EN 13407:2015+A1:2018

Wall-hung urinals - Functional requirements and test methods

This European Standard specifies constructional and performance requirements together with test methods for wall-hung urinals made of vitreous china or stainless steel that are used for personal hygiene.
This European Standard does not apply to slab and stall urinals nor to waterless urinals.

Wandhängende Urinale - Funktionsanforderungen und Prüfverfahren

Diese Europäische Norm legt konstruktive und funktionelle Anforderungen sowie Prüfverfahren für wandhängende Urinale für die persönliche Hygiene, hergestellt aus Sanitärkeramik oder nichtrostendem Stahl, fest.
Diese Europäische Norm gilt nicht für Urinalstände und Urinalwände sowie wasserlose Urinale.

Urinoirs muraux - Prescriptions fonctionnelles et méthodes d'essai

Cette Norme Européenne spécifie les prescriptions relatives à la construction et à la performance des urinoirs muraux en céramique sanitaire émaillée ou en acier inoxydable utilisés pour l’hygiène personnelle ainsi que les méthodes d’essai correspondantes.
Cette Norme Européenne ne s’applique ni aux plaques et stalles d’urinoirs ni aux urinoirs sans eau.

Zidni pisoar - Funkcionalne zahteve in preskusne metode

Ta evropski standard določa konstrukcijske zahteve in zahteve glede zmogljivosti skupaj s preskusnimi metodami za zidne pisoarje, izdelane iz emajlirane keramike ali nerjavnega jekla, ki se uporabljajo za osebno higieno.
Ta evropski standard se ne uporablja za talne pisoarje in pisoarje s predelki ali za brezvodne pisoarje.

General Information

• Status: Published
• Publication Date: 16-Oct-2018
• ICS: 91.140.70 - Sanitary installations
• Technical Committee: CEN/TC 163 - Sanitary appliances
• Drafting Committee: CEN/TC 163/WG 3 - Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 11-May-2021
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/110 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on sanitary appliances
• Ref Project: SIST EN 13407:2015+A1:2018 - Wall-hung urinals - Functional requirements and test methods

Relations

• Merged From: EN 13407:2015 - Wall-hung urinals - Functional requirements and test methods
• Effective Date: 19-Jan-2023
• Merged From: EN 13407:2015/prA1:2017 - Wall-hung urinals - Functional requirements and test methods
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Zidni pisoar - Funkcionalne zahteve in preskusne metodeWandhängende Urinale - Funktionsanforderungen und PrüfverfahrenUrinoirs muraux - Prescriptions fonctionnelles et méthodes d'essaiWall-hung urinals - Functional requirements and test methods91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 13407:2015+A1:2018SIST EN 13407:2015+A1:2018en,fr,de01-december-2018SIST EN 13407:2015+A1:2018SLOVENSKI
STANDARDSIST EN 13407:20151DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13407:2015+A1
October
t r s z ICS
{ sä s v rä y r English Version
Wallæhung urinals æ Functional requirements and test methods Urinoirs muraux æ Prescriptions fonctionnelles et méthodes d 5essai
Wandhängende Urinale æ Funktionsanforderungen und Prüfverfahren This European Standard was approved by CEN on
w June
t r s w and includes Amendment
approved by CEN on
s v April
t r s zä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s z CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u v r yã t r s w ªA sã t r s z ESIST EN 13407:2015+A1:2018

Test rig for urinals intended to be flushed by a flush valve . 18 Annex B (normative)
Test rig for urinals intended to be flushed by a manually operated flushing cistern . 20 Annex C (normative)
Test rig for urinals intended to be flushed by an automatic flushing cistern with valve-less outlet device . 24 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No. 305/2011 . 26 Bibliography . 28
This document supersedes !EN 13407:2015". The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. For relationship with EU Construction Products Regulation, see informative Annex ZA, which is an integral part of this document. !The main changes introduced in EN 13407 were the following: a) introduction of a new Annex ZA according to the latest template (in the format of TF N 678 rev 1 of 2015-06-02); b) modification of the marking of products;
c) modification of the clause “Test samples, testing and compliance criteria”; d) editorial modifications as agreed between representatives of EU/DG Growth, CEN/TC 163 and FECS on 2016-07-07 in Brussels for citation of standard in OJEU." According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13407:2015+A1:2018

Figure 1 — Wall-hung urinal 3.2 slab urinal sanitary appliance comprising a floor channel and a slab or sheet fixed to a wall, for receiving urine and water used for flushing and directing both into a drainage system Note 1 to entry: See Figure 2:
Figure 2 — Slab urinal SIST EN 13407:2015+A1:2018

Figure 3 — Stall urinal 3.4 urinal with siphonic action urinal in which urine is removed by siphonage (suction) induced by flushing water flowing through either an integral trap or a dedicated separate trap assembled in accordance with the manufacturer's instruction 3.5 wash-down urinal non-siphonic acting urinal with or without integral trap 3.6 waterless urinal sanitary appliance for receiving urine and directing it into a drainage system, which functions without the use of water 3.7 flushing cistern cistern for storage and discharge of a defined volume of flushing water for removal of urine from urinals 3.8 flush valve valve connected directly to a water supply, which delivers a pre-determined volume of flushing water for removal of urine from a urinal 3.9 cleanability characteristics which allow surfaces intended to come into contact with water and/or urine and cleansing materials to be visibly smooth, non-absorbent and free from acute internal corners, such that they can be kept visibly free from dirt and/or stains when subject to a regular maintenance regime, which may include, when appropriate, specific instructions for use and care specified by the manufacturer 3.10 product type !set of representative performance levels or classes of a construction product, in relation to its essential characteristics, produced using a given combination of raw materials or other elements in a specific production process Note 1 to entry: This definition is taken from Regulation (EU) No. 305/2011." SIST EN 13407:2015+A1:2018

4.2 Flushing volume and flow rate The flushing volumes and flow rates for particular flushing devices shall be as given in Table 2. Table 2 — Flushing devices, volumes and flow rate
Flushing device for testing !Sub-type" of urinal Flush valve (C) in accordance with Annex A Manually operated flushing cistern (A) in accordance with Annex B Automatic flushing cistern (B) in accordance with Annex C
Flushing volume l Flow rate l/s Flushing volume l Flushing volume l I
0,50,10,2+−
II > 0,5
5,0 0,22,01,0+− > 0,5
5,0 — III
0,2
> 0,5
4,5 IV
0,51,04,0+−
...