Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating drum method

This European Standard specifies the rotating drum test apparatus and associated test method for the reproducible production of dust from a bulk material under standard conditions, and the measurement of the inhalable, thoracic and respirable fractions of this dust, with reference to existing European Standards, where relevant (see Clause 6).
This method is suitable for general bulk material handling processes, including all those processes where the bulk material is dropped, or can be dropped. It differs from the continuous drop method presented in EN 15051 3 in this European Standard, the same bulk material is repeatedly dropped, while in EN 15051 3, the bulk material is dropped only once, but continuously.
Furthermore, this European Standard specifies the environmental conditions, the sample handling and analytical procedures, and the method of calculating and presenting the results. A classification scheme for dustiness is specified, to provide a standardised way to express and communicate the results to users of the bulk materials.
This European Standard is applicable to powdered, granular or pelletised bulk materials. A standard sample volume is used.
This European Standard is not applicable to test the dust released when solid bulk materials are mechanically reduced (e.g. cut, crushed) or to evaluate handling procedures for the bulk materials.

Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern - Teil 2: Verfahren mit rotierender Trommel

Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux pulvérulents en vrac - Partie 2 : Méthode du tambour rotatif

Izpostavljenost na delovnem mestu - Meritve prašnosti razsutih materialov - 2. del: Metoda z vrtečim bobnom - Dopolnilo A1

General Information

Status
Not Published
Current Stage
5060 - Closure of Vote - Formal Approval
Due Date
05-Aug-2016
Completion Date
05-Aug-2016

RELATIONS

Buy Standard

Amendment
EN 15051-2:2014/kFprA1:2016
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 15051-2:2014/kFprA1:2016
01-julij-2016

,]SRVWDYOMHQRVWQDGHORYQHPPHVWX0HULWYHSUDãQRVWLUD]VXWLKPDWHULDORYGHO

0HWRGD]YUWHþLPEREQRP'RSROQLOR$

Workplace exposure - Measurement of the dustiness of bulk materials - Part 2: Rotating

drum method

Exposition am Arbeitsplatz - Messung des Staubungsverhaltens von Schüttgütern - Teil

2: Verfahren mit rotierender Trommel

Exposition sur les lieux de travail - Mesurage du pouvoir de resuspension des matériaux

pulvérulents en vrac - Partie 2 : Méthode du tambour rotatif
Ta slovenski standard je istoveten z: EN 15051-2:2013/FprA1
ICS:
13.040.30 Kakovost zraka na delovnem Workplace atmospheres
mestu
SIST EN 15051-2:2014/kFprA1:2016 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 15051-2:2014/kFprA1:2016
---------------------- Page: 2 ----------------------
SIST EN 15051-2:2014/kFprA1:2016
FINAL DRAFT
EUROPEAN STANDARD
EN 15051-2:2013
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2016
ICS 13.040.30
English Version
Workplace exposure - Measurement of the dustiness of
bulk materials - Part 2: Rotating drum method

Exposition sur les lieux de travail - Mesurage du Exposition am Arbeitsplatz - Messung des

pouvoir de resuspension des matériaux pulvérulents Staubungsverhaltens von Schüttgütern - Teil 2:

en vrac - Partie 2 : Méthode du tambour rotatif Verfahren mit rotierender Trommel

This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical

Committee CEN/TC 137.

This draft amendment A1, if approved, will modify the European Standard EN 15051-2:2013. If this draft becomes an

amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.