EN ISO 15874-1:2003/A1:2007
(Amendment)Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1 (ISO 15874-1:2003/Amd 1:2007)
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1 (ISO 15874-1:2003/Amd 1:2007)
Amandma A1:2007 je dodatek k standardu SIST EN ISO 15874-1:2004
This Part of EN ISO 15874 specifies the general aspects of polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see Table 1). This standard covers a range of service conditions (classes of application), design pressures and pipe dimension classes.
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen (PP) - Teil 1: Allgemeines - Änderung 1 (ISO 15874-1:2003/Amd 1:2007)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 1: Généralités - Amendement 1 (ISO 15874-1:2003/Amd 1:2007)
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo - Polipropilen (PP) - 1. del: Splošno - Dopolnilo 1 (ISO 15874-1:2003/Amd 1:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15874-1:2004/A1:2007
01-december-2007
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DQDSHOMDYH]YURþRLQKODGQRYRGR
3ROLSURSLOHQ 33 GHO 6SORãQR'RSROQLOR ,62 $PG
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1:
General - Amendment 1 (ISO 15874-1:2003/Amd 1:2007)
Kunststoff-Rohrleitungssysteme für die Warm- und Kaltwasserinstallation - Polypropylen
(PP) - Teil 1: Allgemeines (ISO 15874-1:2003/Amd 1:2007)
Systemes de canalisations en plastique pour les installations d'eau chaude et froide -
Polypropylene (PP) - Partie 1: Généralités - Amendement 1 (ISO 15874-1:2003/Amd
1:2007)
Ta slovenski standard je istoveten z: EN ISO 15874-1:2003/A1:2007
ICS:
23.040.20 Cevi iz polimernih materialov Plastics pipes
91.140.60 Sistemi za oskrbo z vodo Water supply systems
SIST EN ISO 15874-1:2004/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 15874-1:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2007
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) - Part 1: General - Amendment 1 (ISO
15874-1:2003/Amd 1:2007)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polypropylène (PP) - Kaltwasserinstallation - Polypropylen (PP) - Teil 1:
Partie 1: Généralités - Amendement 1 (ISO 15874- Allgemeines - Änderung 1 (ISO 15874-1:2003/Amd 1:2007)
1:2003/Amd 1:2007)
This amendment A1 modifies the European Standard EN ISO 15874-1:2003; it was approved by CEN on 2 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15874-1:2003/A1:2007: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 15874-1:2003/A1:2007 (E)
Foreword
This document (EN ISO 15874-1:2003/A1:2007) has been prepared by Technical Committee
CEN/TC 155 "Plastics piping systems and ducting systems", the secretariat of which is held by
NEN, in collaboration with Technical Committee ISO/TC 138 "Plastics pipes, fittings and valves
for the transport of fluids".
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2007, and conflicting national
standards shall be withdrawn at the latest by December 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.
2
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 15874-1
First edition
2003-12-01
AMENDMENT 1
2007-06-15
Plastics piping systems for hot and cold
water installations — Polypropylene
(PP) —
Part 1:
General
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau
chaude et froide — Polypropylène (PP) —
Partie 1: Généralités
AMENDEMENT 1
Reference number
ISO 15874-1:2003/Amd.1:2007(E)
©
ISO 2007
---------------------- Page: 4 ----------------------
ISO 15874-1:2003/Amd.1:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typeface
...
SLOVENSKI SIST EN ISO 15874-
1:2004/oprA1:2006
PREDSTANDARD
marec 2006
Cevni sistemi iz polimernih materialov za napeljave z vročo in hladno vodo –
Polipropilen (PP) – 1. del: Splošno – Dopolnilo 1 (ISO 15874-1:2003/DAM
1:2006)
Plastics piping systems for hot and cold water installations – Polypropylene (PP) –
Part 1: General – Amendment 1 (ISO 15874-1:2003/DAM 1:2006)
ICS 23.040.20; 91.140.60 Referenčna številka
SIST EN ISO 15874-
1:2004/oprA1:2006(en)
© Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
EN ISO 15874-1:2003
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2006
ICS 23.040.20; 91.140.60
English Version
Plastics piping systems for hot and cold water installations -
Polypropylene (PP) - Part 1: General - Amendment 1 (ISO
15874-1:2003/DAM 1:2006)
Systèmes de canalisations en plastique pour les Kunststoff-Rohrleitungssysteme für die Warm- und
installations d'eau chaude et froide - Polypropylène (PP) - Kaltwasserinstallation - Polypropylen (PP) - Teil 1:
Partie 1: Généralités - Amendement 1 (ISO 15874- Allgemeines (ISO 15874-1:2003/DAM 1:2006)
1:2003/DAM 1:2006)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 155.
This draft amendment A1, if approved, will modify the European Standard EN ISO 15874-1:2003. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15874-1:2003/prA1:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 15874-1:2003/prA1:2006 (E)
Foreword
This document (EN ISO 15874-1:2003/prA1:2006) has been prepared by Technical
Committee CEN/TC 155 "Plastics piping systems and ducting systems", the secretariat of
which is held by NEN, in collaboration with Technical Committee ISO/TC 138 "Plastics pipes,
fittings and valves for the transport of fluids".
This document is currently submitted to the parallel Enquiry.
2
---------------------- Page: 3 ----------------------
DRAFT AMENDMENT ISO 15874-1:2003/DAmd 1
ISO/TC 138/SC 2 Secretariat: SNV
Voting begins on: Voting terminates on:
2006-01-12 2006-06-12
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Plastics piping systems for hot and cold water installations —
Polypropylene (PP) —
Part 1:
General
AMENDMENT 1
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide — Polypropylène (PP) —
Partie 1: Généralités
AMENDEMENT 1
ICS 23.040.20; 91.140.60
ISO/CEN PARALLEL ENQUIRY
This draft International Standard is a draft standard developed within the European Committee for
Standardization (CEN) and processed under the CEN-lead mode of collaboration as defined in the
Vienna Agreement. The document has been transmitted by CEN to ISO for circulation for ISO member
body voting in parallel with CEN enquiry. Comments received from ISO member bodies, including those
from non-CEN members, will be considered by the appropriate CEN technical body. Should this DIS be
accepted, a final draft, established on the basis of comments received, will be submitted to a parallel two-
month FDIS vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee secretariat.
ISO Central Secretariat work of editing an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.