EN 10223-3:2013
(Main)Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
This European Standard specifies requirements for the dimensions, coatings, test methodology and delivery conditions of steel wire mesh products having meshes of hexagonal shape specified for engineering purposes.
Stahldraht und Drahterzeugnisse für Zäune und Drahtgeflechte - Teil 3: Stahldrahtgeflecht mit sechseckigen Maschen für bauwirtschaftliche Zwecke
Diese Europäische Norm legt Anforderungen an die Maße, Überzüge, Prüfverfahren und Lieferbedingungen von Erzeugnissen aus Stahldrahtgeflecht mit sechseckigen Maschen für bauwirtschaftliche Zwecke fest.
Fils et produits tréfilés en acier pour clôtures et grillages - Partie 3: Produits en grillage à mailles hexagonales en acier pour applications en génie civil
La présente Norme européenne spécifie les prescriptions relatives aux dimensions, revêtements, méthode de contrôle et conditions de livraison des produits en grillage à mailles de forme hexagonale en fils d’acier, pour applications en génie civil.
Jeklena žica in žični izdelki za ograje in mreže - 3. del: Jeklene pletene mreže s šesterokotnimi zankami za uporabo v gradbeništvu
Ta evropski standard določa zahteve za dimenzije, prevleke, preskusno metodologijo in dobavne pogoje za jeklene pletene mreže s šesterokotnimi zankami, namenjene za uporabo v gradbeništvu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahldraht und Drahterzeugnisse für Zäune und Drahtgeflechte - Teil 3: Stahldrahtgeflecht mit sechseckigen Maschen für bauwirtschaftliche ZweckeFils et produits tréfilés en acier pour clôtures et grillages - Partie 3: Produits en grillage à mailles hexagonales en acier pour applications industriellesSteel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes91.090Konstrukcije zunaj stavbExternal structures77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chainsICS:Ta slovenski standard je istoveten z:EN 10223-3:2013SIST EN 10223-3:2014en,fr,de01-januar-2014SIST EN 10223-3:2014SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10223-3
December 2013 ICS 77.140.65 Supersedes EN 10223-3:1997English Version
Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes
Fils et produits tréfilés en acier pour clôtures et grillages - Partie 3: Produits en grillage à mailles hexagonales en acierpour applications en génie civil
Stahldraht und Drahterzeugnisse für Zäune und Drahtgeflechte - Teil 3: Stahldrahtgeflecht mit sechseckigen Maschen für bauwirtschaftliche Zwecke This European Standard was approved by CEN on 29 June 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10223-3:2013 ESIST EN 10223-3:2014
Description of environment of installation site, coating wire requirements . 21 Bibliography . 24
Key M
calculated average value after measuring the distance between two twisted sides over ten meshes Figure 1 – Mesh size 3.2 double twisted hexagonal mesh
hexagonal-netting consisting of hexagonal shaped meshes, formed by twisting adjacent wires two by two, alternatively forming a twist to the right and to the left 3.3 mesh designations definition of the hexagonal mesh type related to typical dimension of mesh Note 1 to entry: Example of mesh designation: 8 x 10. 3.4 twist tight winding of two wires around each other measured as each revolution of the two wires over 180° Note 1 to entry: The wires rotate only in one direction. 3.5 hexagonal steel wire mesh in rolls mesh to be used for rockfall and slope protections Note 1 to entry: The netting is a longitudinal border composed of a single selvedge wire: this wire has a greater diameter than that used for the net (see Figure 2). SIST EN 10223-3:2014
Key W width Figure 2 – Mesh in rolls SIST EN 10223-3:2014
3.6 gabion double twisted steel wire mesh box made with a base panel and lateral side, see Figure 3a) (and eventually internal diaphragms, see Figure 3b)), connected together according to manufacturer's recommendations
a)
b) Key 1 lid 2 diaphragms 3 end panels H height L length W width The end external borders of base panel shall have a selvedge wire with a diameter greater than the one used for the longitudinal reinforcement. The lid of the structure can be made with a detached double twisted steel wire mesh panel. Figure 3 — Example of gabion without diaphragm a) and example of gabion with diaphragm b) SIST EN 10223-3:2014
Key 1 lid 2 diaphragms H height L length W width Figure 4 – Mattress 3.8 sack gabions cylindrical double twisted steel wire mesh unit with a lateral opening to allow the stone filling on job site
Key 1 filling 2 lacing wire D diameter of the sack gabions L length of the sack gabions Figure 5 – Example of sack gabions SIST EN 10223-3:2014
length of zinc or zinc-aluminium coated steel wire for use with the equivalent corrosion protection of the gabions or organic coated or stainless steel for organic coated mesh wire used for support by forming a diagonal brace across the corners, inside of the gabion container 3.10 lacing wire for gabions and gabion mattresses; steel wire coated with zinc, zinc-aluminium alloy or organic over-coating, stainless steel wire used to assemble and interconnect empty gabions and to close and secure units filled with stone, as a replacement for spiral binders or rings and also used as bracing tie to prevent face deformation
Figure 6 — Lacing wire 3.11 gabion ring C-shaped ring, made from very high resistance zinc or zinc-aluminium alloy coated steel wire or stainless steel wire, used to assemble and interconnect the empty gabions and to close and secure the units filled with stone
Figure 7 — Rings 3.12 soil reinforcement units for retaining structure double twisted steel wire mesh units used for soil reinforced structures and slope consolidation Note 1 to entry: For structures with vertical facing (see Figure 8), units are made with a hexagonal wire mesh continuous base panel for the reinforcement and the facing portion of the structure. SIST EN 10223-3:2014
Key 1 diaphragm 2 base panel H height L length L1 thickness of the facing W width Figure 8 – Example of units for vertical facing structures
Key . variable between 20° and 45° Figure 9 — Example of a soil reinforcement unit with an inclined vegetative facing 4 Information to be supplied by the purchaser The following information shall be supplied by the purchaser at the time of enquiry and order: a) number of this European Standard; b) quantity and type of designation (for box gabions with or without diaphragms); SIST EN 10223-3:2014
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.