EN 7010:2020

Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners

This document is the configuration master for the content and structure of externally threaded fastener product standards.
This document
- defines the content of externally threaded fastener product standards;
- is referenced in product standards;
- defines part numbering and title.
This configuration master defines externally threaded fasteners, metric and inch series.

Luft- und Raumfahrt - Konfiguration - Definition und Bezeichnung für Produktnormen von Verbindungselementen mit Außengewinde

Dieses Dokument ist das Konfigurations-Hauptdokument für den Inhalt und die Struktur von Produkt-normen für Verbindungselemente mit Außengewinde.
Dieses Dokument
- legt den Inhalt von Produktnormen für Verbindungselemente mit Außengewinde fest,
- wird in Produktnormen in Bezug genommen und
- legt Teilnummerierung und Titel fest.
Dieses Konfigurations-Hauptdokument legt die metrischen und zölligen Reihen für Verbindungselemente mit Außengewinde fest.

Série aérospatiale - Configuration - Définition et désignation des normes de produits d'éléments de fixation à filetage extérieur

Le présent document constitue la matrice de configuration pour le contenu et la structure des normes de produits d’éléments de fixation à filetage extérieur.
Ce document :
- définit le contenu des normes de produits d’éléments de fixation à filetage extérieur ;
- est cité comme référence dans des normes de produits ;
- définit la numérotation des parties et leur titre.
Cette matrice de configuration définit les éléments de fixation à filetage extérieur, séries métrique et en inches.

Aeronavtika - Konfiguracija - Opredelitev in označevanje standardov za proizvode z zunanjim navojem

General Information

• Status: Published
• Publication Date: 12-May-2020
• Withdrawal Date: 29-Nov-2020
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-May-2020
• Completion Date: 13-May-2020
• Ref Project: SIST EN 7010:2020 - Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 7010:2020
01-julij-2020
Aeronavtika - Konfiguracija - Opredelitev in označevanje standardov za proizvode
z zunanjim navojem
Aerospace series - Configuration - Definition and designation for product standards for
externally threaded fasteners
Luft- und Raumfahrt - Konfiguration - Definition und Bezeichnung für Produktnormen von
Verbindungselementen mit Außengewinde
Série aérospatiale - Configuration - Définition et désignation des normes de produits
d'éléments de fixation à filetage extérieur
Ta slovenski standard je istoveten z: EN 7010:2020
ICS:
49.030.01 Vezni elementi na splošno Fasteners in general
SIST EN 7010:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 7010:2020

---------------------- Page: 2 ----------------------
SIST EN 7010:2020


EN 7010
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2020
EUROPÄISCHE NORM
ICS 49.030.20
English Version

Aerospace series - Configuration - Definition and
designation for product standards for externally threaded
fasteners
Série aérospatiale - Configuration - Définition et Luft- und Raumfahrt - Konfiguration - Definition und
désignation des normes de produits d'éléments de Bezeichnung für Produktnormen von
fixation à filetage extérieur Verbindungselementen mit Außengewinde
This European Standard was approved by CEN on 14 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 7010:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 7010:2020
EN 7010:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 11
4 Configuration . 11
4.1 Configuration of countersunk head styles . 11
4.2 Tolerance of the shank . 12
4.3 Strength class . 13
5 Designation. 14
5.1 EN standard identity block codification. 14
5.2 Definition of product standard title . 14
6 Requirements . 15
6.1 Tolerances of form and position .
...