Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)

This document defines terms used in the hose industry.
Recommended terminology for electrical conductivity and resistance of rubber and plastics hoses and hose assemblies can be found in ISO 8031:2020, Annex A.

Gummi- und Kunststoffschläuche und -schlauchleitungen - Begriffe (ISO 8330:2022)

Dieses Dokument legt Definitionen zu Begriffen fest, die in der Schlauchindustrie verwendet werden.
Empfohlene Terminologie zur elektrischen Leitfähigkeit und Widerstand von Gummi- und Kunststoffschläuchen und  schlauchleitungen ist in ISO 8031:2020, Anhang A, zu finden.

Tuyaux et flexibles en caoutchouc et en plastiques - Vocabulaire (ISO 8330:2022)

Le présent document définit les termes utilisés dans l’industrie des tuyaux.
La terminologie recommandée pour la conductivité électrique et la résistance électrique des tuyaux et flexibles en caoutchouc et en plastique se trouvent dans l’ISO 8031:2020, Annexe A.

Gumene in polimerne cevi ter cevni priključki - Slovar (ISO 8330:2022)

Ta dokument določa izraze, ki se uporabljajo v industriji cevi.
Priporočena terminologija za električno prevodnost oziroma odpornost gumijastih in polimernih cevi ter cevnih priključkov je na voljo v dodatku A standarda ISO 8031:2020.

General Information

Status
Published
Publication Date
12-Apr-2022
Withdrawal Date
30-Oct-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
13-Apr-2022
Completion Date
13-Apr-2022

Relations

Buy Standard

Standard
EN ISO 8330:2022
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN ISO 8330:2014
Gumene in polimerne cevi ter cevni priključki - Slovar (ISO 8330:2022)
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
Gummi- und Kunststoffschläuche und -schlauchleitungen - Vokabular (ISO 8330:2022)
Tuyaux et flexibles en caoutchouc et en plastiques - Vocabulaire (ISO 8330:2022)
Ta slovenski standard je istoveten z: EN ISO 8330:2022
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.040.70 Gumene cevi in armature Hoses and hose assemblies
83.140.40 Gumene cevi Hoses
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8330
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 01.040.23; 23.040.70 Supersedes EN ISO 8330:2014
English Version
Rubber and plastics hoses and hose assemblies -
Vocabulary (ISO 8330:2022)
Tuyaux et flexibles en caoutchouc et en plastiques - Gummi- und Kunststoffschläuche und -
Vocabulaire (ISO 8330:2022) schlauchleitungen - Vokabular (ISO 8330:2022)
This European Standard was approved by CEN on 24 March 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8330:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 8330:2022) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses
and hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8330:2014.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 8330:2022 has been approved by CEN as EN ISO 8330:2022 without any modification.

INTERNATIONAL ISO
STANDARD 8330
Fourth edition
2022-03
Rubber and plastics hoses and hose
assemblies — Vocabulary
Tuyaux et flexibles en caoutchouc et en plastiques — Vocabulaire
Reference number
ISO 8330:2022(E)
ISO 8330:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 8330:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General . 1
3.2 Hose types . 2
3.2.1 Hose types based on shape and properties . 2
3.2.2 Hose types based on reinforcement and other components . 3
3.2.3 Hose types based on production method . 3
3.2.4 Hose types based on material . 4
3.3 Hose parts and components other than the reinforcement and end . 4
3.4 Hose reinforcement parts and components . 5
3.5 Hose end types. 7
3.6 Hose assembly terms . 8
3.6.1 General hose assembly terms . 8
3.6.2 Connections . 9
3.6.3 Types of fittings . 9
3.6.4 Parts of hose fittings, couplings and other components . 10
3.6.5 Methods of assembling . 11
3.7 Sizes and geometrical properties of hoses and hose assemblies .12
3.7.1 Sizes .12
3.7.2 Bending dimensions .12
3.7.3 Reinforcement angles and spacing . 13
3.8 Mechanical properties . 13
3.9 Electrical aspects . 16
3.10 Hose production methods and tools . 17
3.11 Hose tests and operation conditions . . 18
3.12 Hose and hose assembly deformations and defects . 19
Bibliography .21
Index .22
iii
ISO 8330:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 45, Rubber and rubber products,
Subcommittee SC 1, Rubber and plastics hoses and hose assemblies, in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 218, Rubber and plastics hoses and
hose assemblies, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
This fourth edition cancels and replaces the third edition (ISO 8330:2014), which has been technically
revised.
The main changes are as follows:
— the structure of the document is now divided into subclauses as follows:
— General 3.1;
— Hose types 3.2;
— Hose parts and components other than the reinforcement and end 3.3;
— Hose reinforcement parts and components 3.4;
— Hose end types 3.5;
— Hose assembly terms 3.6;
— Sizes and geometrical properties of hoses and hose assemblies 3.7;
— Mechanical properties 3.8;
— Hose production methods and tools 3.10;
— Hose tests and operation conditions 3.11;
iv
ISO 8330:2022(E)
— Hose and hose assembly deformations and defects 3.12;
— the numbering and order of the terms has been revised;
— alphabetical index has been added;
— the following terms have been added:
— barb;
— burst;
— cure (with vu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.