EN 13203-4:2016
(Main)Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity
Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity
This European Standard is applicable to gas-fired mCHP appliances producing domestic hot water and electricity. The electricity is generated in a process linked to the production of useful heat.
It applies to a mCHP appliances marketed as single unit or as a package fully specified by a manufacturer that have:
- a gas heat input not exceeding 70 kW;
- an electrical output not exceeding 50 kW and
- a hot water storage capacity not exceeding 500 l.
EN 13203 1 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a variety of uses. It also gives a system for presenting the information to the user.
The present document sets out a method for assessing the energy performance of gas fired mCHP appliances. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user.
When the mCHP generator does not supply domestic hot water in the summer period, the present standard is not applicable. EN 13203 2 will be used for performance assessment of these generators.
Gasbeheizte Geräte für die sanitäre Warmwasserbereitung für den Hausgebrauch - Teil 4: Bewertung des Energieverbrauchs von Gasgeräten mit Kraft-Wärme-Kopplung (Mikro-KWK) zur Warmwasserbereitung und Stromerzeugung
Diese Europäische Norm ist anwendbar auf gasbefeuerte Geräte mit Mikro-Kraft-Wärme-Kopplung (µKWK-Geräte), die häusliches sanitäres Warmwasser und elektrische Energie bereitstellen. Die elektrische Energie wird in einem Prozess erzeugt, der mit der Bereitstellung von Nutzwärme verbunden ist.
Sie ist anzuwenden auf µKWK-Geräte, die als Einheit vermarktet werden oder für Systeme, die von einem Hersteller umfassend beschrieben sind und:
- eine Gaswärmebelastung von 70 kW nicht überschreiten,
- eine elektrische Leistung von 50 kW nicht überschreiten und
- ein Warmwasserspeichervolumen von 500 l nicht überschreiten.
EN 13203 1 legt mehrere qualitative und quantitative Leistungsstufen für die sanitäre Warmwasserbereitung für eine Auswahl von Benutzungsarten fest. Sie enthält ebenfalls ein System zur Bereitstellung von Angaben für den Betreiber.
Das vorliegende Dokument legt ein Verfahren zur Bewertung des Energieverhaltens der gasbefeuerten µKWK-Geräte fest. Es definiert eine Anzahl täglicher Zapfprogramme für die häusliche Warmwasser¬verwendung in der Küche, zum Duschen und Baden und für Kombinationen dieser Verwendungsarten und legt die entsprechenden Prüfverfahren fest, die den Vergleich des Energieverhaltens unterschiedlicher gasbe¬feuerter Geräte ermöglichen und auf die Bedürfnisse des Benutzers ausgerichtet sind.
Wenn der µKWK-Generator im Sommer kein sanitäres Warmwasser liefert, ist die vorliegende Norm nicht anwendbar. Zur Bewertung der Leistung dieser Generatoren wird die EN 13203-2 angewendet.
Appareils domestiques produisant de l'eau chaude sanitaire utilisant les combustibles gazeux - Evaluation de la consommation énergétique des appareils à gaz de production combinée de chaleur et d'électricité (mCHP) produisant de l'eau chaude et de l'électricité
Plinske gospodinjske naprave za pripravo tople sanitarne vode - 4. del: Ocenjevanje rabe energije plinskih naprav za soproizvodnjo tople vode in elektrike (mCHP)
Ta evropski standard se uporablja za plinske naprave za soproizvodnjo tople vode in elektrike (mCHP). Električna energija se proizvaja v procesu, povezanim s proizvodnjo uporabne toplote.
Uporablja se za vse naprave mCHP, ki so na trgu na voljo kot ena enota ali kot paket in pri katerih po navedbah proizvajalca:
– toplotna moč plina ne presega 70 kW;
– električna moč ne presega 50 kW in
– prostornina za vročo vodo ne presega 500 l.
Standard EN 13203 1 v kakovostnem in količinskem smislu določa zmogljivost za pripravo tople sanitarne vode za različne namene. Zajema tudi sistem za predstavitev informacij uporabniku.
Ta dokument določa metodo za ocenjevanje energetske učinkovitosti plinskih naprav mCHP. Določa število dnevnih ciklov izpuščanja za vsako uporabo gospodinjske tople vode, kuhinjo, prho, kad in njihove kombinacije, skupaj z ustreznimi preskusnimi postopki, za omogočanje energijske zmogljivosti različnih plinskih naprav za primerjavo in uskladitev s potrebami uporabnika.
Ko generator mCHP ne dobavlja tople sanitarne vode v poletnem obdobju, se trenutni standard ne uporablja. Za oceno zmogljivosti takšnih generatorjev se bo uporabljal standard EN 13203 2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-april-2017
Plinske gospodinjske naprave za pripravo tople sanitarne vode - 4. del:
Ocenjevanje porabe energije plinskih naprav za soproizvodnjo tople vode in
elektrike (mCHP)
Gas-fired domestic appliances producing hot water - Part 4: Assessment of energy
consumption of gas combined heat and power appliances (mCHP) producing hot water
and electricity
Gasbeheizte Geräte für die sanitäre Warmwasserbereitung für den Hausgebrauch - Teil
4: Bewertung des Energieverbrauchs von Gasgeräten mit Kraft-Wärme-Kopplung (Mikro-
KWK) zur Warmwasserbereitung und Stromerzeugung
Appareils domestiques produisant de l'eau chaude sanitaire utilisant les combustibles
gazeux - Partie 4: Évaluation de la consommation énergétique des appareils à gaz de
production combinée de chaleur et d'électricité (mCHP) produisant de l'eau chaude et de
l'électricité
Ta slovenski standard je istoveten z: EN 13203-4:2016
ICS:
91.140.65 Oprema za ogrevanje vode Water heating equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13203-4
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2016
EUROPÄISCHE NORM
ICS 91.140.65
English Version
Gas-fired domestic appliances producing hot water - Part
4: Assessment of energy consumption of gas combined
heat and power appliances (mCHP) producing hot water
and electricity
Appareils domestiques produisant de l'eau chaude Gasbeheizte Geräte für die sanitäre
sanitaire utilisant les combustibles gazeux - Partie 4: Warmwasserbereitung für den Hausgebrauch - Teil 4:
Évaluation de la consommation énergétique des Bewertung des Energieverbrauchs von Gasgeräten mit
appareils à gaz de production combinée de chaleur et Kraft-Wärme-Kopplung (Mikro-KWK) zur
d'électricité (mCHP) produisant de l'eau chaude et de Warmwasserbereitung und Stromerzeugung
l'électricité
This European Standard was approved by CEN on 6 August 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13203-4:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General test conditions . 8
4.1 Reference conditions . 8
4.2 Measurement uncertainties . 8
4.3 Test conditions . 9
4.3.1 General . 9
4.3.2 Test room . 9
4.3.3 Water supply . 9
4.3.4 Steady-state . 9
4.3.5 Initial adjustment of the appliance . 9
4.3.6 Electrical supply . 10
4.3.7 Delivered electrical energy . 10
5 Determination of the energy consumption and electrical energy generation of the
appliance . 10
5.1 General . 10
5.2 Tapping cycles . 10
Table 1 – Load profile S . 12
Table 2 – Load profile M . 13
Table 3 – Load profile L . 14
Table 4 – Load profile XL . 15
Table 5 – Load profile XXL . 16
Table 6 – Load profile 3XL . 17
Table 7 – Load profile 4XL . 18
5.3 Measurement of the energy recovered by the useful water . 19
5.4 Calculation of gas energy . 19
5.4.1 Calculation of the daily gas energy consumption in summer mode . 19
5.4.2 Calculation of daily gas energy consumption in winter mode . 20
5.4.3 Daily gas energy consumption seasonally weighted . 20
5.5 Calculation of electrical energy . 21
5.5.1 Calculation of the delivered electrical energy . 21
Figure 1 – Electrical measurements – Test points . 21
5.5.2 Calculation of the produced electrical energy . 23
5.5.3 Calculation of electrical auxiliary energy . 24
5.6 Measurement of energy consumption and production in standby mode . 24
5.6.1 General . 24
5.6.2 Calculation of daily gas energy consumption in standby mode . 24
5.6.3 Calculation of daily auxiliary energy in standby mode . 25
5.7 Measurement of auxiliaries consumption in off mode . 26
6 Determination of the wasted water . 26
7 Eco design Related Product Data . 27
7.1 Water heating energy efficiency. 27
7.2 Annual fuel consumption (AFC) . 28
7.3 Annual electricity delivery (AED) . 28
Annex A (informative) Examples of test conditions . 30
A.1 Diagrams of test conditions . 30
Figure A.1 —Initial adjustment of the appliance with storage tank maintained in
temperature. 30
Figure A.2 —Initial adjustment of the appliance without storage tank maintained in
temperature. 31
Figure A.3 – Tapping cycle – Test cycle for measurement of the energy consumption of the
appliance with storage tank maintained in temperature . 32
Figure A.4 – Standby mode with control cycles . 33
Annex B (informative) Test rig and measurement devices . 34
B.1 General . 34
Figure B.1 – Example of test rig . 34
B.2 Pressure measurement . 35
Figure B.2 — Example of pressure measurement device . 35
B.3 Temperature measurement . 35
Figure B.3 — Example of temperature measurement device . 36
Figure B.4 — Example of position of thermocouples - Method of surfaces . 37
Figure B.5 — Useful and delivered flow rates and temperatures . 38
Annex C (normative) Test points . 39
Figure C.1 – Thermal performances for mCHP systems with combined storage tank for
central heating and domestic hot water – Test points . 39
Figure C.2 – Thermal performances for mCHP systems with storage tank for domestic hot
water only – Test points . 40
Annex ZA (informative) Relationship between this European Standard and the
requirements of Commission Regulation (EC) n° 814/2013 . 41
Table ZA.1 — Correspondence between this European Standard and Commission
Regulation (EC) n° 814/2013 . 41
Annex ZB (informative) Relationship between this European Standard and the
requirements of Commission Regulation n° 812/2013 . 42
Table ZB.1 — Correspondence between this European Standard and Commission
Regulation (EC) n° 812/2013 . 42
Annex ZC (informative) Relationship between this European Standard and the
requirements of Commission Regulation (EU) n° 813/2013 . 43
Table ZC.1 — Correspondence between this European Standard and Commission
Regulation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.