EN 1408:2008

Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)

This European Standard is applicable to poly (diallyldimethylammonium chloride) used for treatment of water intended for human consumption. It describes the characteristics of poly (diallyldimethylammonium chloride) and specifies the requirements and the corresponding test methods for poly (diallyldimethylammonium chloride). It gives information on its use in water treatment.

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Poly (diallyldimethylammoniumchlorid)

Diese Europäische Norm gilt für Poly(diallyldimethylammoniumchlorid) zur Aufbereitung von Wasser für den menschlichen Gebrauch. Sie beschreibt die Eigenschaften von Poly(diallyldimethylammoniumchlorid) und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Poly(diallyldimethylammoniumchlorid) fest. Sie gibt Informationen für seine Anwendung in der Wasseraufbereitung.

Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Poly (chlorure de diméthyldiallylammonium)

La présente Norme européenne est applicable au poly(chlorure de diméthyldiallylammonium) utilisé pour le
traitement de l'eau destinée à la consommation humaine. Elle décrit les caractéristiques et spécifie les
exigences et les méthodes d'essai correspondantes pour le poly(chlorure de diméthyldiallylammonium). Elle
donne des informations pour son emploi dans le traitement de l'eau.

Kemikalije, ki se uporabljajo za pripravo pitne vode - Poli (dialildimetil amonijev klorid)

General Information

• Status: Withdrawn
• Publication Date: 29-Jan-2008
• Withdrawal Date: 10-Oct-2023
• ICS: 71.100.80 - Chemicals for purification of water
• Technical Committee: CEN/TC 164 - Water supply
• Drafting Committee: CEN/TC 164/WG 9 - Drinking water treatment
• Ref Project: SIST EN 1408:2008 - Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)

Relations

• Replaces: EN 1408:1998 - Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)
• Effective Date: 22-Dec-2008
• Replaced By: EN 1408:2023 - Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode - Poli (dialildimetil amonijev klorid)Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Poly (diallyldimethylammoniumchlorid)Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Poly (chlorure de diméthyldiallylammonium)Chemicals used for treatment of water intended for human consumption - Poly (diallyldimethylammonium chloride)71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 1408:2008SIST EN 1408:2008en,fr,de01-april-2008SIST EN 1408:2008SLOVENSKI
STANDARDSIST EN 1408:19991DGRPHãþD



SIST EN 1408:2008



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1408January 2008ICS 71.100.80Supersedes EN 1408:1998
English VersionChemicals used for treatment of water intended for humanconsumption - Poly (diallyldimethylammonium chloride)Produits chimiques utilisés pour le traitement de l'eaudestinée à la consommation humaine - Poly (chlorure dediméthyldiallylammonium)Produkte zur Aufbereitung von Wasser für denmenschlichen Gebrauch - Poly (diallyldimethylammoniumchlorid)This European Standard was approved by CEN on 10 November 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1408:2007: ESIST EN 1408:2008



EN 1408:2008 (E) 2 Contents Page Foreword.4 Introduction.5 1 Scope.6 2 Normative references.6 3 Description.6 3.1 Identification.6 3.1.1 Chemical name.6 3.1.2 Synonyms or common names.6 3.1.3 Relative molecular mass.6 3.1.4 Empirical formula.6 3.1.5 Chemical formula.7 3.1.6 CAS Registry Number ).7 3.1.7 EINECS reference ).7 3.2 Commercial form.7 3.3 Physical properties.
...