EN 7010:2020

Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners

This document is the configuration master for the content and structure of externally threaded fastener product standards.
This document
- defines the content of externally threaded fastener product standards;
- is referenced in product standards;
- defines part numbering and title.
This configuration master defines externally threaded fasteners, metric and inch series.

Luft- und Raumfahrt - Konfiguration - Definition und Bezeichnung für Produktnormen von Verbindungselementen mit Außengewinde

Dieses Dokument ist das Konfigurations-Hauptdokument für den Inhalt und die Struktur von Produkt-normen für Verbindungselemente mit Außengewinde.
Dieses Dokument
- legt den Inhalt von Produktnormen für Verbindungselemente mit Außengewinde fest,
- wird in Produktnormen in Bezug genommen und
- legt Teilnummerierung und Titel fest.
Dieses Konfigurations-Hauptdokument legt die metrischen und zölligen Reihen für Verbindungselemente mit Außengewinde fest.

Série aérospatiale - Configuration - Définition et désignation des normes de produits d'éléments de fixation à filetage extérieur

Le présent document constitue la matrice de configuration pour le contenu et la structure des normes de produits d’éléments de fixation à filetage extérieur.
Ce document :
- définit le contenu des normes de produits d’éléments de fixation à filetage extérieur ;
- est cité comme référence dans des normes de produits ;
- définit la numérotation des parties et leur titre.
Cette matrice de configuration définit les éléments de fixation à filetage extérieur, séries métrique et en inches.

Aeronavtika - Konfiguracija - Opredelitev in označevanje standardov za proizvode z zunanjim navojem

General Information

• Status: Published
• Publication Date: 12-May-2020
• Withdrawal Date: 29-Nov-2020
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3/S 2 - Fasteners
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-May-2020
• Completion Date: 13-May-2020
• Ref Project: SIST EN 7010:2020 - Aerospace series - Configuration - Definition and designation for product standards for externally threaded fasteners

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2020
Aeronavtika - Konfiguracija - Opredelitev in označevanje standardov za proizvode
z zunanjim navojem
Aerospace series - Configuration - Definition and designation for product standards for
externally threaded fasteners
Luft- und Raumfahrt - Konfiguration - Definition und Bezeichnung für Produktnormen von
Verbindungselementen mit Außengewinde
Série aérospatiale - Configuration - Définition et désignation des normes de produits
d'éléments de fixation à filetage extérieur
Ta slovenski standard je istoveten z: EN 7010:2020
ICS:
49.030.01 Vezni elementi na splošno Fasteners in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 7010
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2020
EUROPÄISCHE NORM
ICS 49.030.20
English Version
Aerospace series - Configuration - Definition and
designation for product standards for externally threaded
fasteners
Série aérospatiale - Configuration - Définition et Luft- und Raumfahrt - Konfiguration - Definition und
désignation des normes de produits d'éléments de Bezeichnung für Produktnormen von
fixation à filetage extérieur Verbindungselementen mit Außengewinde
This European Standard was approved by CEN on 14 July 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 7010:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 11
4 Configuration . 11
4.1 Configuration of countersunk head styles . 11
4.2 Tolerance of the shank . 12
4.3 Strength class . 13
5 Designation. 14
5.1 EN standard identity block codification. 14
5.2 Definition of product standard title . 14
6 Requirements . 15
6.1 Tolerances of form and position . 15
6.2 Material . 16
6.3 Surface treatment and lubricant . 21
6.4 Mass . 25
6.5 Type of shank . 25
6.6 Type of head . 26
6.7 Type of thread and options . 29
6.8 Diameter and length codes . 29
6.8.1 Metric system . 30
6.8.2 Imperial system . 32
6.9 Marking . 35
6.9.1 Procedure. 36
6.9.2 Legibility . 36
6.9.3 Position / orientation . 36
6.10 Statistical Process Control (SPC) . 36
7 Technical specification and qualification. 37
Annex A (informative) Link between standards and technical specifications . 38
Bibliography . 39

European foreword
This document (EN 7010:2020) has been prepared by the Aerospace and Defence Industries
Association of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2020, and conflicting national standards
shall be withdrawn at the latest by November 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
1 Scope
This document is the configuration master for the content and structure of externally threaded fastener
product standards.
This document
— defines the content of externally threaded fastener product standards;
— is referenced in product standards;
— defines part numbering and title.
This configuration master defines externally threaded fasteners, metric and inch series.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2133, Aerospace series — Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa,
copper, copper alloys and nickel alloys
EN 2137, Aerospace series — Steel FE-PL75 — 1 100 MPa ≤ R ≤ 1 250 MPa — Bars — D ≤ 100 mm
m e
EN 2205, Aerospace series — Steel FE-PL1502 (25CrMo4) — 900 MPa ≤ R ≤ 1 100 MPa — Bars —
m
D ≤ 40 mm
e
EN 2304, Aerospace series — Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) — Solution treated
and precipitation treated — Forgings — D ≤ 100 mm — R ≥ 960 MPa
e m
EN 2398, Aerospace series — Heat resisting steel FE-PA2601 (X6NiCrTiMoV26-15) — R ≥ 900 MPa —
m
Bars for machined bolts — D ≤ 25 mm
EN 2399, Aerospace series — Heat resisting steel FE-PA2601 (X4NiCrTiMoV26-15) — R ≥ 900 MPa —
m
Bars for forged bolts — D ≤ 25 mm
EN 2438, Aerospace series — Steel FE-PL2102 (35NiCr6) — 900 MPa ≤ R ≤ 1 100 MPa — Bars —
m
D ≤ 40 mm
e
EN 2439, Aerospace series — Steel FE-PL2102 (35NiCr6) — 900 MPa ≤ R ≤ 1 100 MPa — Forgings —
m
D ≤ 40 mm
e
EN 2446, Aerospace series — Steel FE-PL1503 (35CrMo4) — 1 100 MPa ≤ R ≤ 1 300 MPa — Bars —
m
D ≤ 25 mm
e
Published as ASD-STAN Prestandard at the date of publication of this standard by AeroSpace and Defence
Industries Association of Europe – Standardization (ASD-STAN) (www.asd-stan.org).
EN 2448, Aerospace series — Steel FE-PL1503 (35CrMo4) — 900 MPa ≤ R ≤ 1 100 MPa — Bars —
m
D ≤ 40 mm
e
EN 2475, Aerospace series — Steel 30CrNiMo8 (1.6580) — Air melted hardened and tempered — Bar for
machining — D ≤ 100 mm — 1 100 MPa ≤ R ≤ 1 300 MPa
e m
EN 2478, Aerospace series — Steel FE-PL2107 (30NiCrMo16) — 1 220 MPa ≤ R ≤ 1 370 MPa — Bars —
m
D ≤ 40 mm
e
EN 2480, Aerospace series — Steel FE-PL2108 (36NiCrMo16) — 1 250 MPa ≤ R ≤ 1 400 MPa — Bars —
m
D ≤ 75 mm
e
EN 2481, Aerospace series — Steel FE-PL2108 (36NiCrMo16) — 1 250 MPa ≤ R ≤ 1 400 MPa —
m
Forgings — D ≤ 75 mm
e
EN 2482, Aerospace series — Steel FE-PL2108 (36NiCrMo16) — 1 100 MPa ≤ R ≤ 1 300 MPa — Bars —
m
D ≤ 100 mm
e
EN 2483, Aerospace series — Steel FE-PL2108 (36NiCrMo16) — 1 100 MPa ≤ R ≤ 1 300 MPa —
m
Forgings — D ≤ 100 mm
e
EN 2491, Aerospace series — Molybdenum disulphide dry lubricants — Coating methods
EN 2516, Aerospace series — Passivation of corrosion resistant steels and decontamination of nickel base
alloys
EN 2786, Aerospace series — Electrolytic silver plating of fasteners
EN 2808, Aerospace series — Anodizing of titanium and titanium alloys
EN 2952, Aerospace series — Heat resisting alloy NI-PH2601, Solution treated and cold worked — Bar for
forged fasteners D ≤ 50 mm — 1 270 MPa ≤ R ≤ 1 550 MPa
m
EN 2961, Aerospace series — Heat resisting alloy NI-PH2601 — Solution treated — Bar for machined
fasteners — D ≤ 50 mm — R ≥ 1 270 MPa
m
EN 3219, Aerospace series — Heat resisting nickel base alloy (Ni-P100 HT) — Cold worked and
softened — Bar and wire for continuous forging or extrusion for fasteners — 3 mm ≤ D ≤ 30 mm
EN 3330, Aerospace series — Steel FE-PL1503 (35CrMo4) — Annealed — Bar and wire — D ≤ 40 mm —
e
For prevailing torque nuts
EN 3513, Aerospace series — Steel FE-PL711 — Hardened and tempered — 900 ≤ R ≤ 1 100 MPa —
m
Bar and wire — D ≤ 45 mm
e
EN 3514, Aerospace series — Steel FE-PL711 — Hardened and tempered — 1 100 ≤ R ≤ 1 300 MPa —
m
Bar and wire for bolts — D ≤ 25 mm
e
EN 3639, Aerospace series — Heat resisting alloy FE-PA2601 — Softened and cold worked — Wire for
forged fasteners — D ≤ 15 mm — 900 MPa ≤ R ≤ 1 100 MPa
m
EN 3666, Aerospace series — Heat resisting alloy NI-PH2601 — Solution treated and cold worked —
Bar for forged fasteners — D ≤ 50 mm — 1 550 MPa ≤ R ≤ 1 830 MPa
m
EN 3761, Aerospace series — Heat resisting alloy FE-PA2601 — Softened and cold worked — Bar for
forged fasteners — D ≤ 50 mm — 1 100 MPa ≤ R ≤ 1 300 MPa
m
EN 3813, Aerospace series — Titanium alloy TI-P64001 (Ti-6Al-4V) — Annealed — Bar and wire for
forged fasteners — D ≤ 50 mm
e
EN 3833, Aerospace series — Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601
(Inconel 718), passivated — Classification: 1 550 MPa (at ambient temperature) / 650 °C — Technical
specification
EN 3911, Aerospace series — Six lobe recess — Geometrical definition
EN 4315, Aerospace series — Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) — Solution treated
and precipitation treated, bar and section a or D ≤ 100 mm, R ≥ 900 MPa
m
EN 4317, Aerospace series — Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) — Non heat treated,
forging stock a or D ≤ 200 mm
EN 4318, Aerospace series — Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) — Solution treated
and p
...