EN ISO 14314:2009
(Main)Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements (ISO 14314:2004)
ISO 14314:2004 specifies the safety requirements for RIC engine re-coil starting equipment intended for use on reciprocating internal combustion engines for land, rail and marine use, excluding engines intended for use to propel road vehicles and aircraft. It may be applied to engines intended for use to propel construction and earth-moving machines and for other applications where no other suitable International Standards exist.
In addition to the technical safety requirements, it also contains the method of checking the adherence to these requirements.
This International Standard only addresses the hazards associated with the installation and operation of re-coil starting equipment.
It is primarily directed at machines which are manufactured after the date of publication of this International Standard.
Hubkolben-Verbrennungsmotoren - Reversierstarteinrichtung - Allgemeine Sicherheitsanforderungen (ISO 14314:2004)
Diese Norm legt die Sicherheitsanforderungen für Reversierstarteinrichtungen an Hubkolben-Verbrennungs-motoren fest, für Hubkolben-Verbrennungsmotoren zur Verwendung an Land, auf der Schiene oder für den Schiffsbetrieb. Ausgenommen sind Motoren zum Antrieb von Straßenfahrzeugen und Flugzeugen. Diese Norm darf auch für Motoren zum Antrieb von Straßenbau- und Erdbewegungsmaschinen und für andere Verwendungen angewandt werden, falls für diese Motoren keine entsprechende Internationale Norm vorliegt.
Ergänzend zu den sicherheitstechnischen Anforderungen legt diese Norm auch Maßnahmen zur Feststellung der Übereinstimmung mit diesen Anforderungen fest.
Diese Norm beschreibt nur die Gefährdungen, die im Zusammenhang mit der Installation und dem Betrieb von Reversierstarteinrichtungen verbunden sind.
Diese Internationale Norm gilt in erster Linie für Maschinen, die nach dem Erscheinungsdatum dieser Internationalen Norm hergestellt werden.
Moteurs alternatifs à combustion interne - Dispositifs de démarrage à réenrouleur - Exigences générales de sécurité (ISO 14314:2004)
L'ISO 14314:2004 spécifie les exigences relatives aux dispositifs de démarrage à réenrouleur équipant les moteurs alternatifs à combustion interne pour les applications terrestres, ferroviaires et marines, à l'exception des moteurs utilisés pour propulser les véhicules routiers et les aéronefs. Elle peut s'appliquer aux moteurs utilisés pour propulser des engins servant à la construction et des engins de terrassement, ainsi que dans le cadre des applications pour lesquelles il n'existe aucune Norme internationale appropriée.
L'ISO 14314:2004 contient, outre les prescriptions techniques de sécurité, les procédures de contrôle du respect de ces prescriptions.
Elle couvre uniquement les phénomènes dangereux associés à l'installation et au fonctionnement des dispositifs de démarrage à réenrouleur.
L'ISO 14314:2004 s'adresse principalement aux machines qui sont fabriquées après sa date de publication.
Batni motorji z notranjim zgorevanjem - Povratni zaganjalnik - Splošne varnostne zahteve (ISO 14314:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 14314:2009
01-oktober-2009
1DGRPHãþD
SIST EN ISO 14314:2004
Batni motorji z notranjim zgorevanjem - Povratni zaganjalnik - Splošne varnostne
zahteve (ISO 14314:2004)
Reciprocal internal combustion engines - Recoil starting equipment - General safety
requirements (ISO 14314:2004)
Hubkolben-Verbrennungsmotoren - Reversierstarteinrichtung - Allgemeine
Sicherheitsanforderungen (ISO 14314:2004)
Moteurs alternatifs à combustion interne - Dispositifs de démarrage à réenrouleur -
Exigences générales de sécurité (ISO 14314:2004)
Ta slovenski standard je istoveten z: EN ISO 14314:2009
ICS:
27.020 Motorji z notranjim Internal combustion engines
zgorevanjem
SIST EN ISO 14314:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 14314:2009
---------------------- Page: 2 ----------------------
SIST EN ISO 14314:2009
EUROPEAN STANDARD
EN ISO 14314
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2009
ICS 27.020 Supersedes EN ISO 14314:2004
English Version
Reciprocal internal combustion engines - Recoil starting
equipment - General safety requirements (ISO 14314:2004)
Moteurs alternatifs à combustion interne - Dispositifs de Hubkolben-Verbrennungsmotoren -
démarrage à réenrouleur - Exigences générales de sécurité Reversierstarteinrichtung - Allgemeine
(ISO 14314:2004) Sicherheitsanforderungen (ISO 14314:2004)
This European Standard was approved by CEN on 3 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14314:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 14314:2009
EN ISO 14314:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37/EC .4
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .5
2
---------------------- Page: 4 ----------------------
SIST EN ISO 14314:2009
EN ISO 14314:2009 (E)
Foreword
The text of ISO 14314:2004 has been prepared by Technical Committee ISO/TC 70 “Internal combustion
engines” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
14314:2009 by Technical Committee CEN/TC 270 “Internal combustion engines” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at
the latest by January 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14314:2004.
This European Standard has been prepared under a mandate given to CEN by the Commission of the
European Communities and the European Free Trade Association, and supports essential requirements of the
EU Machinery Directive (2006/42/EC) and the associated EFTA regulations.
For relationship with EC Directives, see informative Annex ZA and ZB, which are integral parts of this
document.
According to the CEN/CENELEC Internal Regulations, the national standar
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.