CEN ISO/TS 21003-7:2008/A1:2010
(Amendment)Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity - Amendment 1 (ISO/TS 21003-7:2008/Amd 1:2010)
Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity - Amendment 1 (ISO/TS 21003-7:2008/Amd 1:2010)
This Technical Specification is applicable, in conjunction with the other parts of ISO 21003 (see Foreword), to multilayer piping systems intended to be used for hot and cold water installations inside buildings for the conveyance of water - whether or not the water is intended for human consumption (domestic systems) or for heating systems - under specified design pressures and temperatures appropriate to the class of application (see Table 1 of ISO 21003-1:2008). It gives guidance for the assessment of conformity, to be included in the manufacturer's quality plan as part of the quality system. It includes: - requirements for materials, components, joints and assemblies given in the applicable part(s) of ISO 21003; - requirements for the manufacturer's quality system (e.g. ISO 9001 [2]); - definitions and procedures to be used if third-party
Mehrschichtverbund-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation innerhalb von Gebäuden - Teil 7: Empfehlungen für die Beurteilung der Konformität - Änderung 1 (ISO/TS 21003-7:2008/Amd 1:2010)
Systèmes de canalisations multicouches pour installations d'eau chaude et froide à l'intérieur des bâtiments - Partie 7: Guide pour l'évaluation de la conformité - Amendement 1 (ISO/TS 21003-7:2008/Amd 1:2010)
Večslojni cevni sistemi za napeljave z vročo in hladno vodo v stavbah - 7. del: Navodilo za ugotavljanje skladnosti - Dopolnilo 1 (ISO/TS 21003-7:2008/Amd 1:2010)
Ta tehnična specifikacija velja skupaj z drugimi deli ISO 21003 (glej Pregovor) za večslojne cevne sisteme, namenjeni za napeljave z vročo in hladno vodo v stavbah za prenašanje vode — ne glede na to, ali je voda namenjena za prehrano ljudi (domači sistemi) ali za sisteme ogrevanja – pod določenimi računskimi tlaki in temperaturami, primernimi za razred uporabe (glej preglednico 1 iz ISO 21003-1:2008). Podaja navodilo za ugotavljanje skladnosti, ki bo vključeno v načrt kakovosti proizvajalca kot del sistema kakovosti. Vključuje: - zahteve za materiale, sestavne dele, spoje in sklope, podane v tistih delih ISO 21003, ki se uporabljajo; - zahteve za sistem kakovosti proizvajalca (npr. ISO 9001 [2]); - definicije in postopke, ki se uporabljajo, če je vključeno certificiranje s strani tretje stranke.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2010
9HþVORMQLFHYQLVLVWHPL]DQDSHOMDYH]YURþRLQKODGQRYRGRYVWDYEDKGHO
1DYRGLOR]DXJRWDYOMDQMHVNODGQRVWL'RSROQLOR ,6276 $PG
Multilayer piping systems for hot and cold water installations inside buildings - Part 7:
Guidance for the assessment of conformity - Amendment 1 (ISO/TS 21003-7:2008/Amd
1:2010)
Mehrschichtverbund-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation
innerhalb von Gebäuden - Teil 7: Empfehlungen für die Beurteilung der Konformität -
Änderung 1 (ISOTS 21003-7:2008/Amd 1:2010)
Systèmes de canalisations multicouches pour installations d'eau chaude et froide à
l'intérieur des bâtiments - Partie 7: Guide pour l'évaluation de la conformité -
Amendement 1 (ISO/TS 21003-7:2008/Amd 1:2010)
Ta slovenski standard je istoveten z: CEN ISO/TS 21003-7:2008/A1:2010
ICS:
23.040.01 Deli cevovodov in cevovodi Pipeline components and
na splošno pipelines in general
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST-TS CEN ISO/TS 21003- en
7:2009/A1:2010
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL SPECIFICATION
CEN ISO/TS 21003-
7:2008/A1
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
September 2010
ICS 23.040.20; 91.140.60
English Version
Multilayer piping systems for hot and cold water installations
inside buildings - Part 7: Guidance for the assessment of
conformity - Amendment 1 (ISO/TS 21003-7:2008/Amd 1:2010)
Systèmes de canalisations multicouches pour installations Mehrschichtverbund-Rohrleitungssysteme für die Warm-
d'eau chaude et froide à l'intérieur des bâtiments - Partie 7: und Kaltwasserinstallation innerhalb von Gebäuden - Teil 7:
Guide pour l'évaluation de la conformité - Amendement 1 Empfehlungen für die Beurteilung der Konformität -
(ISO/TS 21003-7:2008/Amd 1:2010) Änderung 1 (ISO/TS 21003-7:2008/Amd 1:2010)
This Technical Specification (CEN/TS) was approved by CEN on 23 August 2010 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 21003-7:2008/A1:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (CEN ISO/TS 21003-7:2008/A1:2010) has been prepared by Technical Committee ISO/TC
138 "Plastics pipes, fittings and valves for the transport of fluids" in collaboration with Technical Committee
CEN/TC 155 “Plastics piping systems and ducting systems” the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO/TS 21003-7:2008/Amd 1:2010 has been approved by CEN as a CEN ISO/TS 21003-
7:2008/A1:2010 without any modification.
TECHNICAL ISO/TS
SPECIFICATION 21003-7
First edition
2008-07-01
AMENDMENT 1
2010-09-01
Multilayer piping systems for hot and
cold water installations inside
buildings —
Part 7:
Guidance for the assessment of
conformity
AMENDMENT 1
Systèmes de canalisations multicouches pour installations d'eau
chaude et froide à l'intérieur des bâtiments —
Partie 7: Guide pour l'évaluation de la conformité
AMENDEMENT 1
Reference number
ISO/TS 21003-7:2008/Amd.1:2010(E)
©
ISO 2010
SIST-TS CEN ISO/TS 21003-7:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.