prEN ISO 19403-6

Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO/DIS 19403‑6:2023)

ISO 19403-6:2017 specifies a method to measure the dynamic contact angle with an optical method. The advancing and the receding angles are determined.
By means of this defined measurement, the wetting and dewetting properties can be characterized. It can also be concluded on the morphological and chemical homogeneity of interfaces.

Beschichtungsstoffe - Benetzbarkeit - Teil 6: Messung des dynamischen Kontaktwinkels (ISO/DIS 19403‑6:2023)

Peintures et vernis - Mouillabilité - Partie 6: Mesurage de l'angle de contact dynamique (ISO/DIS 19403‑6:2023)

Le présent document spécifie une méthode permettant de mesurer l'angle de contact dynamique à l'aide d'une méthode optique. Les angles d'avancée et de recul sont déterminés.
Grâce à cette mesure définie, les propriétés de mouillage et de démouillage peuvent être caractérisées. Il est également possible de tirer des conclusions quant à l'homogénéité morphologique et chimique des interfaces.

Barve in laki - Omočljivost - 6. del: Merjenje dinamičnega stičnega kota (ISO/DIS 19403-6:2023)

General Information

• Status: Not Published
• Publication Date: 31-Dec-2024
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 25-Apr-2024
• Completion Date: 25-Apr-2024
• Ref Project: oSIST prEN ISO 19403-6:2024 - Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO/DIS 19403-6:2023)

Relations

• Revises: EN ISO 19403-6:2020 - Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle (ISO 19403-6:2017)
• Effective Date: 21-Jun-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 19403-6:2024
01-januar-2024
Barve in laki - Omočljivost - 6. del: Merjenje dinamičnega stičnega kota (ISO/DIS
19403-6:2023)
Paints and varnishes - Wettability - Part 6: Measurement of dynamic contact angle
(ISO/DIS 19403-6:2023)
Beschichtungsstoffe - Benetzbarkeit - Teil 6: Messung des dynamischen Kontaktwinkels
(ISO/DIS 19403-6:2023)
Peintures et vernis - Mouillabilité - Partie 6: Mesurage de l'angle de contact dynamique
(ISO/DIS 19403-6:2023)
Ta slovenski standard je istoveten z: prEN ISO 19403-6
ICS:
87.040 Barve in laki Paints and varnishes
oSIST prEN ISO 19403-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 19403-6:2024

---------------------- Page: 2 ----------------------
oSIST prEN ISO 19403-6:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19403-6
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-09-25 2023-12-18
Paints and varnishes — Wettability —
Part 6:
Measurement of dynamic contact angle
Peintures et vernis — Mouillabilité —
Partie 6: Mesurage de l'angle de contact dynamique
ICS: 87.040
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19403-6:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 19403-6:2024
ISO/DIS 19403-6:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19403-6
ISO/TC 35/SC 9 Secretariat: BSI
Voting begins on: Voting terminates on:

Paints and varnishes — Wettability —
Part 6:
Measurement of dynamic contact angle
Peintures et vernis — Mouillabilité —
Partie 6: Mesurage de l'angle de contact dynamique
ICS: 87.040
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 19403-6:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 19403-6:2024
ISO/DIS 19403-6:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references .
...