EN ISO 2811-3:2023

Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)

ISO 2811-3:2011 specifies a method for determining the density of paints, varnishes and related products using an oscillator.
The method is suitable for all materials, including paste-like coatings. If a pressure-resistant type of apparatus is used, the method is also applicable to aerosols.

Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811-3:2023)

Dieses Dokument legt ein Verfahren zum Bestimmen der Dichte von Beschichtungsstoffen und ähnlichen Produkten mit einem Schwingungs-Dichtemesser fest.
Das Verfahren ist für alle Beschichtungsstoffe einschließlich pastenförmiger anwendbar. Wenn eine druckfeste Ausführung des Gerätes verwendet wird, ist das Verfahren auch für Aerosole anwendbar.

Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par oscillation (ISO 2811-3:2023)

L'ISO 2811-3:2011 spécifie une méthode de détermination de la masse volumique des peintures, vernis et produits assimilés au moyen d'un oscillateur.
La méthode convient pour tous les produits, y compris les revêtements de consistance pâteuse. Si un type d'appareillage résistant à la pression est utilisé, la méthode est également applicable aux aérosols.

Barve in laki - Določanje gostote - 3. del: Oscilacijska metoda (ISO 2811-3:2023)

Standard ISO 2811-3:2011 določa metodo za določanje gostote barv, lakov in sorodnih izdelkov z uporabo oscilatorja.
Metoda je ustrezna za vse materiale, vključno s premazi, podobnimi pasti. V primeru uporabe tlačno odpornega aparata se metoda uporablja tudi za aerosole.

General Information

• Status: Published
• Publication Date: 07-Nov-2023
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 08-Nov-2023
• Completion Date: 08-Nov-2023
• Ref Project: SIST EN ISO 2811-3:2024 - Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2023)

Relations

• Replaces: EN ISO 2811-3:2011 - Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2811-3:2024
01-januar-2024
Nadomešča:
SIST EN ISO 2811-3:2011
Barve in laki - Določanje gostote - 3. del: Oscilacijska metoda (ISO 2811-3:2023)
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-
3:2023)
Beschichtungsstoffe - Bestimmung der Dichte - Teil 3: Schwingungsverfahren (ISO 2811
-3:2023)
Peintures et vernis - Détermination de la masse volumique - Partie 3: Méthode par
oscillation (ISO 2811-3:2023)
Ta slovenski standard je istoveten z: EN ISO 2811-3:2023
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 2811-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 2811-3:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 2811-3:2024


EN ISO 2811-3
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2811-3:2011
English Version

Paints and varnishes - Determination of density - Part 3:
Oscillation method (ISO 2811-3:2023)
Peintures et vernis - Détermination de la masse Beschichtungsstoffe - Bestimmung der Dichte - Teil 3:
volumique - Partie 3: Méthode par oscillation (ISO Schwingungsverfahren (ISO 2811-3:2023)
2811-3:2023)
This European Standard was approved by CEN on 2 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2811-3:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 2811-3:2024
EN ISO 2811-3:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 2811-3:2024
EN ISO 2811-3:2023 (E)
European foreword
This document (EN ISO 2811-3:2023) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2811-3:2011.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 2811-3:2023 has been approved by CEN as EN ISO 2811-3:2023 without any
modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 2811-3:2024

---------------------- Page: 6 ----------------------
SIST EN ISO 2811-3:2024
INTERNATIONAL ISO
STAND
...