgraden und äquivalenten Schall-absorptionsflächen;
— die Unsicherheit der nach ISO 11654 ermittelten praktischen und bewerteten Schallabsorptionsgrade;
— die Unsicherheit des Schallabsorptionsgrades einzelner Objekte nach ISO 20189;
— die Unsicherheit der nach EN 1793 1 ermittelten Einzahl Angabe.
Des Weiteren wird die Verwendung von Unsicherheiten bei der Angabe von gemessenen oder bewerteten Schallabsorptionsgraden erläutert.
Acoustique - Détermination et application des incertitudes de mesure dans l'acoustique des bâtiments - Partie 2: Absorption acoustique (ISO 12999-2:2020)
Le présent document spécifie comment calculer:
— l'incertitude des coefficients d'absorption acoustique et des aires d'absorption acoustique équivalentes mesurés conformément à l'ISO 354;
— l'incertitude des coefficients d'absorption acoustique pratiques et pondérés déterminés conformément à l'ISO 11654;
— l'incertitude du coefficient d'absorption acoustique d'un objet conformément à l'ISO 20189; et
— l'incertitude de l'indice unique d'évaluation déterminé conformément à l'EN 1793-1.
Il explique également comment utiliser les incertitudes pour consigner dans le rapport les coefficients d'absorption acoustique mesurés ou pondérés.
Akustika - Ugotavljanje in uporaba merilne negotovosti v gradbeni akustiki - 2. del: Absorpcija zvoka (ISO 12999-2:2020)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2020
Akustika - Ugotavljanje in uporaba merilne negotovosti v gradbeni akustiki - 2. del:
Absorpcija zvoka (ISO 12999-2:2020)
Acoustics - Determination and application of measurement uncertainties in building
acoustics - Part 2: Sound absorption (ISO 12999-2:2020)
Akustik - Bestimmung und Anwendung der Messunsicherheiten in der Bauakustik - Teil
2: Schalldämpfung (ISO 12999-2:2020)
Acoustique - Détermination et application des incertitudes de mesure dans l'acoustique
des bâtiments - Partie 2: Absorption acoustique (ISO 12999-2:2020)
Ta slovenski standard je istoveten z: EN ISO 12999-2:2020
ICS:
17.140.01 Akustična merjenja in Acoustic measurements and
blaženje hrupa na splošno noise abatement in general
91.120.20 Akustika v stavbah. Zvočna Acoustics in building. Sound
izolacija insulation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12999-2
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 17.140.01; 91.120.20
English Version
Acoustics - Determination and application of measurement
uncertainties in building acoustics - Part 2: Sound
absorption (ISO 12999-2:2020)
Acoustique - Détermination et application des Akustik - Bestimmung und Anwendung der
incertitudes de mesure dans l'acoustique des Messunsicherheiten in der Bauakustik - Teil 2:
bâtiments - Partie 2: Absorption acoustique (ISO Schalldämpfung (ISO 12999-2:2020)
12999-2:2020)
This European Standard was approved by CEN on 5 July 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12999-2:2020 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12999-2:2020) has been prepared by Technical Committee ISO/TC 43
"Acoustics" in collaboration with Technical Committee CEN/TC 126 “Acoustic properties of building
elements and of buildings” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2021, and conflicting national standards shall
be withdrawn at the latest by January 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12999-2:2020 has been approved by CEN as EN ISO 12999-2:2020 without any
modification.
INTERNATIONAL ISO
STANDARD 12999-2
First edition
2020-06
Acoustics — Determination and
application of measurement
uncertainties in building acoustics —
Part 2:
Sound absorption
Acoustique — Détermination et application des incertitudes de
mesure dans l'acoustique des bâtiments —
Partie 2: Absorption acoustique
Reference number
ISO 12999-2:2020(E)
©
ISO 2020
ISO 12999-2:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
ISO 12999-2:2020(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 General approach . 3
5 Standard uncertainties in one-third octave bands . 3
6 Standard uncertainties for the practical sound absorption coefficient .4
7 Standard uncertainties of single number values . 5
8 Reporting uncertainties . 5
Bibliography . 8
ISO 12999-2:2020(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 2,
Building acoustics, in collaboration with the European Committee for Standardization (CEN) Technical
Committee CEN/TC 126, Acoustic properties of building elements and of buildings, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
A list of all parts in the ISO 12999 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2020 – All rights reserved
ISO 12999-2:2020(E)
Introduction
An assessment of uncertainties that is comprehensible and close to reality is indispensable for reporting
and applying measured sound absorption. Uncertainties should preferably be determined following the
principles of ISO/IEC Guide 98-3.
ISO/IEC Guide 98-3 specifies a detailed procedure for the uncertainty evaluation that is based upon a
complete mathematical model of the measurement procedure. At the current knowledge, it is impossible
to formulate these models for sound absorption measurements according to ISO 354 and evaluations
according to ISO 11654 or similar. To come to uncertainties all the same, the concept of reproducibility
and repeatability is applied in this document. This concept offers the possibility to state the uncertainty
of a method and of measurements carried out according to the method, based on the results of inter-
laboratory measurements.
Observed uncertainties are probably caused by different laboratory designs. When the method of
ISO 354 for measuring sound absorption is modified, other uncertainties than the ones given in this
document can be applicable.
INTERNATIONAL STANDARD ISO 12999-2:2020(E)
Acoustics — Determination and application of
measurement uncertainties in building acoustics —
Part 2:
Sound absorption
1 Scope
This document specifies how to calculate:
— the uncertainty of sound absorption coefficients and equivalent sound absorption areas measured
according to ISO 354;
— the uncertainty of the practical and weighted sound absorption coefficients determined according
to ISO 11654;
— the uncertainty of the object sound absorption coefficient according to ISO 20189; and
— the uncertainty of the single number rating determined according to EN 1793-1.
Furthermore, the use of uncertainties in reporting measured or weighted sound absorption coefficients
is explained.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
measurand
quantity intended to be measured
EXAMPLE The sound absorption coefficient of a particular test specimen measured according to ISO 354.
[SOURCE: ISO/IEC Guide 99:2007, 2.3, modified — The Notes to entry have been deleted and the
example has been added.]
3.2
measurement result
value attributed to a measurand (3.1), obtained by following the complete set of instructions given in a
measurement procedure
Note 1 to entry: The measurement result is the sound absorption coefficient in one-third octave bands according
to the procedure of ISO 354 or a (single number) value according to a rating procedure of EN 1793-1 or ISO 11654.
ISO 12999-2:2020(E)
[SOURCE: ISO 12999-1:2014, 3.2, modified — Note 1 to entry has been changed.]
3.3
uncertainty
parameter, associated with the result of a measurement, that characterizes the dispersion of the values
that can reasonably be attributed to the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.