Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 24024-2:2021)

This document specifies the methods of preparation of test samples and the test methods to be used in determining the properties of PVC resins. Requirements for handling test material and for conditioning the material before testing are given here. In addition, properties and test methods which are suitable and necessary to characterize PVC resins are listed.

Kunststoffe - Homo- und Copolymere des Vinylchlorids - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 24024-2:2021)

Dieses Dokument legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von PVC Polymeren anzuwendenden Prüfverfahren fest. Es enthält Anforderungen an die Handhabung des Prüfmaterials und an das Konditionieren des Materials vor der Prüfung. Darüber hinaus sind Eigenschaften und Prüfverfahren aufgelistet, die zur Charakterisierung von PVC Polymeren geeignet und notwendig sind.

Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie 2: Préparation des échantillons pour essai et détermination des propriétés (ISO 24024-2:2021)

Le présent document spécifie les méthodes de préparation des échantillons pour essai et les méthodes d'essai qui doivent être utilisées pour la détermination des propriétés des résines PVC. Les exigences relatives à la manipulation du matériau d'essai et au conditionnement du matériau avant essai sont indiquées. En outre, les propriétés et méthodes d'essai qui sont utiles et nécessaires pour caractériser les résines PVC sont énumérées.

Polimerni materiali - Homo- in kopolimeri vinilklorida - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 24024-2:2021)

General Information

Status
Published
Publication Date
23-Feb-2021
Withdrawal Date
30-Aug-2021
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Feb-2021
Completion Date
24-Feb-2021

Relations

Buy Standard

Standard
EN ISO 24024-2:2021
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 24024-2:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 24024-2:2021
01-april-2021
Nadomešča:
SIST EN ISO 1060-2:2000
Polimerni materiali - Homo- in kopolimeri vinilklorida - 2. del: Priprava
preskušancev in ugotavljanje lastnosti (ISO 24024-2:2021)
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of
test samples and determination of properties (ISO 24024-2:2021)
Kunststoffe - Homo- und Copolymere des Vinylchlorids - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften (ISO 24024-2:2021)
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie
2: Préparation des échantillons pour essai et détermination des propriétés (ISO 24024-
2:2021)
Ta slovenski standard je istoveten z: EN ISO 24024-2:2021
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 24024-2:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 24024-2:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 24024-2:2021


EN ISO 24024-2
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2021
EUROPÄISCHE NORM
ICS 83.080.20 Supersedes EN ISO 1060-2:1999
English Version

Plastics - Homopolymer and copolymer resins of vinyl
chloride - Part 2: Preparation of test samples and
determination of properties (ISO 24024-2:2021)
Plastiques - Résines d'homopolymères et de Kunststoffe - Homo- und Copolymere des Vinylchlorids
copolymères de chlorure de vinyle - Partie 2: - Teil 2: Herstellung von Probekörpern und
Préparation des échantillons pour essai et Bestimmung von Eigenschaften (ISO 24024-2:2021)
détermination des propriétés (ISO 24024-2:2021)
This European Standard was approved by CEN on 8 February 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 24024-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 24024-2:2021
EN ISO 24024-2:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 24024-2:2021
EN ISO 24024-2:2021 (E)
European foreword
This document (EN ISO 24024-2:2021) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by
NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2021, and conflicting national standards shall
be withdrawn at the latest by August 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1060-2:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 24024-2:2021 has been approved by CEN as EN ISO 24024-2:2021 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 24024-2:2021

---------------------- Page: 6 ----------------------
SIST EN ISO 24024-2:2021
INTERNATIONAL ISO
STANDARD 24024-2
First edition
2021-02
Plastics — Homopolymer and
copolymer resins of vinyl chloride —
Part 2:
Preparation of test samples and
determination of properties
Plastiques — Résines d'homopolymères et de copolymères de chlorure
de vinyle —
Partie 2: Préparation des échantillons pour essai et détermination des
propriétés
Reference number
ISO 24024-2:2021(E)
©
ISO 2021

---------------------- Page: 7 ----------------------
SIST EN ISO 24024-2:2021
ISO 24024-2:2021(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved

---------------------- Page: 8 ----------------------
SIST EN ISO 24024-2:2021
ISO 24024-2:2021(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preparation of test samples . 2
4.1 Sampling . 2
4.2 Preparation of standard pastes. 2
5 Conditioning of test samples . 3
6 Determination of properties . 3
© ISO 2021 – All rights reserved iii

---------------------- Page: 9 ----------------------
SIST EN ISO 24024-2:2021
ISO 24024-2:2021(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to
...

SLOVENSKI STANDARD
oSIST prEN ISO 24024-2:2019
01-maj-2019
Polimerni materiali - Homo- in kopolimeri vinilklorida - 2. del: Priprava
preskušancev in ugotavljanje lastnosti (ISO/DIS 24024-2:2019)
Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of
test samples and determination of properties (ISO/DIS 24024-2:2019)
Kunststoffe - Homo- und Copolymere des Vinylchlorids - Teil 2: Herstellung von
Probekörpern und Bestimmung von Eigenschaften (ISO/DIS 24024-2:2019)
Plastiques - Résines d'homopolymères et de copolymères de chlorure de vinyle - Partie
2: Préparation des échantillons pour essai et détermination des propriétés (ISO/DIS
24024-2:2019)
Ta slovenski standard je istoveten z: prEN ISO 24024-2
ICS:
83.080.20 Plastomeri Thermoplastic materials
oSIST prEN ISO 24024-2:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 24024-2:2019

---------------------- Page: 2 ----------------------
oSIST prEN ISO 24024-2:2019
DRAFT INTERNATIONAL STANDARD
ISO/DIS 24024-2
ISO/TC 61/SC 9 Secretariat: KATS
Voting begins on: Voting terminates on:
2019-03-15 2019-06-07
Plastics — Homopolymer and copolymer resins of vinyl
chloride —
Part 2:
Preparation of test samples and determination of
properties
Plastiques — Résines d'homopolymères et de copolymères de chlorure de vinyle —
Partie 2: Préparation des échantillons pour essai et détermination des propriétés
ICS: 83.080.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 24024-2:2019(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2019

---------------------- Page: 3 ----------------------
oSIST prEN ISO 24024-2:2019
ISO/DIS 24024-2:2019(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 24024-2:2019
ISO/DIS 24024-2:2019(E)

Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Preparation of test samples . 2
4.1 Sampling . 2
4.2 Preparation of standard pastes. 2
5 Conditioning of test samples . 3
6 Determination of properties . 3
© ISO 2019 – All rights reserved iii

---------------------- Page: 5 ----------------------
oSIST prEN ISO 24024-2:2019
ISO/DIS 24024-2:2019(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electro technical Commission (IEC) on all matters of electro
technical standardization.
Draft International Standards adopted by the technical committees are circulated to the member
bodies tor voting. Publication as an International Standard requires approval by at least 75 % of the
member bodies casting a vote.
International Standard ISO 1060-2 was prepared by Technical Committee ISO/TC 61, Plastics,
Subcommittee SC 9, Thermoplastic materials.
This third edition cancels and replaces the second edition (ISO 1060-2:1985) and includes the following
main changes:
a) The list of test methods in table 1 has been revised;
b) The preparation of standard pastes has been included.
ISO 1060 consists of the following parts, under the general title Plastics - Homopolymer and copolymer
resins of vinyl chloride.
Part 1: Designation system and basis for specifications
Part 2: Preparation of test samples and determination of properties
iv © ISO 2019 – All rights reserved

---------------------- Page: 6 ----------------------
oSIST prEN ISO 24024-2:2019
DRAFT INTERNATIONAL STANDARD ISO/DIS 24024-2:2019(E)
Plastics — Homopolymer and copolymer resins of vinyl
chloride —
Part 2:
Preparation of test samples and determination of
properties
1 Scope
This part of ISO 1060 specified the methods of preparation of test samples and the test methods to
be used in determining the properties of PVC resins. Requirements for handling test material and for
conditioning the material before testing are given here. In addition, properties and test methods which
are suitable and necessary to characterize PVC resins are listed.
In order to obtain reproducible and comparable test results, i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.