FprEN 14528
(Main)Bidets - Functional requirements and test methods
Bidets - Functional requirements and test methods
This document specifies essential characteristics and test methods for establishing constancy of performance for bidets used for domestic purposes for personal hygiene, and made from either ceramics or stainless steel.
Domestic purposes include use in hotels, student accommodations, hospitals and similar buildings, except when special medical provisions are required.
Proper functioning of bidets can only be assumed when connected to a suitable drainage system (see EN 12056 2:2000 for more information). All drawings are examples only.
Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren
Dieses Dokument legt die wesentlichen Merkmale und Prüfverfahren zur Feststellung der Leistungsbestän digkeit von Bidets für den häuslichen Gebrauch fest, die für die persönliche Hygiene verwendet werden und entweder aus Keramik oder aus nichtrostendem Stahl bestehen.
Häusliche Zwecke schließen die Verwendung in Hotels, Studentenwohnheimen, Krankenhäusern und ähnli
chen Gebäuden ein, es sei denn, es sind besondere medizinische Vorkehrungen erforderlich.
Die ordnungsgemäße Funktion von Bidets kann nur dann vorausgesetzt werden, wenn sie an ein geeignetes Abflusssystem angeschlossen sind (siehe EN12056-2:2001 für weitere Informationen). Alle Zeichnungen sind nur Beispiele.
Bidets - Exigences fonctionnelles et méthodes d'essai
Le présent document spécifie les caractéristiques essentielles et les méthodes d’essai permettant d’établir la constance des performances des bidets à usage domestique, en céramique ou en acier inoxydable et destinés à être utilisés pour l’hygiène personnelle.
L’expression « à usage domestique » inclut l’utilisation en hôtels, en logements pour étudiants, en hôpitaux et autres bâtiments similaires, sauf si des précautions médicales particulières s’imposent.
Le bon fonctionnement des bidets ne peut être assuré que s'ils sont raccordés à un réseau d'évacuation approprié (voir l’EN 12056-2:2001 pour plus d’informations). Toutes les figures ne sont que des exemples.
Bideji - Funkcionalne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 14528:2023
01-februar-2023
Bideji - Funkcionalne zahteve in preskusne metode
Bidets - Functional requirements and test methods
Sitzwaschbecken - Funktionsanforderungen und Prüfverfahren
Bidets - Exigences fonctionnelles et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 14528
ICS:
91.140.70 Sanitarne naprave Sanitary installations
oSIST prEN 14528:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 14528:2023
---------------------- Page: 2 ----------------------
oSIST prEN 14528:2023
DRAFT
EUROPEAN STANDARD
prEN 14528
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2022
ICS 91.140.70 Will supersede EN 14528:2015+A1:2018
English Version
Bidets - Functional requirements and test methods
Bidets - Exigences fonctionnelles et méthodes d'essai Sitzwaschbecken - Funktionsanforderungen und
Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 163.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14528:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 14528:2023
prEN 14528:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms, definitions and abbreviations . 4
3.1 Terms and definitions . 4
3.2 Abbreviations . 5
4 Characteristics . 5
4.1 Cleanability . 5
4.2 Load resistance . 5
4.3 Capacity to overflow . 5
5 Testing, assessment and sampling methods . 6
5.1 General. 6
5.2 Determination of cleanability . 6
5.3 Determination of load resistance .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.