EN 14328:2005
(Main)Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods
Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods
This document specifies the requirements for the design, cut resistance, ergonomic characteristics, innocuousness, fixings, construction materials, marking and instructions for use, for chain mail gloves and armguards providing protection against powered knives. Appropriate test methods are also specified.
Schutzkleidung - Handschuhe und Armschützer zum Schutz gegen Schnittverletzungen durch angetriebene Messer - Anforderungen und Prüfverfahren
Dieses Dokument legt für Metallringgeflecht-Handschuhe und Armschützer zum Schutz gegen angetriebene
Messer die Anforderungen an Gestaltung, Schnittfestigkeit, ergonomische Merkmale, Unschädlichkeit,
Befestigungen, Baustoffe, Kennzeichnung und Gebrauchsanleitungen fest. Geeignete Prüfverfahren sind
ebenfalls festgelegt.
Vêtements de protection - Gants et protège-bras protégeant contre les coupures par des couteaux électriques - Exigences et méthodes d'essai
La présente norme européenne spécifie les exigences concernant la conception, la résistance à la coupure,
les caractéristiques ergonomiques, l'innocuité, la fixation, les matériaux de construction, le marquage et les
instructions d'utilisation des gants et des protège-bras en cote de maille assurant une protection contre les
couteaux électriques. Elle précise également des méthodes d'essai appropriées.
Varovalna obleka - Rokavice in ščitniki rok za varovanje pred urezninami gnanih nožev – Zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methodsVetements de protection - Gants et protege-bras protégeant contre les coupures par des couteaux électriques - Exigences et méthodes d'essaiSchutzkleidung - Handschuhe und Armschützer zum Schutz gegen Schnittverletzungen durch angetriebene Messer - Anforderungen und Prüfverfahren13.340.40Varovanje dlani in rokHand and arm protectionICS:SIST EN 14328:2005enTa slovenski standard je istoveten z:EN 14328:200501-julij-2005SIST EN 14328:2005SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14328April 2005ICS 13.340.40English versionProtective clothing - Gloves and armguards protecting againstcuts by powered knives - Requirements and test methodsVêtements de protection - Gants et protège-brasprotégeant contre les coupures par des couteauxélectriques - Exigences et méthodes d'essaiSchutzkleidung - Handschuhe und Armschützer zumSchutz gegen Schnittverletzungen durch angetriebeneMesser - Anforderungen und PrüfverfahrenThis European Standard was approved by CEN on 15 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14328:2005: E
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC.12 Bibliography.14
3 Foreword This document (EN 14328:2005) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by October 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/686/EEC. For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document contains a bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Electricity or compressed air normally powers them. The tool driving the blade may be partly supported by the work pieces or by the workbench, or may be held in one hand. The edges of the blades may be quite smooth, coarsely honed, finely serrated or scalloped. They need to be distinguished from cutting blades with saw-tooth edges with teeth above 1 mm in height, which generally are unsafe to use with chain mail gloves, and armguards. Powered knives enable workers to cut rapidly through very resistant materials. Their hands are always in the vicinity of the blade in order to present the work piece to the blade, and it is not possible to guard the whole cutting edge. Thus there is significant potential for serious hand injuries during cutting operations. Most accidents occur during cutting but they are also recorded during blade changing, blade cleaning, guard adjustment, and moving the tool. At the present time it is not known that any practical glove material other than metal chain mail provides significant protection against powered knives. Even chain mail is rapidly cut through and injuries will only be avoided by strict adherence to safe working practices. Armguards made from sheet metal or rigid plastic material also provide some protection. Users of chain mail gloves note that the vibration and noise caused by contact of their glove with a powered knife blade often enables them to react in time to prevent an injury.
5 1 Scope This document specifies the requirements for the design, cut resistance, ergonomic characteristics, innocuousness, fixings, construction materials, marking and instructions for use, for chain mail gloves and armguards providing protection against powered knives. Appropriate test methods are also specified. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 340, Protective clothing — General requirements. EN 420, Protective gloves — General requirements and test methods. EN 1082-1:1996, Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1:
Chain mail gloves and arm guards. EN 1082-2:2000, Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail. EN 1811, Reference test method for release of nickel from products intended to come into direct and prolonged contact with the skin. EN 12472, Method for the simulation of wear and corrosion for the detection of nickel release from coated items. EN 14362-1, Textiles — Methods for the determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible without extraction. EN 14362-2, Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 2: Detection of the use of certain azo colorants accessible by extracting the fibres. EN 23758, Textiles — Care labelling code using symbols (ISO 3758:1991). EN ISO 4045, Leather — Determination of pH (ISO 4045:1977). EN ISO 13998, Protective clothing — Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003). ISO 3071, Textiles — Determination of pH of the aqueous extract.
3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1082-1:1996 and EN 1082-2:2000, and the following apply. 3.1 powered knife hand held or fixed machine using a power source to drive a rotating, reciprocating or vibrating knife blade 3.2 knife blade sharp edged cutting tool with a either a smooth edge, or a serrated edge with points less than 1 mm high, or with a scalloped edge with points less than 3 mm high
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.