Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic properties

This European Standard specifies a method to calculate the detonation characteristics at the constant-volume explosion state and some parameters derived thereof.

Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 15: Berechnung der thermodynamischen Eigenschaften

Diese Europäische Norm legt ein Verfahren zur Berechnung der Detonationskennwerte für den
Explosionszustand mit konstantem Volumen und einiger davon abgeleiteter Parameter fest.

Explosifs à usage civil - Explosifs - Partie 15 : Calcul des propriétés thermodynamiques

La présente Norme européenne décrit une méthode de calcul des caractéristiques de la détonation pour l'état d'explosion à volume constant et de certains paramètres dérivés.

Eksplozivi za civilno uporabo - Razstreliva -15. del: Izračun termodinamičnih lastnosti

General Information

Publication Date
Withdrawal Date
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date

Buy Standard

EN 13631-15:2005
English language
21 pages
sale 10% off
sale 10% off
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - High explosives - Part 15: Calculation of thermodynamic propertiesPRGLQDPLþQLKODVWQRVWLExplosifs a usage civil - Explosifs - Partie 15 : Calcul des propriétés thermodynamiquesExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 15: Berechnung der thermodynamischen EigenschaftenTa slovenski standard je istoveten z:EN 13631-15:2005SIST EN 13631-15:2005en71.100.30ICS:SLOVENSKI
STANDARDSIST EN 13631-15:200501-julij-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13631-15May 2005ICS 71.100.30English versionExplosives for civil uses - High explosives - Part 15: Calculationof thermodynamic propertiesExplosifs à usage civil - Explosifs - Partie 15 : Calcul despropriétés thermodynamiquesExplosivstoffe für zivile Zwecke - Sprengstoffe - Teil 15:Berechnung der thermodynamischen EigenschaftenThis European Standard was approved by CEN on 21 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13631-15:2005: E

EN 13631-15:2005 (E) 2 Contents Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Calculation procedure.5 5 Report.15 Annex A (informative)
Sample calculations.16 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.20 Bibliography.21

EN 13631-15:2005 (E) 3 Foreword This document (EN 13631-15:2005) has been prepared by Technical Committee CEN/TC 321 "Explosives for civil uses", the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2005, and conflicting national standards shall be withdrawn at the latest by November 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This European Standard is one of a series of standards on Explosives for civil uses– High explosives. The other parts of this series are: Part 1: Requirements. Part 2: Determination of thermal stability of explosives. Part 3: Determination of sensitiveness

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.