prEN 13763-15

Explosives for civil uses - Detonators and detonating cord relays - Part 15: Determination of equivalent initiating capability

This document specifies a method of determining the equivalent initiating capability of electric detonators, non-electric detonators and electronic detonators.
This document specifies a functioning test (after storage) at high and low temperatures.
This document is not applicable to surface connectors or detonating cord relays.
This document applies to explosives for civil uses.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 15: Bestimmung der Zündstärke

Dieses Dokument legt ein Verfahren für die Bestimmung der Zündstärke von elektrischen Zündern, nichtelektrischen Zündern und elektronischen Zündern fest.
Dieses Dokument legt eine Funktionsprüfung (nach der Lagerung) bei hohen und bei niedrigen Temperaturen fest.
Dieses Dokument gilt nicht für Oberflächenverbinder und Sprengschnurverzögerer.
Dieses Dokument gilt für Explosivstoffe für zivile Zwecke.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 15 : Détermination de la capacité d’amorçage équivalente

Le présent document spécifie une méthode permettant de déterminer la capacité d’amorçage équivalente des détonateurs électriques, non électriques et électroniques.
Le présent document spécifie un essai de fonctionnement (après stockage) à basse et haute températures.
Le présent document n’est applicable ni aux connecteurs de surface ni aux relais pour cordeau détonant.
Le présent document s’applique aux explosifs à usage civil.

Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 15. del: Ugotavljanje sposobnosti iniciranja

General Information

• Status: Not Published
• Publication Date: 29-May-2023
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 20-Dec-2023
• Due Date: 24-Jul-2021
• Completion Date: 20-Dec-2023
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Mandate: M/562 - Standardization Request on Explosives for civil use
• Ref Project: oSIST prEN 13763-15:2021 - Explosives for civil uses - Detonators and relays - Part 15: Determination of equivalent initiating capability

Relations

• Revises: EN 13763-15:2004 - Explosives for civil uses - Detonators and relays - Part 15: Determination of equivalent initiating capability
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13763-15:2021
01-april-2021
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 15. del: Ugotavljanje
sposobnosti iniciranja
Explosives for civil uses - Detonators and relays - Part 15: Determination of equivalent
initiating capability
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 15:
Bestimmung der Zündstärke
Explosifs à usage civil - Détonateurs et relais - Partie 15 : Détermination de la capacité
d'amorçage équivalente
Ta slovenski standard je istoveten z: prEN 13763-15
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-15:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13763-15:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13763-15:2021


DRAFT
EUROPEAN STANDARD
prEN 13763-15
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13763-15:2004
English Version

Explosives for civil uses - Detonators and detonating cord
relays - Part 15: Determination of equivalent initiating
capability
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 15: Détermination de la Sprengschnurverbinder - Teil 15: Bestimmung der
capacité d'amorçage équivalente Zündstärk
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-15:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13763-15:2021
prEN 13763-15:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 6
5.1 Underwater initiating capability test . 6
5.2 Functioning test at high and low temperatures . 7
6 Preparation and handling of test samples and test pieces . 9
6.1 Handling of test samples .
...