EN 14420-2:2022

Hose fittings with clamp units - Part 2: Hose side parts of hose tail

This document specifies requirements for the hose tail of hose fittings according to EN 14420-1 for use with clamp units according to EN 14420-3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8.
Maximum working pressure is 25 bar ; maximum working temperature is 65 °C.

Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile

Dieses Dokument legt Anforderungen an den schlauchseitigen Stutzenteil von Schlaucharmaturen nach EN 14420-1 zur Verwendung mit Klemmfassungen nach EN 14420-3 fest. Darüber hinaus legt es Werkstoffe für Schlaucharmaturen mit Klemmfassungen nach EN 14420-4 bis EN 14420-8 fest.
Der höchstzulässige Arbeitsdruck beträgt 25 bar , die höchstzulässige Arbeitstemperatur beträgt 65 °C.

Raccords pour flexibles avec demi-coquille - Partie 2 : Douilles pour flexibles

Le présent document spécifie les exigences applicables aux douilles pour raccords pour flexibles conformes à l’EN 14420-1, destinées à être utilisées avec des demi-coquilles conformes à l’EN 14420-3. En outre, il spécifie les matériaux pour raccords pour flexibles avec demi-coquille conformes aux EN 14420-4 à EN 14420-8.
La pression de service maximale est de 25 bar  ; la température de service maximale est 65 °C.

Cevni fitingi z objemkami - 2. del: Stranski cevni nastavki

Ta evropski standard določa zahteve za cevne nastavke cevnih fitingov v skladu s standardom EN 14420-1 za uporabo z objemkami iz standarda EN 14420-3. Poleg tega določa materiale za cevne fitinge z objemkami v skladu s standardi od EN 14420-4 do EN 14420-8.
Največji delovni tlak je 25 barov; najvišja delovna temperatura je 65 °C.

General Information

• Status: Published
• Publication Date: 30-Aug-2022
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 31-Aug-2022
• Due Date: 06-May-2022
• Completion Date: 31-Aug-2022
• Ref Project: SIST EN 14420-2:2022 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail

Relations

• Replaces: EN 14420-2:2013 - Hose fittings with clamp units - Part 2: Hose side parts of hose tail
• Effective Date: 27-Nov-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14420-2:2022
01-oktober-2022
Nadomešča:
SIST EN 14420-2:2013
Cevni fitingi z objemkami - 2. del: Stranski cevni nastavki
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
Schlaucharmaturen mit Klemmfassungen - Teil 2: Schlauchseitige Stutzenteile
Raccords pour flexibles avec demi-coquille - Partie 2 : Douilles pour flexibles
Ta slovenski standard je istoveten z: EN 14420-2:2022
ICS:
23.040.60 Prirobnice, oglavki in spojni Flanges, couplings and joints
elementi
SIST EN 14420-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 14420-2:2022

---------------------- Page: 2 ----------------------
SIST EN 14420-2:2022


EN 14420-2
EUROPEAN STANDARD

NORME EUROPÉENNE

August 2022
EUROPÄISCHE NORM
ICS 23.040.70 Supersedes EN 14420-2:2013
English Version

Hose fittings with clamp units - Part 2: Hose side parts of
hose tail
Raccords pour flexibles avec demi-coquille - Partie 2 : Schlaucharmaturen mit Klemmfassungen - Teil 2:
Douilles pour flexibles Schlauchseitige Stutzenteile
This European Standard was approved by CEN on 24 July 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14420-2:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 14420-2:2022
EN 14420-2:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Dimensions . 5
5 Materials . 8
6 Marking . 9
7 Type testing and quality control . 9
Bibliography . 10

2

---------------------- Page: 4 ----------------------
SIST EN 14420-2:2022
EN 14420-2:2022 (E)
European foreword
This document (EN 14420-2:2022) has been prepared by Technical Committee CEN/TC 218 “Rubber and
plastics hoses and hose assemblies”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2023, and conflicting national standards shall
be withdrawn at the latest by February 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held respons
...