71.100.80 - Chemicals for purification of water
ICS 71.100.80 Details
Chemicals for purification of water
Chemikalien zur Wasseraufbereitung
Produits chimiques pour la purification de l'eau
Kemikalije za čiščenje vode
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 71.100.80 - Chemicals for purification of water
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
The European standards on “In-situ generation and dosing devices of biocides for water treatment” will specify product characteristics and operational schemes. Assessment methods and test specifications for the devices will be described. Furthermore risk notes and mitigation measures will be covered by the standards.
Scope of application of the devices will not be limited to the treatment of drinking water and/or swimming pool water. Scope of application will be treatment of water, covering different kind of water qualities and treatment for different uses of water (drinking, swimming, cooling, etc.).
- Standard39 pagesEnglish languagesale 10% offe-Library read for1 day
This European Standard specifies the characteristics and the requirements for sulfamic acids and salts.
Similar to antiscalants as phosphonic acids and its salts (EN 15040) and polycarboxylates and its salts (EN 15039), sulfamic acid and its salts can be used alone or in combination with others drinking water substances as antifoulants (antiscalant effect) for membranes for the treatment of water intended for human consumption.
Sulfamic acid and salts are used in mixtures with sodium hydroxide and sodium hypochlorite or other drinking water chlorine based oxidizing agents as biofilm remover especially for reverse osmosis (RO) and nanofiltration membranes to prevent biofouling by microbiological contamination. The components will not pass the membrane and are rejected to the wastewater with the concentrate. For the other components EN standards are already exist.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sulphamic acid used as antifoulant for membranes in the treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding analytical methods for sulphamic acid. It gives information on their use as antifoulant for membranes in water treatment in Annex A.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines the minimum requirements for treatment systems, which generate the active substance - "Active chlorine" - from sodium chloride by electrolysis for on-site (in-situ) operation.
The in-situ generated active substance (IGAS), in this case active chlorine, may be put into a solution ("off-line") or directly generated in the pipes ("in-line").
This document specifies the device construction, and test methods for the equipment used for in-situ generation of active chlorine. It specifies requirements for instructions for installation, operation, maintenance, safety and for documentation to be provided with the product.
The in-situ generation of active substances and the placing of their precursors on the EU market are subject to the specifications of the Biocidal Products Regulation (EU) 528/2012 ["Biocidal products"]). Active substances, generated by devices, which are claiming compliance with this document, shall comply with the BPR for both the registered active chlorine, quality standards and the precursor in accordance with appropriate application and "Product Type" as listed in the BPR.
This standard does not identify applications for in situ devices for generation of active chlorine. The range of applications for in-situ generation of chlorine is diverse. It is the responsibility of the economic operator/product supplier, claiming compliance with this standard, to identify the appropriate system type and operating conditions for the specific application and to:
- specify the quality of the biocide appropriate to the application. This may be defined in national or international standards;
- specify the appropriate product type (see Clause 7) and operating conditions (concentration, dosage rate and quality of the active chlorine);
- specify any other regulatory requirements relevant to the specific application;
- specify the appropriate precursor sodium chloride (natural or artificial brine), for the application;
- and to label the product accordingly.
- Standard43 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to cationic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of cationic polyacrylamides and specifies the requirements and the corresponding test methods for cationic polyacrylamides. It gives information on their use in water treatment.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to polyamines used for treatment of water intended for human consumption. It describes the characteristics of polyamines and specifies the requirements and the corresponding test methods for polyamines. It gives information on their use in water treatment.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium alginate used for treatment of water intended for human consumption. It describes the characteristics of sodium alginate and specifies the requirements and the corresponding test methods for sodium alginate. It gives information on their use in water treatment.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to anionic and non-ionic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and the corresponding test methods for anionic and non-ionic polyacrylamides. It gives information on their use in water treatment.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to poly (diallyldimethylammonium chloride) used for treatment of water intended for human consumption. It describes the characteristics of poly (diallyldimethylammonium chloride) and specifies the requirements and the corresponding test methods for poly (diallyldimethylammonium chloride). It gives information on their use in water treatment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to polyamines used for treatment of water intended for human consumption. It describes the characteristics of polyamines and specifies the requirements and the corresponding test methods for polyamines. It gives information on their use in water treatment.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to anionic and non-ionic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and the corresponding test methods for anionic and non-ionic polyacrylamides. It gives information on their use in water treatment.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium alginate used for treatment of water intended for human consumption. It describes the characteristics of sodium alginate and specifies the requirements and the corresponding test methods for sodium alginate. It gives information on their use in water treatment.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to cationic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of cationic polyacrylamides and specifies the requirements and the corresponding test methods for cationic polyacrylamides. It gives information on their use in water treatment.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to poly(diallyldimethylammonium chloride) used for treatment of water intended for human consumption. It describes the characteristics of poly(diallyldimethylammonium chloride) and specifies the requirements and the corresponding test methods for poly(diallyldimethylammonium chloride). It gives information on their use in water treatment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) sulfate solid used for treatment of water intended for human consumption. It describes the characteristics of iron (III) sulfate solid and specifies the requirements and the corresponding analytical methods for iron (III) sulfate solid and gives information on its use in water treatment. It also determines the rules relating to safe handling and use of iron (III) sulfate solid.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) sulfate solid used for treatment of water intended for human consumption. It describes the characteristics of iron (III) sulfate solid and specifies the requirements and the corresponding analytical methods for iron (III) sulfate solid and gives information on its use in water treatment. It also determines the rules relating to safe handling and use of iron (III) sulfate solid.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) sulfate solution of various iron and/or acid contents (see 3.2) used for treatment of water intended for human consumption. It describes the characteristics of iron (III) sulfate solution and specifies the requirements and the corresponding analytical methods for iron (III) sulfate solution (analytical methods are given in Annex B) and gives information on its use in water treatment. It also determines the rules relating to safe handling and use of iron (III) sulfate solution (see Annex E).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (II) sulfate heptahydrate used for treatment of water intended for human consumption. It describes the characteristics of iron (II) sulfate heptahydrate and specifies the requirements and the corresponding analytical methods for iron (II) sulfate heptahydrate (analytical methods are given in Annex B) and gives information on its use in water treatment.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) chloride (a), iron (III) chloride hexahydrate (b), iron (III) chloride solution (c) used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding analytical methods for iron (III) chlorides (a), (b) and (c) and gives information for their use in water treatment.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) chloride sulfate used for treatment of water intended for human consumption. It describes the characteristics of iron (III) sulfate and specifies the requirements and the corresponding analytical methods for iron (III) chloride sulfate and gives information on its use in water treatment. It also determines the rules relating to safe handling and use of iron (III) chloride sulfate.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (II) sulfate heptahydrate and iron (II) sulfate monohydrate used for treatment of water intended for human consumption. It describes the characteristics of iron (II) sulfate heptahydrate and monohydrate, specifies the requirements and the corresponding analytical methods and gives information on their use in water treatment. It also determines the rules relating to safe handling and use of iron (II) sulfate.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) chloride solution a) and iron (III) chloride hexahydrate b) used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding analytical methods for iron (III) chlorides a) and b) and gives information for their use in water treatment. It also determines the rules relating to safe handling and use of iron (III) chloride.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) sulfate solution of various iron and/or acid contents (see 4.2) used for treatment of water intended for human consumption. It describes the characteristics of iron (III) sulfate solution and specifies the requirements and the corresponding analytical methods for iron (III) sulfate solution and gives information on its use in water treatment. It also determines the rules relating to safe handling and use of iron (III) sulfate solution.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron (III) chloride sulfate used for treatment of water intended for human consumption. It describes the characteristics of iron (III) chloride sulfate and specifies the requirements and the corresponding analytical methods for iron (III) chloride sulfate and gives information on its use in water treatment. It also determines the rules relating to safe handling and use of iron (III) chloride sulfate.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to filter media (virgin granular activated carbon, silica sand and silica gravel, pumice, pyrolyzed coal material, anthracite and calcium carbonate) used for filtration of swimming pool water, with or without chemical action. It describes the characteristics of filter media and specifies the requirements and the corresponding test methods for filter media. It gives information on their use in swimming pool water treatment.
This document does not concern powdered diatomaceous earth, perlite, zeolite and any other filter media used with filter cartridges or similar filter elements.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to aluminium based coagulants (aluminium sulfate, aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric), aluminium chloride hydroxide sulfate (monomeric), sodium aluminate and polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate) used directly or for the production of formulations for treatment of water for swimming pools.
It describes the characteristics of aluminium based coagulants and specifies the requirements and the corresponding test methods for aluminium based coagulants. It gives information on their use in swimming pool water treatment. It also determines the rules relating to safe handling and use (see Annex B).
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to powdered activated carbon used for treatment of swimming pool water. It describes the characteristics of powdered activated carbon and specifies the requirements and the corresponding test methods for powdered activated carbon. It gives information on its use in swimming pool water treatment.
- Standard11 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sulfuric acid used for treatment of water intended for human consumption. It describes the characteristics of sulfuric acid and specifies the requirements and the corresponding test methods for sulfuric acid. It gives information on its use in water treatment.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to calcium hypochlorite used directly, or for the production of formulations, for treatment of water for swimming pools. It describes the characteristics of calcium hypochlorite and specifies the requirements and the corresponding test methods for calcium hypochlorite. It gives information on its use in swimming pool water treatment. It also determines the rules relating to safe handling and use of calcium hypochlorite (see Annex B).
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron based coagulants (iron (III) chloride, iron (III) chloride sulfate and iron (III) sulfate liquid) used directly or for the production of formulations for treatment of water for swimming pools.
It describes the characteristics of iron based coagulants and specifies the requirements and the corresponding test methods for iron based coagulants. It gives information on their use in swimming pool water treatment. General information on iron based coagulants is given in Annex A.
It also determines the rules relating to safe handling and use (see Annex B).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium hexafluorosilicate used for treatment of water intended for human consumption. It describes the characteristics of sodium hexafluorosilicate and specifies the requirements and the corresponding test methods for sodium hexafluorosilicate. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use of sodium hexafluorosilicate (see Annex B).
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium thiosulfate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of sodium thiosulfate and refers to the corresponding analytical methods. It gives information for its use in water treatment.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium sulfite used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of sodium sulfite and refers to the corresponding analytical methods. It gives information for its use in water treatment.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium chloride intended for on-site electrochlorination of water intended for human consumption using non-membrane technology. It describes the characteristics and specifies the requirements and the corresponding test methods for sodium chloride (see Annex B). It gives information on its use in water treatment.
- Standard35 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to liquefied ammonia used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of liquefied ammonia and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to the safe handling and use of liquefied ammonia (see Annex B).
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to ammonium chloride used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonium chloride and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to safe handling and use of ammonium chloride (see Annex B).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to ammonium sulfate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonium sulfate and refers to the corresponding analytical methods. It gives information on its use in water treatment.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to hexafluorosilicic acid used for treatment of water intended for human consumption. It describes the characteristics of hexafluorosilicic acid and specifies the requirements and the corresponding test methods for hexafluorosilicic acid. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use of hexafluorosilicic acid (see Annex B).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium hydrogen sulfite used for treatment of water intended for human consumption. It describes the characteristics of sodium hydrogen sulfite and specifies the requirements and the corresponding test methods for sodium hydrogen sulfite. It gives information on its use in water treatment.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium chloride intended for on-site electrochlorination of water intended for human consumption using membrane cells. It describes the characteristics and specifies the requirements and the corresponding test methods for sodium chloride (see Annex B). It gives information on its use in water treatment.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium disulfite used for treatment of water intended for human consumption. It describes the characteristics of sodium disulfite and specifies the requirements and the corresponding test methods for sodium disulfite. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use (see Annex B).
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to filter media (virgin granular activated carbon, silica sand and silica gravel, pumice, pyrolyized coal material, anthracite and calcium carbonate) used for treatment of swimming pool water. It describes the characteristics of filter media and specifies the requirements and the corresponding test methods for filter media. It gives information on their use in swimming pool water treatment.
This document does not concern powdered diatomaceous earth, perilite, zeolite and similar materials used with filter cartridges.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sulfuric acid used for treatment of water intended for human consumption. It describes the characteristics of sulfuric acid and specifies the requirements and the corresponding test methods for sulfuric acid. It gives information on its use in water treatment.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to iron based coagulants (iron (III) chloride, iron (III) chloride sulfate and iron (III) sulfate liquid) used directly or for the production of formulations for treatment of water for swimming pools.
It describes the characteristics of iron based coagulants and specifies the requirements and the corresponding test methods for iron based coagulants. It gives information on their use in swimming pool water treatment. General information on iron based coagulants is given in Annex A.
It also determines the rules relating to safe handling and use (see Annex B).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to calcium hypochlorite used directly, or for the production of formulations, for treatment of water for swimming pools. It describes the characteristics of calcium hypochlorite and specifies the requirements and the corresponding test methods for calcium hypochlorite. It gives information on its use in swimming pool water treatment. It also determines the rules relating to safe handling and use of calcium hypochlorite (see Annex B).
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to aluminium based coagulants (aluminium sulfate, aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric), aluminium chloride hydroxide sulfate (monomeric), sodium aluminate and polyaluminium chloride hydroxide and polyaluminium chloride hydroxide sulfate) used directly or for the production of formulations for treatment of water for swimming pools.
It describes the characteristics of aluminium based coagulants and specifies the requirements and the corresponding test methods for aluminium based coagulants. It gives information on their use in swimming pool water treatment. It also determines the rules relating to safe handling and use (see Annex B).
- Standard30 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to ammonium chloride used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonium chloride and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also determines the rules relating to safe handling and use of ammonium chloride (see Annex B).
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium thiosulfate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of sodium thiosulfate and refers to the corresponding analytical methods. It gives information for its use in water treatment.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to sodium hexafluorosilicate used for treatment of water intended for human consumption. It describes the characteristics of sodium hexafluorosilicate and specifies the requirements and the corresponding test methods for sodium hexafluorosilicate. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use of sodium hexafluorosilicate (see Annex B).
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This document is applicable to hexafluorosilicic acid used for treatment of water intended for human consumption. It describes the characteristics of hexafluorosilicic acid and specifies the requirements and the corresponding test methods for hexafluorosilicic acid. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use of hexafluorosilicic acid (see Annex B).
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day