iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 20553

(Main)

Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO/DIS 20553:2023)

Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO/DIS 20553:2023)

Strahlenschutz - Überwachung von Arbeitnehmern, die beruflich der Gefahr einer internen Kontamination mit radioaktiven Stoffen ausgesetzt sind (ISO/DIS 20553:2023)

Radioprotection - Surveillance professionnelle des travailleurs exposés à un risque de contamination interne par des matériaux radioactifs (ISO/DIS 20553:2023)

Radiološka zaščita - Spremljanje stanja delavcev, ki so poklicno izpostavljeni tveganju notranje kontaminacije z radioaktivnim materialom (ISO/DIS 20553:2023)

General Information

Status
Not Published
Publication Date
22-Jun-2025
ICS
13.280 - Radiation protection
Technical Committee
CEN/TC 430 - Nuclear energy, nuclear technologies, and radiological protection
Drafting Committee
CEN/TC 430 - Nuclear energy, nuclear technologies, and radiological protection
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
16-Feb-2024
Completion Date
16-Feb-2024
Ref Project
oSIST prEN ISO 20553:2024 - Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO/DIS 20553:2023)

Relations

Revises
EN ISO 20553:2017 - Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006)
Effective Date
19-Jan-2023

Buy Standard

prEN ISO 20553:2024prEN ISO 20553:2024
PreviousNext
Draft
prEN ISO 20553:2024
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 20553:2024
01-februar-2024
Radiološka zaščita - Spremljanje stanja delavcev, ki so poklicno izpostavljeni
tveganju notranje kontaminacije z radioaktivnim materialom (ISO/DIS 20553:2023)
Radiation protection - Monitoring of workers occupationally exposed to a risk of internal
contamination with radioactive material (ISO/DIS 20553:2023)
Strahlenschutz - Überwachung von Arbeitnehmern, die beruflich der Gefahr einer
internen Kontamination mit radioaktiven Stoffen ausgesetzt sind (ISO/DIS 20553:2023)
Radioprotection - Surveillance professionnelle des travailleurs exposés à un risque de
contamination interne par des matériaux radioactifs (ISO/DIS 20553:2023)
Ta slovenski standard je istoveten z: prEN ISO 20553
ICS:
13.100 Varnost pri delu. Industrijska Occupational safety.
higiena Industrial hygiene
13.280 Varstvo pred sevanjem Radiation protection
oSIST prEN ISO 20553:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 20553:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 20553:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20553
ISO/TC 85/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2023-11-24 2024-02-16
Radiation protection — Monitoring of workers
occupationally exposed to a risk of internal contamination
with radioactive material
Radioprotection — Surveillance professionnelle des travailleurs exposés à un risque de contamination
interne par des matériaux radioactifs
ICS: 13.280
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 20553:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 20553:2024
ISO/DIS 20553:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 20553
ISO/TC 85/SC 2 Secretariat: AFNOR
Voting begins on: Voting terminates on:

Radiation protection — Monitoring of workers
occupationally exposed to a risk of internal contamination
with radioactive material
Radioprotection — Surveillance professionnelle des travailleurs exposés à un risque de contamination
interne par des matériaux radioactifs
ICS: 13.280
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 20553:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 20553:2024
ISO/DIS 20553:2023(E)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 19238:2023(Main)
Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics - Dicentric assay (ISO 19238:2023)
SIST EN ISO 19238:2023

This document provides criteria for quality assurance and quality control, evaluation of the performance and the accreditation of biological dosimetry by cytogenetic service laboratories using the dicentric assay performed with manual scoring.
This document is applicable to
a)    the confidentiality of personal information, for the requestor and the service laboratory,
b)    the laboratory safety requirements,
c)    the calibration sources and calibration dose ranges useful for establishing the reference dose-response curves that contribute to the dose estimation from unstable chromosome aberration frequency and the detection limit,
d)    the scoring procedure for unstable chromosome aberrations used for biological dosimetry,
e)    the criteria for converting a measured aberration frequency into an estimate of absorbed dose,
f)     the reporting of results,
g)    the quality assurance and quality control, and
h)    informative annexes containing sample instructions for requestor (see Annex A), sample questionnaire (see Annex B), sample report (see Annex C), fitting of the low dose-response curve by the method of maximum likelihood and calculating the error of the dose estimate (see Annex D), odds ratio method for cases of suspected exposure to a low dose (see Annex E), a method for determining the decision threshold and detection limit (see Annex F) and sample data sheet for recording aberrations (see Annex G).

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21909-2:2023(Main)
Passive neutron dosimetry systems - Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021)
SIST EN ISO 21909-2:2023

This document provides methodology and criteria to qualify the dosimetry system at workplaces where
it is used. The criteria in this document apply to dosimetry systems which do not meet the criteria with
regard to energy and direction dependent responses described in ISO 21909-1.
The qualification of the dosimetry system at workplace aims to demonstrate that:
— either, the non-conformity of the dosimetry system to some of the requirements on the energy or
direction dependent responses defined in ISO 21909-1 does not lead to significant discrepancies in
the dose determination for a certain workplace field;
— or, that the correction factor or function used for this specific studied workplace enables the
dosimetry system to accurately determine the conventional dose value with uncertainties similar
to the ones given in ISO 21909-1.
The methodologies to characterize the work place field in order to perform the qualification of the
dosimetry system are given in Annex A. Annex B is complementary as it gives the practical methods to
follow, once one methodology is chosen.
The provider of the dosimetry system shall provide the type test results corresponding to ISO 21909-1.
However, when the dosimetry system to be qualified does not comply with all the criteria of ISO 21909-1
dealing with the energy and angle dependence of the response, some tests of the ISO 21909-1 can be not
performed.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 21909-1:2023(Main)
Passive neutron dosimetry systems - Part 1: Performance and test requirements for personal dosimetry (ISO 21909-1:2021)
SIST EN ISO 21909-1:2023

This document provides performance and test requirements for determining the acceptability of
neutron dosimetry systems to be used for the measurement of personal dose equivalent, Hp(10), for
neutrons ranging in energy from thermal to 20 MeV1).
This document applies to all passive neutron detectors that can be used within a personal dosemeter
in part or in all of the above-mentioned neutron energy range. No distinction between the different
techniques available in the marketplace is made in the description of the tests. Only generic distinctions,
for instance, as disposable or reusable dosemeters, are considered.
This document describes type tests only. Type tests are made to assess the basic characteristics of the
dosimetry systems and are often ensured by recognized national laboratories
This document does not present performance tests for characterizing the degradation induced by the
following:
— intrinsic temporal variability of the quality of the dosemeter supplied by the manufacturer;
— intrinsic temporal variability of preparation treatments (before irradiation and/or before reading),
if existing;
— intrinsic temporal variability of reading process;
— degradation due to environmental effects on the preparation treatments, if existing;
— degradation due to environmental effects on the reading process.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20785-3:2023(Main)
Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO 20785-3:2023)
SIST EN ISO 20785-3:2023

This document gives the basis for the measurement of ambient dose equivalent at flight altitudes for the evaluation of the exposures to cosmic radiation in civilian aircraft.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13304-1:2022(Main)
Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation - Part 1: General principles (ISO 13304-1:2020)
SIST EN ISO 13304-1:2023

The primary purpose of this document is to provide minimum acceptable criteria required to establish a procedure for retrospective dosimetry by electron paramagnetic resonance spectroscopy and to report the results.
The second purpose is to facilitate the comparison of measurements related to absorbed dose estimation obtained in different laboratories.
This document covers the determination of absorbed dose in the measured material. It does not cover the calculation of dose to organs or to the body. It covers measurements in both biological and inanimate samples, and specifically:
a)   based on inanimate environmental materials like glass, plastics, clothing fabrics, saccharides, etc., usually made at X-band microwave frequencies (8 GHz to 12 GHz);
b)   in vitro tooth enamel using concentrated enamel in a sample tube, usually employing X-band frequency, but higher frequencies are also being considered;
c)   in vivo tooth dosimetry, currently using L-band (1 GHz to 2 GHz), but higher frequencies are also being considered;
d)   in vitro nail dosimetry using nail clippings measured principally at X-band, but higher frequencies are also being considered;
e)   in vivo nail dosimetry with the measurements made at X-band on the intact finger or toe;
f)    in vitro measurements of bone, usually employing X-band frequency, but higher frequencies are also being considered.
For biological samples, in vitro measurements are carried out in samples after their removal from the person or animal and under laboratory conditions, whereas the measurements in vivo are carried out without sample removal and may take place under field conditions.
NOTE    The dose referred to in this document is the absorbed dose of ionizing radiation in the measured materials.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13304-2:2022(Main)
Radiological protection - Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation - Part 2: Ex vivo human tooth enamel dosimetry (ISO 13304-2:2020)
SIST EN ISO 13304-2:2023

The purpose of this document is to provide minimum criteria required for quality assurance and quality control, evaluation of the performance and to facilitate the comparison of measurements related to absorbed dose estimation obtained in different laboratories applying ex vivo X-band EPR spectroscopy with human tooth enamel.
This document covers the determination of absorbed dose in tooth enamel (hydroxyapatite). It does not cover the calculation of dose to organs or to the body.
This document addresses:
a)   responsibilities of the customer and laboratory;
b)   confidentiality and ethical considerations;
c)   laboratory safety requirements;
d)   the measurement apparatus;
e)   preparation of samples;
f)    measurement of samples and EPR signal evaluation;
g)   calibration of EPR dose response;
h)   dose uncertainty and performance test;
i)     quality assurance and control.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16640:2022(Main)
Monitoring radioactive gases in effluents from facilities producing positron emitting radionuclides and radiopharmaceuticals (ISO 16640:2021)
SIST EN ISO 16640:2023

This document focuses on monitoring the activity concentrations of radioactive gases. They allow the calculation of the activity releases, in the gaseous effluent discharge from facilities producing positron emitting radionuclides and radiopharmaceuticals. Such facilities produce short-lived radionuclides used for medical purposes or research and can release gases typically including, but not limited to 18F, 11C, 15O and 13N. These facilities include accelerators, radiopharmacies, hospitals and universities. This document provides performance‑based criteria for the design and use of air monitoring equipment including probes, transport lines, sample monitoring instruments, and gas flow measuring methods. This document also provides information on monitoring program objectives, quality assurance, development of air monitoring control action levels, system optimisation and system performance verification.
The goal of achieving an unbiased measurement is accomplished either by direct (in-line) measurement on the exhaust stream or with samples extracted from the exhaust stream (bypass), provided that the radioactive gases are well mixed in the airstream. This document sets forth performance criteria and recommendations to assist in obtaining valid measurements.
NOTE 1 The criteria and recommendations of this document are aimed at monitoring which is conducted for regulatory compliance and system control. If existing air monitoring systems were not designed according to the performance criteria and recommendations of this document, an evaluation of the performance of the system is advised. If deficiencies are discovered based on a performance evaluation, a determination of the need for a system retrofit is to be made and corrective actions adopted where practicable.
NOTE 2 The criteria and recommendations of this document apply under both normal and off‑normal operating conditions, provided that these conditions do not include production of aerosols or vapours. If the normal and/or off-normal conditions produce aerosols and vapours, then the aerosol collection principles of ISO 2889 also apply.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9978:2022(Main)
Radiation protection - Sealed sources - Leakage test methods (ISO 9978:2020)
SIST EN ISO 9978:2023

This document specifies the different leakage test methods for sealed sources. It gives a comprehensive set of procedures using radioactive and non-radioactive means.
This document applies to the following situations:
—     leakage testing of test sources following design classification testing in accordance with ISO 2919[1];
—     production quality control testing of sealed sources;
—     periodic inspections of the sealed sources performed at regular intervals, during the working life.
Annex A of this document gives guidance to the user in the choice of the most suitable method(s) according to situation and source type.
It is recognized that there can be circumstances where special tests, not described in this document, are required.
It is emphasized, however, that insofar as production, use, storage and transport of sealed radioactive sources are concerned, compliance with this document is no substitute for complying with the requirements of the relevant IAEA regulations[17] and other relevant national regulations. It is also recognized that countries can enact statutory regulations which specify exemptions for tests, according to sealed source type, design, working environment, and activity (e.g., for very low activity reference sources where the total activity is less than the leakage test limit).

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 20031:2022(Main)
Radiological protection - Monitoring and dosimetry for internal exposures due to wound contamination with radionuclides (ISO 20031:2020)
SIST EN ISO 20031:2022

This document specifies the requirements for personal contamination monitoring and dose assessment following wounds involving radioactive materials. It includes requirements for the direct monitoring at the wound site, monitoring of uptake of radionuclides into the body and assessment of local and systemic doses following the wound event.
It does not address:
—     details of monitoring and assessment methods for specific radionuclides;
—     monitoring and dose assessment for materials in contact with intact skin or pre-existing wounds, including hot particles;
—     therapeutic protocols. However, the responsible entity needs to address the requirements for decontamination and decorporation treatments if appropriate.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 22930-2:2021(Main)
Evaluating the performance of continuous air monitors - Part 2: Air monitors based on flow-through sampling techniques without accumulation (ISO/TR 22930-2:2020)
SIST-TP CEN ISO/TR 22930-2:2021

The use of a continuous air monitor (CAM) is mainly motivated by the need to be alerted quickly and in the most accurate way possible with an acceptable false alarm rate when significant activity concentration value is exceeded, in order to take appropriate measures to reduce exposure of those involved.
The performance of this CAM does not only depend on the metrological aspect characterized by the decision threshold, the limit of detection and the measurement uncertainties but also on its dynamic capacity characterized by its response time as well as on the minimum detectable activity concentration corresponding to an acceptable false alarm rate.
The ideal performance is to have a minimum detectable activity concentration as low as possible associated with a very short response time, but unfortunately these two criteria are in opposition. It is therefore important that the CAM and the choice of the adjustment parameters and the alarm levels be in line with the radiation protection objectives.
This document describes
—     the dynamic behaviour and the determination of the response time,
—     the determination of the characteristic limits (decision threshold, detection limit, limits of the coverage interval), and
—     a possible way to determine the minimum detectable activity concentration and the alarms setup.
Finally the annexes of this document show actual examples of CAM data which illustrate how to quantify the CAM performance by determining the response time, the characteristics limits, the minimum detectable activity concentration and the alarms setup.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day