EN ISO 4126-6:2003

Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003)

ISO 4126-6:2003 gives guidance on the application, selection and installation of bursting disc safety devices used to protect pressure equipment from excessive pressure and/or excessive vacuum.

Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 6: Berstscheibeneinrichtung; Anwendung, Auswahl und Einbau (ISO 4126-6:2003)

Dispositifs de sécurité contre les pressions excessives - Partie 6: Application, sélection et installation des dispositifs de sûreté à disque de rupture (ISO 4126-6:2003)

L'ISO 4126-6 donne des lignes directrices pour l'application, la sélection et l'installation de dispositifs de sûreté à disque de rupture utilisés pour protéger les équipements sous pression contre des pressions excessives et/ou des dépressions excessives.

Naprave za varovanje pred visokim tlakom - 6. del: Uporaba, izbira in vgradnja razpočnih membran (ISO 4126-6:2003)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2003
• Withdrawal Date: 17-Jun-2014
• ICS: 13.240 - Protection against excessive pressure
• Technical Committee: CEN/TC 69 - Industrial valves
• Drafting Committee: CEN/TC 69/WG 10 - Safety devices against excessive pressure
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 18-Jun-2014
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 4126-6:2004 - Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003)

Relations

• Replaced By: EN ISO 4126-6:2014 - Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2014)
• Effective Date: 25-Jun-2014
• Corrected By: EN ISO 4126-6:2003/AC:2006 - Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO 4126-6:2003)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4126-6:2004
01-junij-2004
1DSUDYH]DYDURYDQMHSUHGYLVRNLPWODNRPGHO8SRUDEDL]ELUDLQYJUDGQMD
UD]SRþQLKPHPEUDQ,62
Safety devices for protection against excessive pressure - Part 6: Application, selection
and installation of bursting disc safety devices (ISO 4126-6:2003)
Sicherheitseinrichtungen gegen unzulässigen Überdruck - Teil 6:
Berstscheibeneinrichtung; Anwendung, Auswahl und Einbau (ISO 4126-6:2003)
Dispositifs de sécurité contre les pressions excessives - Partie 6: Application, sélection
et installation des dispositifs de sureté a disque de rupture (ISO 4126-6:2003)
Ta slovenski standard je istoveten z: EN ISO 4126-6:2003
ICS:
13.240 Varstvo pred previsokim Protection against excessive
tlakom pressure
SIST EN ISO 4126-6:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4126-6:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 4126-6:2004
EUROPEAN STANDARD
EN ISO 4126-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2003
ICS 13.240
English version
Safety devices for protection against excessive pressure - Part
6: Application, selection and installation of bursting disc safety
devices (ISO 4126-6:2003)
Dispositifs de sécurité contre les pressions excessives - Sicherheitseinrichtungen gegen unzulässigen Überdruck -
Partie 6: Application, sélection et installation des dispositifs Teil 6: Berstscheibeneinrichtung; Anwendung, Auswahl und
de sûreté à disque de rupture (ISO 4126-6:2003) Einbau (ISO 4126-6:2003)
This European Standard was approved by CEN on 27 December 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4126-6:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4126-6:2004
EN ISO 4126-6:2003 (E)
Contents
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Symbols and units .9
5 Application.10
6 Selection .11
6.1 Selection of bursting disc safety devices .11
6.2 Selection of the performance tolerance .12
7 Installation .15
7.1 General.15
...