EN 4165-002:2023
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 002: Specification of performance and contact arrangements
This document defines a number of conditions common to rectangular electrical modular connectors for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating temperature 175 °C.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 002: Leistungsdaten und Kontaktanordnungen
Dieses Dokument legt eine Reihe von allgemeingültigen Bedingungen für elektrische Rechtecksteckverbinder in modularer Bauweise für feste und freie Steckverbinder sowie Einschub- und Gehäusesteckverbinder, mit auswechselbaren Modulen und einer konstanten Betriebstemperatur von 175 °C fest.
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C continu - Partie 002 : Spécification de performances et d'arrangements des contacts
Le présent document spécifie un certain nombre de conditions communes aux connecteurs électriques rectangulaires modulaires pour embases, fiches, racks et panneaux, à modules interchangeables et température d’utilisation de 175 °C continu.
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 002. del: Specifikacija lastnosti in razporeditev kontaktov
Ta dokument določa nabor pogojev, ki so običajni pri pravokotnih električnih modularnih konektorjih za priključne doze in vtiče z zamenljivimi moduli pri stalni delovni temperaturi 175 °C.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2023
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 002. del: Specifikacija lastnosti in razporeditev kontaktov
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 002: Specification of performance and contact arrangements
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C constant - Teil 002: Leistungsdaten und Kontaktanordnungen
Série aérospatiale - Connecteurs modulaires - Température d’utilisation 175 °C continu -
Partie 002: Spécification de performances et arrangement de contacts
Ta slovenski standard je istoveten z: EN 4165-002:2023
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 4165-002
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 4165-002:2015
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
002: Specification of performance and contact
arrangements
Série aérospatiale - Connecteurs modulaires - Luft- und Raumfahrt - Elektrischer
Température d'utilisation 175 °C continu - Partie 002: Rechtecksteckverbinder in modularer Bauweise -
Spécification de performances et arrangement de Betriebstemperatur 175 °C constant - Teil 002:
contacts Leistungsdaten und Kontaktanordnungen
This European Standard was approved by CEN on 24 July 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4165-002:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 6
4 Synoptic . 6
5 Description and codification of shell classes . 6
6 Operating conditions . 7
6.1 Combinations of plugs and receptacles . 7
6.2 Combinations of protective covers and connectors . 7
6.3 Combinations of accessories and connectors . 8
6.4 Combinations of chimneys and accessories . 8
6.5 Permissible cables and maximum permissible current . 8
7 Operating characteristics . 10
7.1 Electrical conditions . 10
7.2 Climatic conditions . 10
7.3 Mechanical conditions . 10
8 Models types . 10
9 Modules contact arrangements – Series 2 and series 3 . 11
10 Contacts . 15
11 Sealing plugs . 16
12 Rear accessories . 16
13 Tooling contacts . 16
14 Tooling accessories for modules . 16
15 Assembly and wiring instructions . 16
Annex A (informative) Synoptic . 17
A.1 Synoptic connectors series II and III, classes F and classes W, 2 and 4 modules . 17
A.2 Synoptic connectors series II, classes J, M and C, 2 and 4 modules . 17
Annex B (informative) Synoptic, single module series II, classes M . 19
Bibliography . 20
European foreword
This document (EN 4165-002:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD STAN, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 4165-002:2015 and EN 4165-002:2015/AC:2016.
EN 4165-002:2015:
— normative references updated;
— Clause 5 Description and codification of shell classes updated;
— Table 5 Chimneys/Accessories combinations: contacts size 23R added;
— 7.1 Electrical conditions updated;
— Non-developed layouts withdrawn (Clause 9);
— Clause 10 Contacts updated;
— Clause 12 Rear accessories updated;
— Clause 13 Tooling contacts updated;
— editorial revision of the document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies a number of conditions common to rectangular electrical modular connectors
for receptacles, plugs and rack and panel, with interchangeable modules and continuous operating
temperature 175 °C.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2591-207, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 207: Voltage proof test
EN 2591-209, Aerospace series — Elements of electrical and optical connection — Test methods —
Part 209: Current temperature derating
EN 3155-082, Aerospace series — Electrical contacts used in elements of connection — Part 082: Contacts,
electrical, female, type A, crimp, class S — Product standard
EN 3197, Aerospace series — Design and installation of aircraft electrical and optical interconnection
systems
EN 4165-001, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 001: Technical specification
EN 4165-003, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 003: Modules series 2 and series 3 — Product standard
EN 4165-004, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 004: Stackable mounting receptacle 2 and 4 modules, series 2 — Product
standard
EN 4165-005, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 005: Stackable mounting receptacle 2 and 4 modules, series 3 — Product
standard
EN 4165-006, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 006: Plug for 2 and 4 modules, series 2 — Product standard
EN 4165-007, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 007: Plug for 2 and 4 modules, series 3 — Product standard
EN 4165-008, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 008: Rack and panel plug for 2 and 4 modules, series 2 — Product standard
EN 4165-009, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 009: Rack and panel plug for 2 and 4 modules, series 3 — Product standard
Published as ASD-STAN Standard at the date of publication of this document by AeroSpace and Defence
industries Association of Europe — Standardization (ASD-STAN), https://www.asd-stan.org/.
EN 4165-010, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 010: Rack and panel rear mounted plug 2 and 4 modules, series 2 — Product
standard
EN 4165-011, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 011: Flange mounting receptacle 2 and 4 modules, series 2 — Product standard
EN 4165-012, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 012: Flange mounting receptacle 2 and 4 modules, series 3 — Product standard
EN 4165-013, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 013: Cable clamp 2 and 4 modules for connectors, series 2 and series 3 — Product
standard
EN 4165-014, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 014: Shielded accessory body, 2 and 4 modules for connectors, series 2 and
series 3 — Product standard
EN 4165-015, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 015: Round chimney for accessory (1 per module cavity), 2 and 4 modules —
Product standard
EN 4165-016, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 016: Double oval chimney for accessory (1 per 2 modules) — Product standard
EN 4165-017, Aerospace series — Connectors, electrical, rectangular, modular — Operating temperature
175 °C continuous — Part 017: Blank chimney for accessory (1 per module cavity) — Product standard
EN 4165-018, Aeros
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.