iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 25377:2022

(Main)

Hydrometric uncertainty guidance (HUG) (ISO 25377:2020)

Hydrometric uncertainty guidance (HUG) (ISO 25377:2020)

This document provides an understanding of the nature of measurement uncertainty and its significance in estimating the "quality" of a measurement or a determination in hydrometry.
This document is applicable to flow measurements in natural and man-made channels. Rainfall measurements are not covered.

Leitfaden zu Messunsicherheiten in der Hydrometrie (HUG) (ISO 25377:2020)

Dieses Dokument bietet einen Beitrag zum Verständnis der Natur der Messunsicherheit und deren Bedeutung bei der Abschätzung der „Qualität“ einer Messung oder einer Bestimmung in der Hydrometrie.
Dieses Dokument ist anwendbar für Abflussmessungen in natürlichen und künstlichen Gerinnen. Messungen der Niederschlagsmenge werden nicht berücksichtigt.

Lignes directrices relatives à l'incertitude en hydrométrie (ISO 25377:2020)

Navodila za določanje merilne negotovosti v hidrometriji (HUG) (ISO 25377:2020)

Ta dokument pojasnjuje naravo merilne negotovosti in njenega pomena pri ocenjevanju »kakovosti« meritev ali določanja v hidrometriji.
Ta dokument se uporablja za merjenje pretoka v naravnih in umetnih kanalih. Dokument ne zajema merjenja količine padavin.

General Information

Status
Published
Publication Date
20-Dec-2022
ICS
17.120.20 - Flow in open channels
Technical Committee
CEN/TC 318 - Hydrometry
Drafting Committee
CEN/TC 318 - Hydrometry
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
21-Dec-2022
Due Date
07-Nov-2024
Completion Date
21-Dec-2022
Ref Project
SIST EN ISO 25377:2023 - Hydrometric uncertainty guidance (HUG) (ISO 25377:2020)

Relations

Replaces
CEN ISO/TS 25377:2007 - Hydrometric uncertainty guidance (HUG) (ISO/TS 25377:2007)
Effective Date
29-Mar-2023

Buy Standard

EN ISO 25377:2023EN ISO 25377:2023
PreviousNext
Standard
EN ISO 25377:2023
English language
80 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25377:2023
01-marec-2023
Navodila za določanje merilne negotovosti v hidrometriji (HUG) (ISO 25377:2020)
Hydrometric uncertainty guidance (HUG) (ISO 25377:2020)
Leitfaden zu Messunsicherheiten in der Hydrometrie (HUG) (ISO 25377:2020)
Lignes directrices relatives à l'incertitude en hydrométrie (ISO 25377:2020)
Ta slovenski standard je istoveten z: EN ISO 25377:2022
ICS:
17.120.20 Pretok v odprtih kanalih Flow in open channels
SIST EN ISO 25377:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 25377:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 25377:2023


EN ISO 25377
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2022
EUROPÄISCHE NORM
ICS 17.120.20
English Version

Hydrometric uncertainty guidance (HUG) (ISO
25377:2020)
Lignes directrices relatives à l'incertitude en Leitfaden zu Messunsicherheiten in der Hydrometrie
hydrométrie (ISO 25377:2020) (HUG) (ISO 25377:2020)
This European Standard was approved by CEN on 20 December 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25377:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 25377:2023
EN ISO 25377:2022 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 25377:2023
EN ISO 25377:2022 (E)
European foreword
The text of ISO 25377:2020 has been prepared by Technical Committee ISO/TC 113 "Hydrometry” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 25377:2022
by Technical Committee CEN/TC 318 “Hydrometry” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2023, and conflicting national standards shall be
withdrawn at the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 25377:2020 has been approved by CEN as EN ISO 25377:2022 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 25377:2023

---------------------- Page: 6 ----------------------
SIST EN ISO 25377:2023
INTERNATIONAL ISO
STANDARD 25377
First edition
2020-12
Hydrometric uncertainty guidance
(HUG)
Lignes directrices relatives à l'incertitude en hydrométrie
Reference number
ISO 25377:2020(E)
©
ISO 2020

---------------------- Page: 7 ----------------------
SIST EN ISO 25377:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 17993:2023(Main)
Calibration and accuracy of non-catching precipitation measurement instruments
SIST-TP CEN/TR 17993:2023

Non-catching type gauges are the emerging class of in situ precipitation measurement instruments. For these instruments, rigorous testing and calibration are more challenging than for traditional gauges. Hydrometeors’ characteristics like particle size, shape, fall velocity and density need to be reproduced in a controlled environment to provide the reference precipitation, instead of the equivalent water flow used for catching-type gauges. They are generally calibrated by the manufacturers using internal procedures developed for the specific technology employed. No agreed methodology exists, and the adopted procedures are rarely traceable to internationally recognized standards. This document describes calibration and accuracy issues of non-catching instruments used for liquid/solid atmospheric precipitation measurement. An overview of the existing models of non-catching type instruments is included, together with an overview and a description of their working principles and the adopted calibration procedures. The literature and technical manuals disclosed by manufacturers are summarized and discussed, while current limitations and metrological requirements are identified.

  • Technical report
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17694-2:2023(Main)
Hydrometry - Minimum performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 2: Closed conduit instrumentation
SIST EN 17694-2:2023

This document specifies general requirements, minimum performance requirements and test procedures for instrumentation used to measure either volumetric flow-rate and/or total volume passed of water in closed conduits. It covers all closed conduit instrument (CCI) technologies intended to operate in closed pressurized pipes and partially filled pipes. Requirements are expressed in volumetric units which may be converted to mass using the density of the water.
It is recognized that for some CCIs certain tests cannot be carried out.
The data obtained from the testing of CCIs in accordance with the requirements of the Measuring Instruments Directive [1] or EN ISO 4064-1 [2] can be used to meet, in part, the requirements specified in this document. However, for the avoidance of doubt, compliance with the requirements of this document does not equate to compliance with the requirements of the Measuring Instruments Directive or EN ISO 4064-1.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17694-1:2023(Main)
Hydrometry - Minimum performance requirements and test procedures for water monitoring equipment - Devices for the determination of flow - Part 1: Open channel instrumentation
SIST EN 17694-1:2023

This document specifies general requirements, minimum performance requirements and test procedures for open channel instrumentation used to determine either volumetric flow-rate and/or total volume passed of waters in artificial open channels. It covers the following technology categories:
- Level sensors with associated electronics designed to be used with a conventional gauging structure. (The requirements and test procedures for gauging structures, such as weirs and flumes, are excluded. The stage discharge characteristics for many of these structures are established and published in national and international standards).
- Water velocity sensors.
- Integrated velocity area instruments comprising level and velocity sensors that may be separate or combined in a single assembly.
- Velocity sensors that determine the mean water velocity through a channel.
It is recognized that for some OCIs, certain tests cannot be carried out.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4373:2022(Main)
Hydrometry - Water level measuring devices (ISO 4373:2022)
SIST EN ISO 4373:2022

This document specifies the functional requirements of instrumentation for measuring the level of water surface (stage), primarily for the purpose of determining flow rates.
This document is supplemented by Annex A, which provides guidance on the types of automatic water level measurement devices currently available and the measurement uncertainty associated with them. The manually operated measuring devices are described in Annex B.
This document is applicable to both contact and non-contact methods of measurement. The non-contact methods are not in direct material contact with the water surface but measure the height of the water level with ultrasonic or electromagnetic waves.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 772:2022(Main)
Hydrometry - Vocabulary and symbols (ISO 772:2022)
SIST EN ISO 772:2022

This document defines terms and symbols used in standards in the field of hydrometry.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 748:2021(Main)
Hydrometry - Measurement of liquid flow in open channels - Velocity area methods using point velocity measurements (ISO 748:2021)
SIST EN ISO 748:2022

This document specifies methods for determining the velocity and cross-sectional area of water flowing in open channels and for calculating the discharge employing point velocity measurement devices.
It is applicable to methods using rotating-element current meters, acoustic doppler velocimeters (ADVs), acoustic doppler current profiler (ADCP) stationary method, surface velocity measurement including floats and other surface velocity systems.
Although some general procedures are discussed, this document does not describe in detail how to use or deploy these systems.
NOTE         For detailed procedures, refer to guidelines from instrument manufacturers and the appropriate public agencies.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6416:2017(Main)
Hydrometry - Measurement of discharge by the ultrasonic transit time (time of flight) method (ISO 6416:2017)
SIST EN ISO 6416:2018

ISO 6416 describes the establishment and operation of an ultrasonic (transit-time) gauging station for the continuous measurement of discharge in a river, an open channel or a closed conduit. It also describes the basic principles on which the method is based, the operation and performance of associated instrumentation and procedures for commissioning.
It is limited to the "transit time of ultrasonic pulses" technique, and is not applicable to systems that make use of the "Doppler shift" or "correlation" or "level-to-flow" techniques.
ISO 6416 is not applicable to measurement in rivers with ice.
NOTE       ISO 6416 focuses on open channel flow measurement. IEC 60041 covers the use of the technique for full pipe flow measurement.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4375:2014(Main)
Hydrometry - Cableway systems for stream gauging (ISO 4375:2014)
SIST EN ISO 4375:2015

ISO 4375:2014 defines the requirements for equipment, anchorage, supports and accessories for cableway systems for use in stream gauging. Systems which are operated either entirely from the river bank or from a suspended personnel carriage (also called a "cable car") are discussed. Should the cableway installation be required to be certified as lifting equipment, other standards or regulations may apply. ISO 4375:2014 is only applicable to the cableway systems to be used for hydrometric measurements.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18365:2013(Main)
Hydrometry - Selection, establishment and operation of a gauging station (ISO 18365:2013)
SIST EN ISO 18365:2014

ISO 18365:2013 gives requirements for the establishment and operation of a gauging station for the measurement of stage, or stage and discharge, of a lake, reservoir, river or canal or other artificial open channel. It also describes how a gauging station utilising one of the measurement methods listed should be operated and maintained.
Requirements are provided for stage only measurement stations, stage-discharge stations and direct-discharge measurement stations in natural channels, as well as for stage-discharge stations with artificial structures. Additionally, some requirements are given for measurements under difficult conditions, such as under ice conditions.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17993:2023(Main)
Calibration and accuracy of non-catching precipitation measurement instruments
SIST-TP CEN/TR 17993:2023

Non-catching type gauges are the emerging class of in situ precipitation measurement instruments. For these instruments, rigorous testing and calibration are more challenging than for traditional gauges. Hydrometeors’ characteristics like particle size, shape, fall velocity and density need to be reproduced in a controlled environment to provide the reference precipitation, instead of the equivalent water flow used for catching-type gauges. They are generally calibrated by the manufacturers using internal procedures developed for the specific technology employed. No agreed methodology exists, and the adopted procedures are rarely traceable to internationally recognized standards. This document describes calibration and accuracy issues of non-catching instruments used for liquid/solid atmospheric precipitation measurement. An overview of the existing models of non-catching type instruments is included, together with an overview and a description of their working principles and the adopted calibration procedures. The literature and technical manuals disclosed by manufacturers are summarized and discussed, while current limitations and metrological requirements are identified.

  • Technical report
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day