Rubber hoses, textile-reinforced, for compressed air - Specification (ISO/DIS 2398:2023)

This document specifies the requirements for three types, three classes and two categories of textile-reinforced rubber hose for compressed air, up to a maximum working pressure of 2,5 MPa (25 bar) with an operating-temperature range of −40 °C to +70 °C, depending on the type and category.

Gummischläuche mit Textileinlage für Druckluft - Anforderung (ISO/DIS 2398:2023)

Tuyaux en caoutchouc renforcés textile pour l'air comprimé - Spécifications (ISO/DIS 2398:2023)

Le présent document spécifie les exigences pour trois types, trois classes et deux catégories de tuyaux en caoutchouc renforcés textile pour l'air comprimé, pouvant être utilisés jusqu'à une pression maximale de service de 2,5 MPa (25 bar) et sur une plage de températures de service de −40 °C à +70 °C, en fonction du type et de la catégorie.

S tekstilom ojačene gumene cevi za stisnjeni zrak - Specifikacija (ISO/DIS 2398:2023)

General Information

Status
Not Published
Publication Date
15-Sep-2024
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
11-May-2023
Completion Date
11-May-2023

Relations

Buy Standard

Draft
prEN ISO 2398:2023
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 2398:2023
01-april-2023
Nadomešča:
SIST EN ISO 2398:2017
S tekstilom ojačene gumene cevi za stisnjeni zrak - Specifikacija (ISO/DIS
2398:2023)
Rubber hoses, textile-reinforced, for compressed air - Specification (ISO/DIS 2398:2023)
Gummischläuche mit Textileinlage für Druckluft - Anforderung (ISO/DIS 2398:2023)
Tuyaux en caoutchouc renforcés textile pour l'air comprimé - Spécifications (ISO/DIS
2398:2023)
Ta slovenski standard je istoveten z: prEN ISO 2398
ICS:
83.140.40 Gumene cevi Hoses
oSIST prEN ISO 2398:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 2398:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 2398:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2398
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-02-16 2023-05-11
Rubber hoses, textile-reinforced, for compressed air —
Specification
Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 2398:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 2398:2023
ISO/DIS 2398:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 2398
ISO/TC 45/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:

Rubber hoses, textile-reinforced, for compressed air —
Specification
Tuyaux en caoutchouc renforcés textile pour l'air comprimé — Spécifications
ICS: 23.040.70
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 2398:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 2398:2023
ISO/DIS 2398:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.