EN 13121-1:2021

GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria

This document gives requirements for specification and acceptance conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non-pressurised or pressurised, for use above ground.
Tanks and vessels for storage or processing of food, raw materials for food and potable water additionally have to be in compliance with relevant EU directives and applicable national standards and regulations.

Oberirdische GFK-Tanks und -Behälter - Teil 1: Ausgangsmaterialien - Spezifikations- und Abnahmebedingungen

Dieses Dokument enthält die Anforderungen an die Spezifikation und Annahme von Ausgangsmaterialien für GFK-Tanks und -Behälter mit oder ohne Auskleidung, werksmäßig hergestellt oder standortgefertigt, zur oberirdischen Lagerung oder Behandlung von Fluiden, drucklos oder druckbeaufschlagt. In Verbindung mit den Bedingungen für die Herstellung der drucktragenden Werkstoffe nach EN 13121 3:2016 stellen die Spezifikations- und Annahmebedingungen für die Ausgangsmaterialien sicher, dass der Tank oder Behälter geeignet ist, die Anforderungen an seine Auslegung zu erfüllen, insbesondere hinsichtlich der Anforderungen an seine chemisch/thermische Widerstandsfähigkeit sowie an die Aufnahme des Drucks und der Lasten.
ANMERKUNG Tanks und Behälter für die Lagerung oder Verarbeitung von Lebensmitteln, Rohmaterialien für Lebensmittel und Trinkwasser werden zusätzlich die Anforderungen der relevanten EG-Richtlinien und anzuwendenden nationalen Normen und Vorschriften erfüllen.

Réservoirs et récipients en PRV pour applications hors sol - Partie 1 : Matières premières - Conditions de spécification et critères d’acceptation

Le présent document définit les exigences relatives aux conditions de spécification et aux conditions de réception des matières premières destinées à la fabrication des réservoirs et récipients en PRV avec ou sans revêtement, destinés au stockage ou au traitement de fluides, fabriqués en usine ou sur site, avec ou sans pression, implantés hors sol.
NOTE   Les réservoirs et récipients pour le stockage ou le traitement de denrées alimentaires, de matières premières pour les denrées alimentaires et d’eau potable vont en outre être en conformité avec les Directives UE correspondantes et les normes nationales et réglementations applicables.

Nadzemni rezervoarji in posode iz umetnih mas, ojačanih s steklenimi vlakni - 1. del: Osnovni materiali - Specifikacije in kriteriji sprejemljivosti

General Information

• Status: Published
• Publication Date: 21-Sep-2021
• Withdrawal Date: 30-Mar-2022
• ICS: 23.020.10 - Stationary containers and tanks
• Technical Committee: CEN/TC 210 - GRP tanks and vessels
• Drafting Committee: CEN/TC 210 - GRP tanks and vessels
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 22-Sep-2021
• Due Date: 28-Apr-2021
• Completion Date: 22-Sep-2021
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13121-1:2021 - GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance criteria

Relations

• Replaces: EN 13121-1:2003 - GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
• Effective Date: 14-Feb-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13121-1:2021
01-december-2021
Nadomešča:
SIST EN 13121-1:2003
Nadzemni rezervoarji in posode iz umetnih mas, ojačanih s steklenimi vlakni - 1.
del: Osnovni materiali - Specifikacije in kriteriji sprejemljivosti
GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification
conditions and acceptance criteria
Oberirdische GFK-Tanks und -Behälter - Teil 1: Ausgangsmaterialien - Spezifikations-
und Abnahmebedingungen
Réservoirs et récipients en PRV pour applications hors sol - Partie 1 : Matières
premières - Specifications et Criteres d'acceptation
Ta slovenski standard je istoveten z: EN 13121-1:2021
ICS:
23.020.10 Nepremične posode in Stationary containers and
rezervoarji tanks
SIST EN 13121-1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13121-1:2021

---------------------- Page: 2 ----------------------
SIST EN 13121-1:2021


EN 13121-1
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2021
EUROPÄISCHE NORM
ICS 23.020.10 Supersedes EN 13121-1:2003
English Version

GRP tanks and vessels for use above ground - Part 1: Raw
materials - Specification conditions and acceptance criteria
Réservoirs et récipients en PRV pour applications hors Oberirdische GFK-Tanks und -Behälter - Teil 1:
sol - Partie 1 : Matières premières - Conditions de Ausgangsmaterialien - Spezifikations- und
spécification et critères d'acceptation Abnahmebedingungen
This European Standard was approved by CEN on 25 July 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13121-1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 13121-1:2021
EN 13121-1:2021 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviations . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviations . 8
4 Thermosetting resins . 9
4.1 General . 9
4.2 Unsaturated polyester resins . 11
4.3 Vinylester resins . 11
4.4 Vinylester urethane resins .
...